Determine the cop ot the cycle and the total cooling load

Assignment Help Mechanical Engineering

Reference no: EM13718027

An ideal vapor-compression refrigeration cycle uses r-134a as the working fluid is used to cool a brine solution to -5 C. This solution is pumped to various buildings for the purpose of air conditioning. The refrigerant evaporates at -10 C with a total mass flow rate of 7.72 kg/s, and condenses at 600 kPa. Determine the COP ot the cycle and the total cooling load.

Reference no: EM13718027

Questions Cloud

Determine the rate of heat rejection to the outside air : Determine the COP of a refrigerator that removes heat from the food compartment at a rate of 5040 kJ/ h for each kW of power it consumes. Also, determine the rate of heat rejection to the outside air.

What is the heat pumps heating coefficient of performance : A heat pump is used to heat a home. It draws 3 kW of electrical power, and it extracts heat at a rate of 6 kW from the cold outdoor air. At what rate does it add heat to the home? What is the heat pump's heating coefficient of performance?

What is the total pressure at the front of the beam : A river (of water) is flowing at a velocity of 1.2 m/s at 25 C. If a large beam is placed in the river to support a bridge, what is the total pressure at the front of the beam (the side facing upstream) in kPa at a depth of 2 m when the atmospheric p..

Hot combustion gases flow into a nozzle at low velocity : Hot combustion gases flow into a nozzle at low velocity with an enthalpy of 1,000 kJ/kg at a mass flow rate of 1 kg/s. At the nozzle exit, the enthalpy is reduced by a factor of 2. What is the thrust experienced by the nozzle as a result of the exhau..

Determine the cop ot the cycle and the total cooling load : An ideal vapor-compression refrigeration cycle uses r-134a as the working fluid is used to cool a brine solution to -5 C. This solution is pumped to various buildings for the purpose of air conditioning. The refrigerant evaporates at -10 C with a tot..

Parting line in injection molding : The parting line in injection molding is which one of the following: (a) the lines formed where polymer melt meets after flowing around a core in the mold, (b) the narrow gate sections where the parts are separated from the runner, (c) where the clam..

Energy transfer by heat into the system : A system consisting of 2 kg of water initially at 160 C, 10 bar undergoes an internally reversible, isothermal expansion during which there is energy transfer by heat into the system of 2700 kj. Determine the final pressure, in bar, and the work, in ..

Final temperature and pressure of the fluid in the tank : A rigid tank contains 5 kg of saturated liquid-vapor mixture of H2O at 100 kPa and quality of 24.4%. A heat transfer process occurs until the H20 in the tank is a saturated vapor.

The specific exergy destruction : An air compressor compresses air from 1 bar and 300 K to 5 bar and 540 K. The velocity at the inlet is 70 m/s and the velocity at the exit is 150 m/s. If To = 300 K and Po = 1bar.

User Account

All Pages