Determine the average current by the method of averaging

Assignment Help Electrical Engineering
Reference no: EM13286419

A 200 hp, 230 V, 500 rpm separately excited dc motor is controlled by a chopper. The chopper is connected to a bridge-diode rectifier supplied from a 230 V, 3 phase, 60 Hz ac main.

The motor chopper details are as follows:
Ra= .04 O, La=.0015 H, Kb=4.172 V/rad/sec, fc= 2kHz

The motor is running at 300 rpm with 55 % duty cycle in the chopper. Determine the average current by the method of averaging and the electromagnetic torque produced in the motor.

Reference no: EM13286419

Questions Cloud

Find the force due to radiation pressure : The mirrors used in a particular type of laser are 99.99% reflecting. What is the force due to radiation pressure on one of the mirrors
Calculating annuities are planning to save for retirement : How much can you withdraw each month from your account assuming a 25-year withdrawal period?
Find the resistance and the inductance of the coil : The current in a solenoid is 5amps when it is connected to a 24v battery and 1.2amps when it is connected to a 24v, 60 Hz alternating current power source. Find the resistance and the inductance of the coil.
What is the initial requirement : In the previous problem, suppose you sell the stock at a price of $42. what is your return? what would your return have been had you purchased the stock without margin? what if the stock price is $34 when you sell the stock?
Determine the average current by the method of averaging : A 200 hp, 230 V, 500 rpm separately excited dc motor is controlled by a chopper. The chopper is connected to a bridge-diode rectifier supplied from a 230 V, 3 phase, 60 Hz ac main. The motor chopper details are as follows:
Find the radiation pressure at the surface of the sun : The intensity of sunlight striking Earth's upper atmosphere (called the solar constant) is 1.35 kW/m2. Find the radiation pressure at the surface of the sun
What is the expected return on the mutual fund : What is the standard deviation of returns for the mutual fund? Is it higher or lower than the standard deviation found in part 2? Why?
Find variation in duty cycle required to speed variation : The motor details are as follows: 1 hp, 10V, 2500 rpm, 78.5 % efficiency, Ra=.01 O, La=.002 H, Kb= .03819 V/rad/sec. The chopper is one quadrant, and the on-state voltage drop across the device is assumed to be 1V regardless of the current variati..
Explain the ph of a solution resulting from the dissolution : What is the pH of a solution resulting from the dissolution of 2.09 g of NH4Br in water to form 0.371 L of solution

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the maximum and minimum values of response

Determine the maximum and minimum values of the magnitude response. How many peaks occur in the magnitude response in the frequencyrange from zero to 2π What are the locations of the peak and dips

  Calculate the input snr and the output snr of repeater

A repeater with additive noise of 48μW and a power gain of 20 dB has 150μW of input signal power and 1.2μW of input noise. Calculate the input SNR, the output SNR, the noise factor, and the noise figure.

  Calculate on the axis of a charged ring

(a) Calculate on the axis of a charged ring. The ring lies in the z = 0 plane, has radius a, and carries uniform charge density λ C/m. (b) Repeat for a charged disk. The disk lies in the z = 0 plane, has radius a, and carries uniform charge density ..

  Find the induced emf if the speed changes to 2000 rpm

A separately excited dc generator produces 400 v at 1500 rpm under open circuit conditions. Find the induced emf if the speed changes to 2000 rpm. Assume the flux is constant.

  What minimum resistance value can the rheostat be set

A 120 V lamp-dimming circuit is controlled by a rheostat and protect from excessive current by a 2 A fuse. To what minimum resistance value can the rheostat be set without blowing the fuse

  Determine the snr needed for bpsk from the error rate curves

Suppose the FCC allocates 300 kHz channels for a high quality video conference service. A service provider decides that this service requires 720 kbps (not including overhead and error control) for each channel.

  What is the rms value of this voltage waveform

a certain ideal voltage generator is characterized as v(t) = 40 sin 377 t . If this generator is measured with a DC voltmeter, the instrument reads 12 volts, what is the rms value of this voltage waveform

  Determine the frequency and the period of function

Let x(t) = cos(3/4(t+1/2)+1/4) a. Determine the frequency, the period of x(t) b. Given another signal, y(t)= sin(3/4(t+1)+3/8), is y(t) identical to x(t) Why

  Find current that flows in silicon bar of 10micrometerlength

find the current that flows in a silicon bar of 10 micrometerlength having a 5 X4 micrometer cross section and having freeelectron & hole densities of 10^5/cm^3 & 10^15/cm^3 ,respectively, when a 1V is applied end-to-end. Use Mn =1200cm^2/VS; Mp=5..

  What is the resistance of resistor 3 with battery voltage

The battery voltage is 20V Resistor3 a resistance of 20ohms. Resistor1 has a resistance of 30. Current flow is 250mA through the circuit. What is the resistance of resistor 3

  Find the new bit error rate in the presence of the jammer

It is decided to apply a Fast Hopping (FH) scheme on the above ASK system. The hopping is made over 12 channels of 100 kHz; or over 1.2 MHz bandwidth. The ASK signal hops 6 bands per bit period. Now a strong jammer randomly jams one of the 12 FH c..

  Find the position of vectors r1 and r2 for p and q

Consider points P(2,4,3) and Q(1,-5,2) in three dimensional space: Find the position of vectors r1 and r2 for P and Q in terms of unit vectors i,j,k Determine graphically and analytically the resultant of these position vectors Hint: resultant vector..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd