Draw poles and zeros for the closed loop transfer function

Assignment Help Electrical Engineering
Reference no: EM13974452

Problem 1:

Obtain the z transform of the curve x(t) shown in Figure below. Assume that sampling period is 1 sec. Provide the expression in closed form.

398_z transform.png

Problem 2:

Given the following analog signal

x(t) = 3cos (500 Πt + Π/3)+ 2cos (3500 Πt - Π/4)

(a) Determine the minimum Nyquist sampling rate fs.

(b) Determine the sampled data sequence x(n) for the sampling frequency fs = 1000 Hz

(c) What is the reconstructed analog signal from the above samples? Show the mathematical expression for the reconstructed signal. Is the reconstructed signal same as the original signal?

(d) Does aliasing or folding occur during this sampling and reconstruction process? Explain why'?

Problem 3:

Find the inverse Z transform of the following: (not by long division)

X(z) = z2/(z -2)(z2 +4z +5)

Draw first 10 samples from the inverse Z transform to show that the system is unstable.

Problem 4:

Albo is a sophisticated entertainment robot. Albo looks like a Chihuahua and wags its tail, does tricks, goes for walk and grabs the ball when he is told to do so. Albo depends on a wide range of sensors including touch, color CCO camera, and range finders. Alba is a digitally controlled system as shown below and the transfer function of the Albo has been adjusted as follows:

1535_z transform1.png

A step input r(t) rs applied to Albo through a remote controlled device in order to grab a ball Assuming sampling interval is 0 5 sec. do the following:

(i) From Gp(s) determine GZ(s) with zero order hold

(ii) Determine overall transfer function T(z) for the system with unity feedback

(iii) Determine the expression for output Y(z) for stop input r(t) = 1

(iv) Determine the final value of Y(k) as k approaches to ∞.

Problem 5:

a) Determine the closed loop transfer function for the following system

878_z transform2.png

Assume the transfer function Gp(s) =

(s +1)/(s2 + 5s + 6)

(b) Draw the poles and zeros for the closed loop transfer function and determine whether the system is stable or unstable.

Reference no: EM13974452

Questions Cloud

Compute the activity rate for each activity cost pool : Compute the activity rate for each activity cost pool. Compute the total activity costs that would be assigned to University and Memorial.
My ethical philosophy based on kant''s : Write based on your current ethical philosophy using the following ethical principles, and include examples for each (use the information in your textbook as a guide):
Question regarding the financial statements : Indicate by letter how each of the following usually should be classified. If an item should appear in a note to the financial statements, use the letter ?oN?? to indicate this fact. If an item need not be reported at all on the balance sheet, use..
Corporate strategic audit : You have been hired by United Airlines (UA) to perform a corporate strategic audit. With respect to UA, which of the following statements are true concerning American Airlines (AA)? A. AA is a competitor to UA B. AA represents a rivalry to UA C. B..
Draw poles and zeros for the closed loop transfer function : Draw the poles and zeros for the closed loop transfer function and determine whether the system is stable or unstable and determine overall transfer function T(z) for the system with unity feedback
What for hume is the source of the moral sense : What for Hume is the source of the moral sense and moral judgements? Give an example.
What are the conditions of an efficient resolution : If there is a law restricting late-night parties then what the college students do? Can there be an efficient outcome?
Compute soto gross pay : During the past week, Soto worked 8 hours each day Monday through Thursday, 11 hours on Friday, and 6 hours on Sunday. Compute Soto's gross pay for the past week
Why,according to the "principle of equality : Why, according to the "principle of equality" must one show that there are real differences rather than just surmise that they exist?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the minimum number of flip-flops that can be used

A finite state recognizer or sequence detector has one input (X) and one output (Z). The output is asserted high (Z=1) whenever the input sequence 1101 has been observed during the past four clock cycles, as long as 1110 has never been observed.

  Find the intrinsic gain of an nmos transistor fabricated

Find the intrinsic gain of an NMOS transistor fabricated in a process for which k'n=200uA/V^2 and V'A=20Vum. The transistor has a 0.5-um channel length and is operated at Vov = 0.25. If a 2-mA/V transconductance is required, what must Id and W be

  Determine what value of fa is perceived from the samples

If a sonusoidal waveform has a frequency fo=1,010Hz and is sampled with fs=100Hz, what value of fa is perceived from the samples

  Determine how much power is each bulb absorbing

three light bulbs (P1= 30W, P2=40W, P3=50W) are connected in series to a 120v source find the current i through the bulbs. Each bulb is rated 120 volts. how much power is each bulb absorbing do they generate much light

  Design op-amp astable multivibrator to have output frequency

Design an op-amp astable multivibrator to have an output frequency of 400Hz and the frequency should be adjustable by plus or minus 20%. Use a 741 op-amp with supply of plus or minus 18 volts.

  What are the factors on which the width depends

Space charge region how it is formed and what are the factors on which the width of this region depends

  Find which shifts the resonant frequency of a tank circuit

3. Which of the following is not an advantage of FETs over BJTs in RF amplifier usage. A) Their input impedance does not load down the Q of the circuit preceding the FET stage. B) The availability of dual gate FETs provides an isolated injection poin..

  Derive a state table for the mealy sequential circuit

A mealy sequential circuit has one input (x) and one output (z). z can be 1 when the fourth, eighth, twelfth, etc. inputs are present, and z=1 if and only if the most recent input combined with the preceding three inputs was not BCD encoding of a ..

  Determine what is the total sorurce current

A resistor R is in series with a parallel LC circuit. The individual component values are R=150ohm, XL=j100ohm, Xc=-j50ohm. what is the total sorurce current, Is?

  Why has lead-free solder replaced lead-based solder

What is the purpose of core in hollow solder wire What is tinning, and why is it important Why is safety so important when soldering Why has lead-free solder replaced lead-based solder

  What data is stored in each memory location in the rom

You want to design a LUT toimplement an adder. The adder takes as input two 2-bit numbers. (a) What is the minimum size ROM that will be required. (b) What data is stored in each memory location in this ROM

  Show the equivalent noise figure of the repeater section

An analog repeater section consists of an amplifier with 15 dB noise figure, followed by a coaxial cable with a loss of 40 dB. Show a) the required gain of the amplifier b) The equivalent noise figure of the repeater section

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd