Determine the time taken for the product to freeze if it is

Assignment Help Mechanical Engineering
Reference no: EM13618016

A fruit juice containing 30% solids of molecular weight 100 g was placed in a tray (length =100 cm, height = 90 cm, width = 8 cm) in the freezer that uses propylene glycol that is at -30 C(celsius). The convective heat transfer coefficient between the product and the glycol is 200 W/m^2 K. If the specific heat,density, and thermal conductivity of the unfrozen product are 4000 J/kj K, 950 kg/m^3 and 0.5 W/m K respectively and that of the frozen product are 3900 J/kg K, 900 kg/m^3 and 1.6 W/m K respectively, Determine the time taken for the product to freeze if it is at its initial freezing point when it was placed in the blast freezer.

Reference no: EM13618016

Questions Cloud

Calculate the diameter of the 5th bright ring fringe if the : a drop of liquid of refractive index 1.58 is placed between a plano-convex lens and a plane glass plate which rests on
Assume constant specific heats where cwater 4179 kjkg-k : initially an insulated rigid tank contains 18.67 kg of water at 21.45oc and 101 kpa. the tank also contains a 3.66 kg
A trailer truck enters a 2 percent uphill grade traveling : a trailer truck enters a 2 percent uphill grade traveling at 72 kmh and reaches a speed of 108 kmh in 300 m. the cab
Rc inc just issued zero-coupon bonds with a par value of : 1.the cougar corporation has issued 20-year semi-annual coupon bonds with a face value of 1000. if the annual coupon
Determine the time taken for the product to freeze if it is : a fruit juice containing 30 solids of molecular weight 100 g was placed in a tray length 100 cm height 90 cm width 8
With what minimum speed must you toss a 150 ball straight : with what minimum speed must you toss a 150 ball straight up to just touch the 14--high roof of the gymnasium if you
There is an ongoing debate between the united states and : there is an ongoing debate between the united states and china regarding whether the chinese yuans value should be
At t 0 two flat slabs each 5 cm thick one at 0 degrees and : at t 0 two flat slabs each 5 cm thick one at 0 degrees and one at 20 degrees are stacked together and then the
Determine the stream ecomomy of the system assume that the : feed at 10 ccelsius containing 20 solids enters an evaporator operating at 90 ccelsius. saturated steam90 quality

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the maximum length of the surface crack you can

some aircraft component is fabricated from an aluminum alloy that has a plane strain fracture toughness of 35 mpa ?m.

  Find the velocity and acceleration of the end of the bar

a 600 mm diameter wheel rolls without slipping on a horizontal surface as shown. rod ab is attached to the wheel at a

  Five kilograms of water at saturated liquid phase fills in

five kilograms of water at saturated liquid phase fills in a piston-cylinder device at 150oc. the device is now heated

  A 1kg mass connected to a horizontal spring of stiffness

a 1kg mass connected to a horizontal spring of stiffness 1031 nm has a dry-sliding friction force of 2 n. the mass is

  Determine the power kw required to run the compressor

a two-stage air compressor operates at steady state compressing 10 m3min of air from 100kpa 300 k to 1200 kpa. an

  Determine the natural frecuency of the automobile

an automobile having a mass of 2000 kg deflects its suspension springs 0.02 m under static conditions. Determine the natural frecuency of the automobile in the vertical direction by assuming dumping to be negligible.

  A closed gas turbine unit uses neon as the working fluid

a closed gas turbine unit uses neon as the working fluid. there are two stages of compression with intercooling from

  1 with reference to basic constructional features contrast

1. with reference to basic constructional features contrast the methods of compression employed by positive

  Design of absorption column and the cooler

Design of absorption column and the cooler. Process design of other units should be completed along with pipe sizes.

  Determine the final velocity

Determine the Final Velocity, An object whose mass is 1 lb has a velocity of 100 ft/s. How would I determine the final velocity, in ft/s, if the kinetic energy of the object decreases

  If the elevation points a and b relative to the elevation

a contractor is required to prepare a soil surface so that its planar and the normal direction to the surface is within

  This process continues untilthe pressure in the tank falls

an insulated tank containing 0.4 m3 of saturated water vapor at 500kpa is connected to an initially evacuated

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd