Determine the reflection coefficient of the unknown load

Assignment Help Electrical Engineering
Reference no: EM13282101

The standing-wave ratio on a lossless 300transmission line terminated in anunknown load impedance is 2.5, and the nearest voltage minimum isat a distance 0.2λ from the load. Determine:
a. the reflection coefficient of the load,
b. the unknown load impedance ZL,

Reference no: EM13282101

Questions Cloud

Determine what is the new power factor of the total load : A bank of induction motors cosumes 36kW at 0.78pf lagging from a 60 Hz 240V RMS line. If 200μF of capacitors are placed in parallel with the load, what is the new power factor of the total load
Find the domain and range of the functions : Find the inverse function and give the domain and range of the functions f and f- and find the solution of the following equations, if the solution exists.
Business with a competitive advantage : What are some of the issues to consider in determining whether the Internet would provide your business with a competitive advantage?
Compute the speed of the electrons when they hit the screen : In a television tube, electrons inillially at rest are accelerated by a uniform electric field of magnitude 4 * 10 exp 5 N/C during the first 5 cm of the tube's length, find the speed of the electrons when they hit the screen
Determine the reflection coefficient of the unknown load : The standing-wave ratio on a lossless 300transmission line terminated in anunknown load impedance is 2.5, and the nearest voltage minimum isat a distance 0.2λ from the load. Determine: a. the reflection coefficient of the load,
Explain the thermochemical equations : Consider the following thermochemical equations : 8Mg(s) + Mg(NO3)2(s) ? Mg3N2(s) + 6MgO(s) ?H°rxn = -3884 kJ Mg3N2(s) ? 3Mg(s) + N2(g) ?H°rxn = +463 kJ 2MgO(s) ? 2Mg(s) + O2(g) ?H°rxn = +1203 kJ Use the above equations to calculate the ?H°f (in k..
What is the magnitude of the third charge : Two point charges q and 4q are at x=0 and x=L, respectively, and free to move. A third charge is placed so that the entire three-charge system is in static equilibrium. What is the magnitude of the third charge
What is the value of the current assets : Highland, Inc. has total assets of $16,200, net working capital of $3,900, owner's equity of $8,500, and long-term debt of $6,000. What is the value of the current assets?
How many memory chips are needed to build memory system : A mass memory system has 24 address lines and 16 data lines. (a) What is the size of this memory system (b) How many 64K x 8 memory chips are needed to build this memory system

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine what is the critical resistance rc for the circuit

An RLC circuit consists of a 25 mH inductor, a 0.001 µF capacitor and a variable resistor connected in series. The initial charge on the capacitor at t = 0 when the switch is closed is 1 mC. What is the critical resistance Rc for this circuit.

  Design rc low-pass filter to attenuate sinusoidal voltage

Using a 500 Ohm resistance, design an RC low-pass filter that would attenuate a 120-Hz sinusoidal voltage by 20 dB with respect to the DC gain.

  Define contains basic function in matlab files

Contains basic function in MATLAB files. Write MATLAB script(s) to plot the basic signals below in two subplots. The upper subplot should be a continuous waveform (don't do g) and the lower subplot should be a discrete plot.

  What is meant by the buses for networking of serial devices

1- a port device may have multi-byte data input buffers and data output buffers. what are the advantages of these 2- what are the advantages of DAA(Data Access Arrangement) and McBSP ports in DSPs

  What is percentage change of af corresponding to factor

A negative feedback amplifier has a close-loop gain Af=100 and an open-loop gain A=105. What is the feedback factor If a manufacturing error results in a reduction of A to 103, what close-loop gain results

  Find the rms current the motor draws from the supply

A small ac motor, draws 100 VA from its 120-Vrms, 60 Hz ac source and consumes 50 W. Find the rms current the motor draws from the supply.

  Find the complex-volt-amperes drawn from the line

A 50 hp, 460 V, three phase induction motor draws 61 amps when operating at rated voltage and at a power factor of 0.85 lagging when supplying a rated load. knowns: 1hp=746watts effeciency (n) = Pout/Pin = Pout/(Pout+losses)

  Display the completed matrix in the command window

Write a program that asks a user to input (one at a time) the four numbers to fill a 2x2 matrix. For each number entered, make sure the user knows which number is being entered.

  What is the approximate slant-range resolution

A pulse compression radar transmits rectangular chirp pulses with bandwidths of 500 MHz. What is the approximate slant-range resolution after Dolph-Chebyshev frequency weighting that results in 30-dB sidelobes

  Which of the branches in sequence would be mis-predicted

Assume that we try to predict this sequence with a BHT using one-bit counters. The counters in the BHT are initialized to the N state. Which of the branches in this sequence would be mis-predicted?

  How much time would take a processor to access ech memory

Predict how much time it would take a processor to access each memory location in a 64-bit address bus when the clock speed of the processor is 4 GHz and the memory speed is not the limiting factor

  Find rms value of burner current and burner average power

An Electric Range top burner control adjusts the duty cycle of the current and voltage supplied to surface heating element as a function of the control's dial setting. The range controller operates from a 240 VRMS single phase supply

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd