### Determine the buoyant force that acts on the balloon when

Assignment Help Mechanical Engineering
##### Reference no: EM13629064

A diver is in inside of a coffin full of gold in the seabed. The coffin has a mass of 510kg and a volume of 0.26m3, so its density is 1961 kg/m3. The diver has a rubber balloon which is neutrally bouyant when it is empty and he wants to use it to take the coffin to the sea surface. The diver will fill the balloon at a depth of 50m.

a) Determine the minimum volume of air that the diver should add to the balloon so the coffin can start to float and move to the surface. Air weight in the balloon can be ignored.

b) What happens when the balloon start going up to the surface, taking into account that the balloon's walls are flexible?

c) Determine the buoyant force that acts on the balloon when it has go up to a depth of 10m (40meters from the seabed). Hint: Can assume that the air temperature doesn't change as it goes to the surface.

### Write a Review

#### A 005 m3 quartz tube is filled with proper proportions of

a .005 m3 quartz tube is filled with proper proportions of liquid water and water vapor at 100 kpa. it is then sealed

#### Explain the velocity of the ball when it reaches the highest

A ball with a mass of 0.25 kg is thrown vertically upward with an initial velocity of 10 m/s. What is the velocity of the ball when it reaches the highest point?

#### Assume this can be done in a reversible process by the use

a counterflowing heat exchanger cools air at 600 k 400 kpa to 320 k using a supply of water at 20degc 200 kpa. the

#### You are manufacturing a frame for a vehicle out of some

you are manufacturing a frame for a vehicle out of some aluminum alloy 6061-t451 tubing. the frame is to be welded

#### Determine the minimum mass in kg of a 24 in long tension

determine the minimum mass in kg of a 24 in long tension member that must support a load of 1000 lbs manufactured from

#### Knowing that th height of the rebound is 6m determine a the

a 75-g ball is projected from a height of 1.6m with a horizontal velocity of 2ms and bounces from a 400g smooth plate

#### Twater vapor temperature in c determine a the final

water vapor an ideal gas enters a diffuser expansion device at a pressyre of 0.70 bar a termperature of 160 c and a

#### If the critical resolved shear stress is 62 mpa 900 psi

consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of

#### The temperature inside is measured to be 350degf determine

a 10 ft3 vessel contains steam at 200 psi and 500degf. a valve on top of the vessel is opened and steam is expelled to

#### Determine be naturak frequency of the system

A 0,5Kg mass attached linear spring suffress 01 N/m. Determine be naturak frequency of the system in hortz e reapert this calculation for a mass of 50Kg and a suffress of 10N/m and compare your result to that of part.

#### After drawing a neat and clear schematic of the geometry

a 5 ft3 tank containing steam at 14.7 psia 1 quality is fitted with a relief valve. heat is transferred to the tank

#### At 45 degrees celsius latitude the gravitational

at 45 degrees celsius latitude the gravitational acceleration as a function of elevation z above seas level is given by