Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Draw ray inside the core by using matlab, draw three circles or four circles with different angles, so every circle has different angle.
The circle until you see circle in the middle f every circle, so every circle has a small circle in the middle. I need three circles with different angles, respectively, 30,50 and 70.
Attachment:- img.jpeg
A dc series motor of 230 V, 12 hp, 1200 rpm is connected to a 230 V supply. It draws a current of 40 A, and rotates at 1200 rpm. Ra = 0.25 ohms and Rs = 0.1 ohms. Assume magnetic linearity.
A series-connected circuit has a 240-V voltage source, a 10- resistance, a 5- resistance, and an unknown resistance Rx. The voltage across the 5-? resistance is 30 V. Determine the value of the unknown resistance.
For the feedback voltage amplifier let the op amp have an infinite input resistance, a zero output resistance, and a finite open-loop gain A = 10^4 V/V. If R1 = 1 kOhms, find the value of R2 that results in a closed-loop gain of 100 V/V.
why does the instruction set include an INC (DEC) instruction to increment (decrement) a memory byte when the same function could be accomplishe using an ADD (SUB) instruction
On a logarithmic vertical axis from 1ohm to 1Gohm, and a logarithmic horizontal axis from 1rad/sec to 10^9 rad/sec, sketch the following: a) A 1 kOhm resistor and a 1 mH inductor in parallel and (separate curve) in series.
A 60-Hz, single phase source with V= 277 at angle 30 degree volts is applied to a circuit element. Determine the instanaeous power, real power, and reactive power absorbed by determine the source power factor and state lagging or leading.
A PWM unit is set-up with a pre-scale factor of 128. If the PWMPER register is loaded with 34 and the PWMDTY is loaded with 3, what are the resultant values for the output period and pulse width
Determine the energy delivered to the resistor between t=0 and t=8. If the voltage across the same resistor is found to be v(t)=10sin(2pt) V, calculate the energy delivered to the resistor between t=0 and t=2s. The argument of the sine function (2p..
A parallel-plate capacitor has capacitance 9.00 µF. (a) How much energy is stored in the capacitor if it is connected to a 9.00 V battery (b) If the battery is disconnected and the distance between the charged plates doubled
Each pole of a 100kW, 250v flet-compound generator has a shunt field of 2000 turns and a series field of 7 turns. If the total shunt field resistance is 100 ohms, calculate mmf when the machine operates at rated voltage.
Design a continuous antenna array to have the following soace factor : [(sin(2πcosθ))/(2πcosθ)] , at a wavelength λ=.5 m namely,find : i- the current distribution and the length of the array. ii-the relative side lobe level.
A transistor amplifier has a midband gain of -120, a high cutoff frequency of 36 kHz, and a bandwidth of 35.8 kHz. In addition,the actual response is also about -15 dB at f=50 Hz. Write the transfer function for the amplifier.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd