Estimate at the beginning and end of combustion the mach

Assignment Help Mechanical Engineering
Reference no: EM13619842

The diameter of the hollow core of a solid propellant grain remains axially uniform during burning. Its length is 5 m, and initially its inner diameter is 0.37m; the outer diameter of the grain is 0.82m. The burning rate r is 1.2cm/s, which as a first approximation may be assumed uniform over the entire inner surface of the grain. The grain density is 1875 kg/m^3. The combustion chamber pressure and gas temperature downstream of the grain are 2.17 MPa and 2580K, respectively. Neglecting the effects of friction, estimate, at the beginning and end of combustion:

a) The static pressure ratio p2/p1 along the length of the grain

b) The Mach number M2 at the downstream end of the grain The gas specific heat ratio and molecular weight are 1.2 and 20.

Reference no: EM13619842

Questions Cloud

Kolbys korndogs is looking at a new sausage system with an : kolbys korndogs is looking at a new sausage system with an installed cost of 765000. this cost will be depreciated
The escape velocity of a bullet from the surface of planet : the escape velocity of a bullet from the surface of planet y is 1631 ms. calculate the escape velocity from the surface
What is the value of an investment that pays 20000 every : what is the value of an investment that pays 20000 every other year forever if the first payment occurs one year from
The lifting force does work in raising the helicopter an : a helicopter starting from rest accelerates straight up from the roof of a hospital. the lifting force does work in
Estimate at the beginning and end of combustion the mach : the diameter of the hollow core of a solid propellant grain remains axially uniform during burning. its length is 5 m
A truck is traveling at 111 ms down a hill when the brakes : a truck is traveling at 11.1 ms down a hill when the brakes on all four wheels lock. the hill makes an angle of 14.0deg
Galehouse gas stations inc expects sales to increase from : galehouse gas stations inc. expects sales to increase from 1690000 to 1890000 next year. mr. galehouse believes that
A 380 muf capacitor that is initially uncharged is : a 3.80 muf capacitor that is initially uncharged is connected in series with a 7.60 k ohm resistor and an emf source
What is the resistance in an rl circuit with l 3821 mh if : what is the resistance in an rl circuit with l 38.21 mh if the time taken to reach 83.0 of its maximum current value

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The heat rejection is an isothermal process at 37 c what is

a a refrigeration system has a coeiumlnotfnofcient of performance of 5. the heat rejection is an isothermal process at

  What steel specification suitable for structural application

Find the stress in both members shown below and what steel specifications (types of steel) are suitable for structural applications?

  If the maximum tension the cable can withstand is 100n and

at t0 a disk with mass 3kg is placed on a spinning platform. the disk slides and begins to accelerate. if the maximum

  Determine steam enters a the velocity at the exit in ms b

consider a horizontal pipe of diameter 20 cm. steam enters the pipe as a saturated vapor at 0.5 mpa with a velocity of

  Clculate work per unit mass by incorporating an ideal

you are to design an air compressor with an inlet pressure of 100 kpa an inlet temperature of 300 k and anexit pressure

  Find equations for rtheta periodtheta vtheta tensiontheta

consider a conical pendulum that is a ball of mass m at the end of a string of length li moving in a horizontal circle

  Determine the pressure, temperature and enthalpy at entrance

A heat pump uses refrigerant-134a as the working fluid in an ideal vapour-compression refrigeration cycle between 0.14 and 0.8 MPa. The refrigerant leaves the compressor at a temperature of 40° C. Determine the pressure, temperature and enthalpy a..

  How deep is the notch

A block of metal has a 90 notch cut from its lower surface. The notched part rests on a circular cylinder of diameter 2.0 cm, as shown in Fig. 4.15. If the lower surface of the par is 1.3 cm above the base plane, how deep is the notch?

  Determine the distance traveled

a truck travelling along a straight road at speed 20 km/hr increases its speed to 120 hr/hr in time 15 sec.If its acceleration is constant, determine the distance traveled.

  A ten-station rotary indexing machine performs nine

a ten-station rotary indexing machine performs nine machining operations at nine workstations and the tenth station is

  What is the reason for the system -to increase the air

what is the reason for the system? -to increase the air pressure from 100 to 1200 kpa design uses dual compressors to

  What is the fraction recovery of the enzyme and the amount

suppose that 100 lmin are drawn from a fermentation tank and passed through an extraction tank in which the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd