Determine the phase shift between the 3-phase voltage output

Assignment Help Electrical Engineering
Reference no: EM13262349

Three single-phase transformers rated at 15kVA, 480V/120V,60Hz are connected in delta to function as autotransformers on a 600V,3-phase line. The H1,H2,X1,X2 polarity marks appear on the metal housing.

a. Show how the transformers should be connected.
b. Determine the 3-phase voltage output of the transformer.
c. Determine the phase shift between the 3-phase voltage output and the 600V,3-phase input.

Reference no: EM13262349

Questions Cloud

How do graphical representations relate to the phase angles : When making an impedance diagram, does inductive reactance go on the positive Y-axis, or the negative Y-axis. How about capacitive reactance. How do these graphical representations relate to the phase angels of the reactances.
Determine thickness of aluminum thinfilm based on parameters : A quartz crystal microbalance (QCM) was employed in a vacuum deposition process, where a thin film of aluminum was grown over a p-Si wafer. The oscillator frequency at the start of the process was 10.0050 MHz.
Calculate the radius of curvature of the mirror : The image of a very distant car is located 18 cm behind a convex mirror. What is the radius of curvature of the mirror
Explain contains only methane and propane : A gaseous fuel mixture stored at 752 mmHg and 298 K contains only methane and propane . When 11.6L of this fuel mixture is burned, it produces 767kJ of heat methane : 890 kJ/mol propane : 2,220 kJ/mol
Determine the phase shift between the 3-phase voltage output : Three single-phase transformers rated at 15kVA, 480V/120V,60Hz are connected in delta to function as autotransformers on a 600V,3-phase line. The H1,H2,X1,X2 polarity marks appear on the metal housing.
Design a ce amplifier with a resistance re in the emitter : When fed from a signal source with a peak amplitude of 0.1v and a source resistance of 20k , the peak amplitude v(pi)is 5mv. specify Re and bias current Ic. The BJT has beta =100. If the total resistance in the collector is 5 k,
Explain solid ammonium chloride and nh4ci reacts : Solid ammonium chloride, NH4CI reacts with solid sodium hydroxide to produce ammonia gas, water and sodium chloride NaCl
What is the present value of amazon growth opportunities : Amazon has a share price of $373.80 and a cost of equity of 10%. If analysts forecast earnings of $1.91 for the current year, what is the present value of Amazon's growth opportunities?
What is the future value of the loan 9 years from now : If he is correct on the future price, did he make a wise investment? What is the future value of the loan 9 years from now?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Why the current is actually going in the opposite direction

if the equation for a mesh current is done and the current comes out negative, with the assumed clockwise direction. does that mean that the current is actually going in the opposite direction

  Line a goes into an inverter then into a nand gate

Simplify the following circuit. Line A goes into an INVERTER, then into a NAND Gate, then into an OR Gate, then travels into another NOR Gate.

  How many p atoms per cm2 have been diffused into si

Phosphorous is an n-type dopant in Si since it introduces extra electrons to Si (an P atom has 1 more valence electron than Si). It is widely used in making semiconductor devices (p-n junctions for example).

  Find equivalent of four resistors are connected in parallel

Four Resistors are connected in parallel. what is the equivalent resistance if their individual resistances are  r1 =100 Ohms ±5% tolerance r2 =470 Ohms ±5% tolerance r3 =330 Ohms ±10% tolerance r4 =1000 Ohms ±5% tolerance

  Write complete ionic and net ionic equations for given eqtns

Write complete ionic and net ionic equations for each of the following molecular equations. a. 2HNO3(aq) + Mg(OH)2(s) ----- > 2H2O(l) + Mg(NO3)2(aq) Nitric acid, HNO3, is a strong electrolyte.

  What is the current in the line feeding the three loads

Two machines and a lighting load are connected in parallel to a 240 V(rms), 60 Hz line. The first machine uses 230 kW of power at 0.85 power factor lagging. The second machine uses 95 kVA at 0.882 power factor leading. The lightening load consumes..

  Calculate the tempco and sensitivity at t

A resistive temperature sensor is modeled as R(T) = 100 +0.0039(T-25)+1.0x10^-5(T-25)^2 where T is in degrees C. Calculate the tempco and sensitivity at T = 50 degrees C.

  Find value of vov nd vgs required to cause device to operate

(a) Find Cox and (b) For an NMOS transistor with W/L = 15 m/0.25 m, calculate the values of VOV , VGS, and VDSmin needed to operate the transistor in the saturation region with a dc current ID= 0.8mA.

  Plot the modulation index necessary to keep the vdc constant

Write the mathlab program to plot the modulation index necessary to keep the Vdc constant at 1200v when the input power factor angle is varied from -60 degrees to 60 degrees.

  What are the positive and negative implications

What are the positive and negative implications of wireless energy?

  Determine the voltage regulation at rated load

A 75-kVA, 230-V/115-V, 60-Hz was tested with these results: Open-circuit test: 115 V, 16.3 A, 750 W; Short-circuit test: 9.5 V, 326 A, 1200 W a) Determine the voltage regulation at rated load, 0.8 power factor lagging.

  Design circuit that allow four switches to control the light

A room has four doors and four light switches (one by each door). Sketch a circuit that allows the four switches to control the light - each switch should be able to turn the light on if it is currently off, and off if it is currently on.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd