Determine relative humidity-humidity ratio and the enthalpy

Assignment Help Mechanical Engineering

Reference no: EM13702473

Atmospheric air at a pressure of 1 atm and dry-bulb temperature of 90F has a wet bulb temp of 85F. Using the psychometric chart, determine (a) the relative humidity, (b) the humidity ratio, (c) the enthalpy, (d) the dew point temp and (e) the water vapor pressure

Reference no: EM13702473

Questions Cloud

An excel spreadsheet with componets names : Physical Networking. We are having to put together an excel spreadsheet with componets names, descriptions, costs, total project costs. We must create a Description of a basement telecommunication and network server space, network equipment tha..

Research the exxon valdez accident : Research the Exxon Valdez accident of 1990 on the internet and answer the following: What were the causes? What regulations were passed as a result?

What is the power requirement of the compressor : Methane gas is compressed at the rate of 3x104 m3/hr (as measured at 0.1013 MPa and 15C) from 0.69 MPa and 26.7C to 3.45 MPa. The compressor operates adiabatically and has an efficiency of 80%. After compression, the methane is colled at a constant p..

Unix uses many commands in its operating system : Question 1: UNIX uses many commands in its operating system. Research on the web at least 2 more commands describe their function and discuss similar commands in Windows operating system.

Determine relative humidity-humidity ratio and the enthalpy : Atmospheric air at a pressure of 1 atm and dry-bulb temperature of 90F has a wet bulb temp of 85F. Using the psychometric chart, determine (a) the relative humidity, (b) the humidity ratio, (c) the enthalpy, (d) the dew point temp and (e) the water v..

Refraction of a light beam at the interface of two media : The following is a diagram shows refraction of a light beam at the interface of two media. The incidence and refraction angles are measured to be 45 deg and 30 deg respectively. Will total reflection happen when the light beam shins from the top to t..

Calculate electric power input to oven per unit oven width : The electric reheating oven is used to heat a continuous sheet of metal from 25-1000C The metal speed is such that the strip of metal spends 2 hours inside this oven, The sheet thickness is 1cm and the ambient temperature is 25C with the temperature ..

District heating system should supply hot water : If the district heating system should supply hot water at 900C, what is the lowest possible condenser pressure with water as the working sub-stance?

The end of the bar will be in contact with the frame : A 250mm long brass bar (CTE = 20.5X10-6 / 0 C) is being supported as shown below. Initially, when the temperature is 15 deg C, there is a total clearance of 0.25mm between the right end (left end is secured to the left side support) of the bar and th..

User Account

All Pages