Determine the mass of the nitrogen stored in the tank

Assignment Help Mechanical Engineering

Reference no: EM13703921

A fixed mass of nitrogen gas is stored in a cylindrical tank with an internal diameter of .45m and a length of 1.6m. The pressure and temperature of the nitrogen are 2MPa and 75 degrees Celsius. Determine the mass of the nitrogen stored in the tank.

Reference no: EM13703921

Questions Cloud

What is kinetic energy associated with hockey puck flying : What is the kinetic energy (in Btu) associated with a 300 gm hockey puck flying at 120 mph? Assuming an ideal gas, calculate the specific volume in the appropriate units for (6 pts) : a. N 2 at 500 kPa and 900 K b. Neon at 8 kPa and 250 K c. Air at 1..

How many years will take to achieve six-sigma quality : Suppose that your business is operating at four-and-a-half sigma quality level. if projects have an average improvement rate of 50% annually, how many years will take to achieve six-sigma quality?

What is the largest force that the winch can generate : A jeep is stuck in the mud. A rope is tied around a nearby tree in the direction of position vector r1. A maximum force of 1000 lbs. can be generated by the cable winch connected to the front bumper of the jeep. A force of 750 lbs. in the direction o..

Determine the specific volume : A fixed mass of air is at a temperature of 100 degrees Celsius and a pressure of 500 kPa. Determine the specific volume.

Determine the mass of the nitrogen stored in the tank : A fixed mass of nitrogen gas is stored in a cylindrical tank with an internal diameter of .45m and a length of 1.6m. The pressure and temperature of the nitrogen are 2MPa and 75 degrees Celsius. Determine the mass of the nitrogen stored in the tank.

Determine the volume change : Determine the volume change, in ft^3, when 1 lbm of water, initially saturated liquid, is heated to saturated vapor while pressure remains constant at: Sketch a T-v diagram and indicate all relevant state points (eight total points).

Torsion spring to inverted pendulum : If you attach torsion spring to inverted pendulum, is this the equation of motion? The spring is attached on one end to a pivot point and also at the pivot point the spring is attached. I used L/2 for the location of the center of mass.

What is the maximum available friction force : A block weighing 80 N is resting on a plane inclined 20 degree to the horizontal. The coefficient of static friction is 0.5. Determine the friction force on the block. What is the maximum available friction force?

Velocity and acceleration analysis of mechanism : Velocity and Acceleration Analysis of mechanism. The mechanism in Fig. 5.54 has the dimensions: AB=200 mm, AC=600 mm, BD=1000 mm, La=150 mm, and Lb=250 mm. The driver link 1 rotates with a constant angular speed of n=60 rpm. Find the velocities and t..

User Account

All Pages