Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
An Si device is doped at 5*10 to the power of 16 cm-3. Assume that the device can operate up to a temperature where the intrinsic carrier density is less than 10% of the total carrier density. What is upper limit for the device operation?
Suppose you have a need for a D type flip-flop, but only have access to T type flip-flops. Implement a circuit equivalent to a D-type flip-flop with a t-type flip-flop and some extra logic gates.
How could risk management have aided in the development of the common What are the elements of direct labor costs and how should they be computed Explain the difference between recurring and nonrecurring costs as well as fixed versus variable costs
The efficiency and power factor for these conditions are 85 and 90% respectively. The combined windage, friction, and stray power losses are 1011W, the rotor conduction losses are 969W, and the stator conductor losses are 1559W.
find all minimum sum of products expressions. ( if there is more than one solution ,the number of solutions is given in parentheses.) label the solutions f1,f2.... a) f(w,x,y,z)= Σm(1,3,6,8,11,14)+Σd(2,4,5,13,15)
Design an amplifier circuit which uses an OpAmp and is powered by dual 15 V power supplies, and which has the following characteristic at low frequencies: Vout = 3V1 - 5V2 1. State the information which is extracted from the equation.
What fixed point unsigned representation, with how many bits and how many bits to the left of the binary point, should we use if we need to represent numbers in the range 0 - 100 with a resolution of .001 or better
A 10kVA, 200/400V 50Hz single-phase transformer gave the following test results. O/C test: 200V, 1.3A, 120W, on l.v. side. S/C test: 22V, 30A, 200W on h.v. side. (a) Calculate the magnetizing current and the component corresponding to core loss
a) draw a schematic diagram of the network showing all workstations, servers, segments and bridges (or gateways or routers or brouters). b) State which network software is used in the LAN and describe how the software facilitates the functions.
The probe band limited signal with fmax= 1Mhz was transmitted during the time T0=2 minutes. a) Find the maximum number of samples (N) that can be sent through the channel during T0 without losing of information. b) Find the sample rate (samples/s)
A recording engineer works in a soundproofed room that is 36.5 dB quieter than the outside. If the sound intensity in the room is 1.34 x 10-10 W/m2, what is the intensity outside
Assume that one of the pumps uses a1/4hp DC shunt motor with an input voltage of 115VDC that pulls 1.6A running at 1500 rpm. The filed resistance for the motor is 600 ohms and the armature resistance is 8.5 ohms. Find the constant KT for the motor..
1. A transfer function of a low pass filter may be divided into which three response ranges Actual response, ideal response, and straight-line response Gain, ripple, and roll-off Pass band, roll-off, and stop band Attenuation, gain, and roll-off
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd