Determine what is the average minority carrier lifetime

Assignment Help Electrical Engineering
Reference no: EM13283764

A light source generates 10^17 electron hole pairs per cm^3 persecond in an n-type sample doped ND = 10^16 cm^-3 and the average minority carrier lifetime is 10^-5 seconds. Is this Low level injection.

Reference no: EM13283764

Questions Cloud

How many bonds must be issued to net : If the face value of each bond is $1,000, how many bonds must be issued to net the $75 million? Assume that the firm cannot issue a fraction of a bond.
Find the amount of ice if any that remains : A 1.5kg- block of ice is initially at a temperature of -7.0C a)If 2.6×10^5J of heat are added to the ice,  Find the amount of ice, if any, that remains
Design a multiplexer which has four input lines : Design a multiplexer which has four input lines, two controllines, and one output line and a demultiplexer which has one input line, two control lines, and four output lines using truth tables and k-maps.
Explain dry ice is solid carbon dioxide : Dry ice is solid carbon dioxide. A 1.87g sample of dry ice is placed in an evacuated 4.03 L vessel at 22 degrees C. Calculate the pressure inside the vessel after all the dry ice has been converted to CO2 gas
Determine what is the average minority carrier lifetime : A light source generates 10^17 electron hole pairs per cm^3 persecond in an n-type sample doped ND = 10^16 cm^-3 and the average minority carrier lifetime is 10^-5 seconds. Is this Low level injection.
What is yield that trevor would earn by selling the bond : Trevor Price bought 10-year bonds issued by Harvest Foods five years ago for $964.05. The bonds make semiannual coupon payments at a rate of 8.4 percent. If the current price of the bonds is $1,071.10, what is the yield that Trevor would earn by s..
Calculate the speeders speed with respect to the ground : The wave reflects from the speeder's car and returns to the police car, where its frequency is measured to be 322 Hz less than the emitted frequency. Calculate the speeder's speed with respect to the ground.
With what initial velocity were the keys thrown : A student throws a set of keys vertically upward to his fraternity brother, who is in a window 3.60 m above. With what initial velocity were the keys thrown
What is the maximum strength of the waves electric field : The maximum strength of the magnetic field in an electromagnetic wave is 3.44E-6 T. What is the maximum strength of the wave's electric field

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine thermal equilibrium recombination rate of electron

A semiconductor, in thermal equilibrium, has a hole concentration of p0 = 2x10^16 cm^-3. The minority carrier life time = 3x10^-7 s. (Assume, ni = 10^10 cm^-3)

  Determine the velocity of block a after it has moved 2m

If the system is released from rest, determine the velocity of block A after it has moved 2m. Assume that the coefficient of kinetic friction between block A and the plane is 0.25 and that the pulley is weightless frictionless.

  Calculate the current with a forward bias of a voltage

A Si p+-n junction has a donor doping of 5*10^16 cm^-3 on the n side and a cross sectional area of 10^-3 cm^2. If τ(p)= 1μs and D(p) = 10cm^2/s, calculate the current with a forward bias of .5V at 300K.

  What is the relative permittivity er of the dielectric

Will the electric field inside change (how much if yes)? Will the stored energy in the capacitor change (how much if yes)?

  Develop pseudo-code for a program that will retrieve 2 bytes

Develop the pseudo-code for a program that will retrieve 2 bytes (NUM1 and NUM2) from memory, determine which is closest to the numeric value 50, and indicate the result by setting a variable named "CLOSEST" to 1 (if 1st byte is closest) or 2

  Find gain of the system and output voltage of audio system

In an audio system, the microphone produces a voltage of 10mV which is connected by a cable to an amplifier with a voltage gain of 30dB. The cable introduces a loss of 5dB. Find the gain of the system and output voltage.

  Write an expression for i1 of the form of imaginary part

We have v1(t)=10cos(wt+30degrees). The current i1(t) has an rms value of 5A and leads v1(t) by 20s. (The current and the voltage have the same frequency) Draw a phasor diagram showing the phasors.

  Develop a bipolar transistor amplifier with a voltage gain

The aim of this experiment is to develop a bipolar transistor amplifier with a voltage gain of minus 25. The amplifier must accept input signals from a source impedance of 1 kW and provide an undistorted output amplitude of 5 V when driving a 560..

  Determine what is the value of the voltage source

A two-resistor voltage divider consists of a 10 k and a 15 k ohm resistor, with the 10 k resistor connected to the voltage source and the 15 k resistor connected to ground. If the output voltage is 2.5 V across the 10 k resistor

  What is the non-zero range of the convolution of the two

A continuous-time (CT) function is non-zero over a range of its argument from 0 to 4. It is convolved with a function which is non-zero over a range of its argument from -3 to -1. What is the non-zero range of the convolution of the two

  What information can be gathered from a line spectrum plot

Discuss what is meant by line spectra and what information can be gathered from a line spectrum plot.  Discuss the similarities and differences between the Fourier Transform and the Laplace Transform.

  Find the flux linkages of the primary and secondary

A transformer has 100 turns on the primary (terminals 1-1') and 200 turns on the secondary (terminals 2-2'). A current in the primary causes a magnetic flux, which links all turns of both the primary and the secondary.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd