Estimate the surface temperature of the pod if the air

Assignment Help Mechanical Engineering
Reference no: EM13611969

A spherical, underwater instrument pod used to make soundings and to measure conditions in the water has a diameter of 95 mm and dissipates 350 W. Estimate the surface temperature of the pod when suspended in a bay where the current is 1.5 m/s and the water temperature is 18°C. Inadvertently, the pod is hauled out of the water and suspended in ambient air without deactivating the power. Estimate the surface temperature of the pod if the air temperature is 18°C and the wind speed is 3 m/s the wind speed is 3 m/s

Reference no: EM13611969

Questions Cloud

A cohort study is not an appropriate study design in this : a 5-year prospecta 5-year prospective cohort study has just been completed. the study was designed to assess the
Suppose x represents a point picked at random from the : suppose x represents a point picked at random from the interval 0.1 on the x-axis and y is a point picked at random
The x-component of a velocity vector that has an angle of : the x-component of a velocity vector that has an angle of 32 degrees to the x-axis has a magnitude of 6.0 ms. what is
If a random sample of 65 married women are selected what is : sociologists say that 80 of married women claim that their husbands mother is the biggest bone of contention in their
Estimate the surface temperature of the pod if the air : a spherical underwater instrument pod used to make soundings and to measure conditions in the water has a diameter of
A capacitor is to be made of two parallel plates of gold : a capacitor is to be made of two parallel plates of gold separated by a sheet of plastic. the plastic sheet is 1 mm
While chopping down his fathers cheery tree george : while chopping down his fathers cheery tree george discovered that if he swung the axe initially at rest with a speed
A driver of a car is repeatedy driving around a roundabout : a driver of a car is repeatedy driving around a roundabout with a diameter of 100feet . the driver is traveling around
If the coefficient of static friction between the box and : a 2.0 kg box rests on a plank that is inclined at an angle of 65deg above the horizontal. the upper end of the box is

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A spherical balloon contains 2 kg of water at 230 degrees c

a spherical balloon contains 2 kg of water at 230 degrees c 400 kpa the specific volume is 0.5951 m3kg. the balloon

  What is the change in enthalpy in kjkg of oxygen as its

what is the change in enthalpy in kjkg of oxygen as its temperature changes from 150 to 200oc? is there any difference

  If a batch formula for 1950 kg of window glass consists of

if a batch formula for 1950 kg of window glass consists of 200 kg of na2co3 1500 kg sio2 and an unknown amount of

  Determine the rate of heat loss from the molten salt

Determine the rate of heat loss from the molten salt per meter length of the pipe.

  At the exit the pressure is 24 bar and the temperature is

air flows through a well-insulated nozzle operating at steady state. at the inlet the pressure is 5 bar the temperature

  Explain the factor

explain the factor, which inhibit the use of a very high resolution and a large number of colors for display in the case of raster scanning display devices.

  A soap bubble with walls 398 thick floats in air if this

question a soap bubble with walls 398 thick floats in air. if this bubble is illuminated perpendicularly with sunlight

  Find the axial stress in individual component

The system shown below is deflected in compression by 6 = 0.014 in. For individual components 1, 2 & 3 find the axial stress in individual component

  The rigid bar ac is supported by a pin at f and two

the rigid bar ac is supported by a pin at f and two identical links bd and ce. the length between point a and b is 22

  A plate fin heat exchanger for truck is designed to cool

a plate fin heat exchanger for truck is designed to cool high temperature and high pressure oil using high pressure

  Block a and b weigh 100 lb and 60 lb respectively if block

block a and b weigh 100 lb and 60 lb respectively. if block a has a center of gravity at g as shown determine the

  For the values of bhd and z provided determine the

the structure consists of a quarter-circular rod ab with radius 150mm that is fixed in the xy plane. cd is a straight

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd