Determine the isentropic efficiency of the turbine

Assignment Help Mechanical Engineering

Reference no: EM13709062

Steam enters an adiabatic turbine at 6 MPa, 600°C, and 80 m/s, and leaves at 50 kPa, 100°C, and 140 m/s (T0 = 25°C, P0 = 100 kPa). If the power output of the turbine is 5 MW, determine:

a) The mass flow rate of the steam flowing through the turbine,

b) The isentropic efficiency of the turbine,

c) The change in total exergy between the inlet and the outlet of the turbine, and

d) The exergetic efficiency of the turbine.

Reference no: EM13709062

Questions Cloud

Water vapor enters a valve with a mass flow rate : Water vapor enters a valve with a mass flow rate of 1 kg/s at a temperature of 260°C and a pressure of 3.5 MPa, and undergoes a throttling process to 2.75 MPa. (T0 = 25°C, P0 = 100 kPa)

Determine what is the magnitude of the electric field : A capacitor is made from two hollow, coaxial copper cylinders, one inside the other. There is air in the space between the cylinders. What is the magnitude of the electric field at a point between the two cylinders

Write a paper on service level agreements : Feel free to get ideas for a topic from the discussions from last week's discussions. Pick a topic, do the research, use references, be careful about plagiarism, and have fun. Select a specific topic within SLAs, not a general definition.

What new voltage will result in a doubling of stored energy : Find the energy contained in a 2.90 x 10-5 F parallel-plate capacitor if it holds 1.75 x 10-3 C of charge. What new voltage will result in a doubling of the stored energy

Determine the isentropic efficiency of the turbine : Steam enters an adiabatic turbine at 6 MPa, 600°C, and 80 m/s, and leaves at 50 kPa, 100°C, and 140 m/s (T0 = 25°C, P0 = 100 kPa). If the power output of the turbine is 5 MW,

Class stubs and implemenatation for the following program : Need a OOP Unit Tests, Class stubs and Implemenatation for the following program using this SDD. This should be created in ArgoUML using JAVA

Determine the mass flow rate of air through the turbine : An adiabatic gas turbine expands air at 1000 kPa and 500?C to 100 kPa and 150?C. Air enters the turbine through a 0.2-m2 opening with an average velocity of 40 m/s, and exhausts through a 1.09-m2 opening.

Estimate the magnitude of the force acting on the object : A 2.0 kg object has an initial velocity of 10 m/s but comes to rest in five seconds. What is the magnitude of the force acting on the object

Potential energy effects and modeling the air as ideal gas : Refrigerant 134a at a flow rate of 0.5 lb/s enters a heat exchanger in a refrigeration system operating at steady state as saturated liquid at 20 degrees Fahrenheit at a pressure of 20lbf/in^2. A separate air stream passes in counter flow to the refr..

User Account

All Pages