Determine the velocity of the water in the hose

Assignment Help Physics
Reference no: EM13271794

A long horizontal hose of diameter 3.2 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1 cm. Water squirts from the nozzle at velocity 12 m/sec. Assume that the water has no viscosity or other form of energy dissipation.

1) What is the velocity of the water in the hose ?

2) What is the pressure differential between the water in the hose and water in the nozzle ?

3) How long will it take to fill a tub of volume 100 liters with the hose ?

Reference no: EM13271794

Questions Cloud

Compute the distance between the observer and the sailboat : A sailboat on the ocean has a mast of height 18.5 m. When viewed through a pair of binoculars the mast has an angular size of 0.065 rad. compute the distance between the observer and the sailboat
Should the short-run effects on eps influence the choice : Should the short-run effects on EPS influence the choice between the two projects?
Which of the following statements about the relevant range : Which of the following statements about the relevant range is true?
Calculate the maximum space charge width in the silicon : Consider an oxide-to-n-type silicon junction at room temperature. The impurity doping concentration in the silicon is Nd=8 x 1015 cm-3. Calculate the maximum space charge width in the silicon.
Determine the velocity of the water in the hose : A long horizontal hose of diameter 3.2 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1 cm. detetmine the velocity of the water in the hose
Design 100 hp motor controller circuit which has push button : design a 100 hp motor controller circuit which has a push button to start and stop the motor. include an external cooling fan and a means to automatically shut down the motor is it overheats. Hint attach thermostat to case of motor.
What is the abgular frequency of this system : At t=0, the displacement x(0) of a block attached to a spring is -850 cm. The block's velocity v(0) is then -.920m/s, what is the abgular frequency of this system
Find how much power is dissipated by the transistor : at room temp a power transistor has beta of 160 and it is used in a DC dimmer circuit to control a 24 volt 120 watt lamp the lamp power supply is 48 volts dc and it can deliver a maximum of 21 amperes of current
Find the magnification of the heater element : Find the magnification of the heater element given that the mirror has a radius curvature of 46 cm and produces an image of the coils 2.6m away from the mirror

Reviews

Write a Review

Physics Questions & Answers

  What was the temperature at the beginning of the process

The loaded cab of an elevator has a mass of 3.0 x10^3 kg and moves 157m up the shaft in 23s at constant speed. At what average rate does force from the cable do work on the cab.

  How fast is the mass moving when leaves the spring

how fast is the mass moving when leaves the spring. Two forces, and , act at a point. has a magnitude of 9.00 and is directed at an angle of 65.0 degrees above the negative x axis in the second quadrant. has a magnitude of 6.00 and is directed at a..

  What will be the lemmings speed upon landing

A 400 g lemming (does anyone remember that old computer game?) waddles horizontally off a small 4.90 m high cliff with a speed of 0.5 ms-1.How far from the base of the cliff will the lemming land? What will be the lemmings speed upon landing.

  Find the force per unit length on the wire

An infinite plane current sheet coincides with the xy plane. The surface current density is K'=K' y-hat where K'=const, Find the force per unit length on the wire

  A wind blowing parallel to the ground gives the pingpong

A sled weighing 189N rests on a 15° incline, held in place by static friction. The coefficient of static friction is 0.50.

  What is the total tire area in contact with road

A fully loaded station wagon has a mass of 1690 kg. If each of its four tires is inflated to a gauge pressure of 211 kPa, what is the total tire area in contact with road.

  By what factor is the angular displacement changed

A machine part rotates at an angular speed of 0.48 rad/s; its speed is then increased to 2.8 rad/s at the angular acceleration of 0.61 rad/s2.

  The distance between the point of first contact

A man drags a 72.0 kg crate across the floor at a constant velocity by pulling on a strap attached to the bottom of the crate. The crate is tilted 26 degrees above the horizontal, and the strap is inclined 68 degrees above the horizontal. The center ..

  Calculate the rms voltage of the source

In an L-R-C series circuit, the rms voltage across the resistor is 28.0V , across the capacitor it is 91.0V,  What is the rms voltage of the source

  What minimum distance would you need to walk

You're standing on a carousel 1.34 m from its axis of rotation. What minimum distance would you need to walk to arrive at a position where your contribution to the total moment of inertia has doubled?

  Determine the rate of heat transfer to the carbon dioxide

Carbon dioxide gas is heated as it flows steadily through a 2.5-cm-diameter pipe. At the inlet, the pressure is 2 bar, determine the rate of heat transfer to the carbon dioxide, in kW

  State and in terms of the length of the vector

An air molecule is moving at a speed of 450 m/s. How many meters would the molecule move during 7.00 ms (milliseconds) if it didn't collide with any other molecules.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd