Determine the estimated gain-bandwidth product

Assignment Help Electrical Engineering
Reference no: EM131014889

2300_Find the minimum output voltage.jpg

1. Find A1 ( = Vx/Vdiff). You need the transconductance of QN2 and the output resistances of QP2 arid QN2.

2. Find A2 (= Vo/Vx). You need the transconductance of QP3 and the output resistances Qp3 and QN3.

3. Determine the open-loop gain AVOL in VAI and in dB.

4. Use the Miller effectto estimate the break (-3dB) frequency of the open-loop gain. You will need the voltage gain Aar the value of capacitor Cc, and the output resistances of QP2 and QN2.

5. Determine the estimated gain-bandwidth product.

6. Find the maximum output voltage Vomax. This is the value at which OH enters its triode region of operation.

7. Find the minimum output voltage Vomin. This is the value at which ON5 enters its triode region of operation.

8. Determine the minimum common-mode input voltage VCM min. This is the common-mode input voltage at which QN4 enters triode operation.

9. Determine the maximum common-mode input voltage VCM max. This is the common-mode input voltage at which QN1 or QN2 enters triode operation.

Reference no: EM131014889

Questions Cloud

What investment income should big report : What investment income should Big report for 20X1?$9,000$19,800$17,000$21,000
What is the partial derivative of the given function : The Redlich-Kwong equation provides an approximate model for the behavior of real gases. Find the partial derivative of the function with respect to each variable.
What is the percent value of these cash flows : Huggins Co. has identified an investment project with the following cash flows. If the discount rate is 10 %, what is the percent value of these cash flows? What is the present value at 18 percent? at 24 percent?
Calculate the present value of the series of cash flows : Calculate the present value today of a $4,450 cash flow expected to be received exactly 9 years from today if the required rate of return on this cash flow is 8% per year. Calculate the present value of the following series of cash flows if the appli..
Determine the estimated gain-bandwidth product : Determine the open-loop gain AVOL in VAI and in dB - Determine the estimated gain-bandwidth product - Find the maximum output voltage Vomax. This is the value at which OH enters its triode region of operation.
After-tax cost of debt-outstanding bonds : After-tax Cost of Debt The Heuser Company's currently outstanding bonds have a 9% coupon and a 12% yield to maturity. Heuser believes it could issue new bonds at par that would provide a similar yield to maturity. If its marginal tax rate is 35%, wha..
What is the stocks current value per share : Constant growth valuation Thomas Brothers is expected to pay a $3.1 per share dividend at the end of the year (that is, D1 = $3.1). The dividend is expected to grow at a constant rate of 8% a year. The required rate of return on the stock, rs, is 20%..
Federal district court in the united states : Three seamen who were injured while working for UASC brought suit against it in federal district court in the United States. UASC maintains it enjoys sovereign immunity. The seamen claim it is a commercial enter- prise and not entitled to immunity..
Find the volume v and the approximate error dv in the volume : A rectangular box has a height of 4 feet to within an accuracy of 1 in and a square base with width 2 feet to within an accuracy of 1 in. Find the volume V and the approximate error dV in the volume of the can.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Explain combinational versus sequential circuits

(Combinational versus Sequential Circuits) Which of the fol¬lowing contain circuits that are likely to be combinational and which contain sequential circuits? Explain your rationale.

  Determine the range of the gain k for which system is stable

A single-loop negative feedback system has the loop transfer equation: L(s)=Gc(s)G(s)=K(s+2)^2 / (s(s^2+1)(s+8)) a. Sketch the root locus for 0 K infinity to indicate the significant features of the locus. b. Determine the range of the gain K for whi..

  What is apples approximate die cost

Apple A5 die size is 122mm^2 when fabricated in 45nm technology. Assume they purchase 300mm wafers at a foundry for $ 2.5K /wafer. Assume a yield of 70%. What is Apple's approximate die cost?

  Find what is the bridge output per 1000 lb-in2 of stress

A Whetstone bridge has a strain gage in the lower right leg with a 120 ohm nominal resistance. It is mounted on steel with a Modulus of Elasticity equal to 30x106. The other resistors are equal to 100 ohms. The bridge voltage is 5V.

  Measure different parameters in mechanical systems

What are advantages and disadvantages of using digital circuits in lieu of analog circuits to measure different parameters in mechanical systems

  Find output of the continuous-time unit-step function

The continuous-time counterpart to the N-point discrete-time MA filter is the I-interval continuous-time MA filter given by the input/output relationship y(t)=(1/I)*Integral of x(lamda) delta lambda where the bounds are from t-I

  Determine what is the total antenna noise temperature

An earth station receive antenna has a sky component temperature of20 K, a ground component temperature of 15 K . What is the total antenna noise temperature [K]

  Calculate the minimum required widths of the transistors wn

A CMOS output driver circuit on an IC is connected to an external transmission line. The NMOS and PMOS transistors have gate oxide thickness d = 2.0 nm and channel length L = 0.25 mum. The power rail is VDO = 1.0 V.

  Determine the correlation coefficient for x and y

A random variable X has a variance of 9 and a statistically independent random variable Y has a variance of 25. Their sum is another random variable Z=X+Y. Without assuming that either random variable has a zero mean

  What information can be gathered from a line spectrum plot

Discuss what is meant by line spectra and what information can be gathered from a line spectrum plot.  Discuss the similarities and differences between the Fourier Transform and the Laplace Transform.

  Define frequency divider

Important information about Frequency Divider, Design a frequency divider circuit that will output three pulse frequencies: 25 kHz, 10kHz, and 2.5kHz. Assume that only a 150 kHz CMOS compatible signal is available for the divider input

  What would the final charge arrangement have been

The penny is given acharge of +5nC, and the nickel and dime are discharged. Theassembly is lowered into the can so that the coins hang clear ofall walls, and the lid is secured. The outside of the can is againtouched momentarily to ground.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd