Determine the electrical power that must be supplied to a

Assignment Help Mechanical Engineering
Reference no: EM13625360

A storage tank consists of a cylindrical section that has a length and inner diameter of L=2 m and Di=1 m, respectively and two hemispherical end sections. The tank is constructed from 20-mm-thick glass (Pyrex) and is exposed to ambient air for which the temperature is 300 K and the convection coefficient is 10 W/m^2 *K. The tank is used to store heated oil, which maintains the inner surface at a temperature of 400 K. Determine the electrical power that must be supplied to a heater submerged in the oil if the prescribed conditions are to be maintained. Radiation effects may be neglected, and the Pyrex may be assumed to have a thermal conductivity of 1.4 W/m*K.

Reference no: EM13625360

Questions Cloud

A rigid tank containing 20 kg of refrigerant 134a as : a a rigid tank containing 20 kg of refrigerant 134a as saturated vapor at 1.0 bars and -26.43 c is heated until the
In a special test for determining the performance of a heat : in a special test for determining the performance of a heat exchanger an electric heater produces a temperature
A powered rotating disc roates with a constant 227 rads2 : a powered rotating disc roates with a constant 2.27 rads2 angular acceleration. after 3.98 s it has rotated through an
The mass of each pulley of the system is m and the mass of : the mass of each pulley of the system is m and the mass of the suspended object a is ma. determine the force t
Determine the electrical power that must be supplied to a : a storage tank consists of a cylindrical section that has a length and inner diameter of l2 m and di1 m respectively
Two resistors r1 and r2 are in series with a 78 volts : two resistors r1 and r2 are in series with a 7.8 volts battery. if r1 has a resistance of 2.0 omega and r2 receives
If on striking the ground it embeds itself 700 in into the : an arrow is shot straight up in the air with an initial speed of 210 fts. if on striking the ground it embeds itself
Partition 100 numbers from 0 to 99 according to the : consider the following probability distributiondemand 0 1 2 3 4probability .15 .30 .25 .15 .15partition
Consider a carnot cycle for water in a piston-cylinder : consider a carnot cycle for water in a piston-cylinder device. the mass of the water is 1.5 kg. during the isothermal

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  You may assume there is no change in both potential and

a paddle wheel is inserted in a 0.6 m3 rigid well-insulated tank which is filled with 2 kg of air. the paddle wheel

  A helical spring of stiffness k is cut into two halves and

a helical spring of stiffness k is cut into two halves and a mass m is connected to the twonbsphalves as shown below

  Find the natural frequencies of oscillation

find the natural frequencies of oscillation of the double-pendulum below where m1=m2=m, and L1=L2=L.

  The sales director wants to modernize the design by making

the company you work for makes the casting for the rectangular pan 300 mm long x 200 mm wide x 60 mm deep with a 3 mm

  Its free response amplitude decays such that the amplitude

a mass-spring-damper system has a mass of 100 kg. its free response amplitude decays such that the amplitude of the

  Calculate the rate of water removal from the condenser the

an air conditioner is used to cool and dehumidify air. we will ignore the temperature aspect and model the air

  Calculate the actual a/f ratio and do a wet

Find the stoichiometric A/F ratio (by mass) for the combustion of benzene (C6H6). Compute the actual A/F ratio and do a wet and dry analysis of the products by volume at a mixture strength of 95%.

  You are manufacturing a frame for a vehicle out of some

you are manufacturing a frame for a vehicle out of some aluminum alloy 6061-t451 tubing. the frame is to be welded

  Determine the mass of vapor present at the initial and final

locate the initial and final states on a sketch of the T-v digram. determine the mass of vapor present at the initial and final state, each in kg.

  The strut has a solid circular cross section and is 6 m

a steel strut is pinned at both ends. the strut has a solid circular cross section and is 6 m long. the strut

  Determine the heat transfer and the work in kj kg also

the initial temperature is t 162 c air expands as an ideal gas from 10 bar and the above temperature to 1 bar in an

  What is the tension in the tow cable

the 3000 lb car and the 4600 lb tow truck are stationary. the muddy surface on which the car rest exerts a negligible friction force on the car. what is the tension in the tow cable.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd