Determine the yearly electrical cost to operate this motor

Assignment Help Mechanical Engineering
Reference no: EM13620161

A 50 hp electric motor is powering a pump that operates for 8 hours a day for 360 days/year. For an industrial electrical rate of $0.045/kW-hr and a motor efficiency of 90%, (a) determine the yearly electrical cost to operate this motor. (b) Is it advisable to replace the motor with a new 95% efficient unit if the replacement cost (with trade in) is $5,000? Support your answer with an engineering analysis.

Reference no: EM13620161

Questions Cloud

What are the basic assumptions underlying multiple means : what are the basic assumptions underlying multiple means test and why do they
Concept simulation 252 illustrates the concepts pertinent : concept simulation 25.2 illustrates the concepts pertinent to this problem. a 2.80-cm-high object is situated 14.6 cm
Find the minimum sample size n needed to estimate u for the : find the minimum sample size n needed to estimate u for the given values of c s and ec 0.98 s6.4 e1assume that a
What velocity would a proton need to circle earth 1300 km : what velocity would a proton need to circle earth 1300 km above the magnetic equator where earths magnetic field is
Determine the yearly electrical cost to operate this motor : a 50 hp electric motor is powering a pump that operates for 8 hours a day for 360 daysyear. for an industrial
One-tail hypothesis testing the claim that the true mean : a shipping company claims its boxes can carry 36 lb. the production design allows the boxes to be uniform in
A 15 v battery is connected to a 3 ohm light bulb assume : a 1.5 v battery is connected to a 3 ohm light bulb assume resistance remains constant. the battery is rated to be able
Illustrate the refraction of a light ray from a medium of : illustrate the refraction of a light ray from a medium of higher speed to a medium of lower speed. label each of the
How many seconds will it take for the lactate concentration : an isolated muscle with cylindrical shape is stimulated repeatedly until the concentration of lactate in the muscle

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The discharge temperature is 400 c a heat loss of 10 kw is

a steam compressor is used to increase the pressure of saturated water vapor at 1000 kpa to 1500 kpa. the flow rate is

  Determine the work done during the process a by plotting

gas with an initial volume of 0.36 m3 is slowly compressed to a final volume of 0.16 m3 by a process during which the

  1 what happens to the cutting and thrust force as tool rake

1. what happens to the cutting and thrust force as tool rake angle and cutting speed are increased?2. how does the

  Determine the temperature at the final state

If the final pressure is 1.0 MPa, determine (a) the temperature (°C) at the final state and (b) the heat transfer (kJ) during this process.

  Calculate the force required in direct extrusion

Calculate the force required in direct extrusion of 1100-O aluminum from a diameter of 6 in. to 2 in. Assume that the redundant work is 30% of the ideal work of deformation, and the friction work is 25% of the total work of deformation.

  At time t 2 which particle has the higher velocity which

two particles are moving along a straight line starting beginning from x0 0 with a velocity of v0 10 at time t 0.

  Steam at 160 bar 480degc enters a two-stage turbine

steam at 160 bar 480degc enters a two-stage turbine operating at steady sate with a volumetricnbspflow rate of 800

  How larger surface edge crack can the advanced ceramics

conventional ceramics have a fracture toughness of about 5 while advanced ceramics may have 20. determine1 how larger

  Calculate a the work produced by the turbine per unit mass

a turbine that is well insulated runs on air. at steady state air enters at 0.5 mpa and 727 c and expands

  Determine the upper surface temperature of the wafer

heat treatment is common in processing semiconductor materials. a 200- mm-diameter silicon wafer with thickness of 725

  What is the desogestrel-only pill

In the paragraphs that follow, answers are provided to a number of key questions about desogestrel-only pills. What is the desogestrel-only pill?

  Employing the ideal gas model and ignoring potential energy

air enters an insulated diffuser operating at steady state at 1 bar -3 degrees c and 260 ms and exits with a velocity

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd