Does the load absorb or generate magnetizing vars

Assignment Help Electrical Engineering
Reference no: EM13286628

A load consisting of a 480 ohm resistor in parallel with a (5/9) uF capacitor is connected across the terminals of a sinusoidal voltage source, vg, where vg=240cos5000t V.
a) What is the peak value of the instantaneous power delivered by the source?
b) What is the peak value of the instantaneous power absorbed by the source?
c) What is the average power delivered to the load?
d) What is the reactive power delivered to the load?
e) Does the load absorb or generate magnetizing vars?
f) What is the power factor of the load?
g) What is the reactive factor of the load?

Reference no: EM13286628

Questions Cloud

Explain the electronic transition : Consider the electronic transition from n = 4 to n = 1 in a hydrogen atom, and select the correct statement below.
Determine input-output relation of the filter in time domain : (a)compute the magnitude response H(w), and phase response of the filter. (b) determine the input-output relation(difference equation) of the filter in the time domain. (c) compute the output of the system if the input is x(n)=2cos(πn/6 +45o) -∞
Explain the photon emitted or absorbed during an electronic : The photon emitted or absorbed during an electronic transition between n = 1 and n = 2 in a hydrogen atom has a wavelength in the visible portion of the electromagnetic spectrum and an energy that is greater than a similar electronic transition
Find how much is on the outer surface of the car : During a violent storm, a car is struck by a failing high-voltage wire that puts an excess charge of -850 mircoC on the metal car. how much is on the outer surface of the car
Does the load absorb or generate magnetizing vars : A load consisting of a 480 ohm resistor in parallel with a (5/9) uF capacitor is connected across the terminals of a sinusoidal voltage source, vg, where vg=240cos5000t V. a) What is the peak value of the instantaneous power delivered by the source
Explain an unknown solution produces absorbance : Analysis of an unknown solution produces absorbance values of: 0.45 @ lambda max for B 0.75 @ lambda max for A What is the molar concentration of the unknown
What effect does the diode barrier potential have on voltage : what effect does the diode barrier potential have on the difference between the peak input voltage and the peak output voltage. Explain
Determine the electric field just inside the paint layer : A charged paint is spread in a very thin uniform layer over the surface of a plastic sphere of diameter 12.0 cm, determine find the electric field just inside the paint layer
Explain electron affinities than most of the group : The Group 5A elements N,P,As have lower (less negative) electron affinities than most of the Group 4A or Group 6A elements because N,P,As have half-filled subshells.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Compute all sum bits using the a forementioned carry bits

(a) GivenX=(00111)2 and Y=(00110)2 , compute the carrybits using the equations for a CLA. How many time units would youneed to compute all the carry bits and why (b). Compute all the sum bits usingthe aforementioned carry bits.

  Find the maximum signal energy and design a demodulator

Suppose we transmitted 5 cos wct for logic one and 15 cos wct for logic zero. Find the maximum signal energy. Design a demodulator and show the detection criterion for the output of the demodulator. Finally, find the bit error-rate.

  Find the total complex power delivered to the capacitor

Two loads are connected in parallel. The voltage across the loads is 8kVrms. The first load is rated at 12 kW with a 0.6 lagging power factor. The second load is rated at 20 kVA with a 0.8 lagging power factor. Find the complex power of the two lo..

  Calculate the pressure the plates exert on the air in plates

A capacitor is made with very large plates separated a distance d. The potential between the plates is V=1000 volts and d = 1mm. a) Calculate the pressure the plates exert on the air between the plates.

  What is the gain of an ideal amplifier connected to drive

A power amplifier employs an output stage whose gain varies from 2 to 12 for various reasons. What is the gain of an ideal (non varying) amplifier connected to drive It so that an overall gain with feedback of 100 ± 5% V/V can be achieved

  What type or types of errors might be involved

The measurement of a current is repeated five times. The measured values are: 0.62, 6.21. 6.23, 6.18 and 6.24 mA. a. What type or types of errors might be involved: mistakes, systematic errors, random errors

  Find what is the current on the surface of the conductor

A plane wave is obliquelyincident on a perfectly conducting half-space. The magnetic field is perpendicular to the plane ofincidence. The incident E has an amplitude of1V/m,and the incident angle is θi. a. Write the fields in each region.

  Design band-pass filter consisting of an rc high-pass filter

a) Design a band-pass filter consisting of an RC high-pass filter with a cutoff frequency of 300 Hz and an RC low-pass filter with a cutoff frequency of 3400 Hz. Carefully select R and C of each filter so that one filter does not load the other

  Determine expression for the i-v characteristics of diode

An ideal n+/p diode has only the quasi neutral p region of length L illuminated with light such that GL electrons/cm3-s are generated uniformly throughout the region. There is no photo-generation occurring elsewhere in the diode.

  Design doping level on n-side at reverse break down voltage

Suppose you have a silicon wafer containing a p++n junction. Design the doping level on the n-side so that the reverse break down voltage is 45 V.

  Write an assembly code segment that calls the subroutine

Write an assembly code segment that calls the subroutine New Function if bits 5 and 6 of PORTD equal 1. Write the same code segment in part (a) using structured assembly constructs.

  What are the values of the rise time and response time

A thermometer, initially at a temperature of 75 degrees Fahrenheit is suddenly immersed into a tank of water with a temperature of 180 degrees Fahrenheit. The time constant of the thermometer is 4 s.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd