Determine a the local atmospheric pressure and b the

Assignment Help Mechanical Engineering
Reference no: EM13605513

In water at a depth of 7 m, the absolute pressure is read to be 164 kPa. Determine, (a) the local atmospheric pressure, and (b) the absolute pressure at a depth 7 m in a liquid whose specific gravity is 0.93 at the same location.

Reference no: EM13605513

Questions Cloud

Determine a the displacement of the balloon from the : at any instant the horizontal position of a weather balloon is defined by x30t ft where t is given in seconds. if the
Te local acceleration of gravity is 981 ms2 determine the : a gas is contained in a vertical frictionless pixton-cylinder. the piston m 10 kg a- 7.5 x 10-3 m2 is attached to a
The speed is then held constant for 198 s after which there : an automobile accelerates from rest at 2.2 ms2 for 24.6 s. the speed is then held constant for 19.8 s after which there
It does this with air entering at 70 ms 500 c and 3 atm and : an air turbine is a continuous flow device that produces shaft power by expanding high pressure air. a particular air
Determine a the local atmospheric pressure and b the : in water at a depth of 7 m the absolute pressure is read to be 164 kpa. determine a the local atmospheric pressure and
First show all forces and reaction at the instant of : skydiver jumps from airplane they will accelerate rapidly at first but air resistance prevents them from falling faster
Determine the maximum weight of block c if block b is not : a 10-lb block b rests as shown on a 20-lb bracket a. the coefficients of friction are us0.3 and uk0.25 between block b
The outer diameter of this tube is 60 mm determine a the : a tube with elastic modulus of 75 gpa is used to support a compressive load. it is required that this tube must not
If the plane starts to level off at t 40 s determine at : the flight path of a jet aircraft as it takes off is defined by the parametric equations x 1.25 t2 and y 0.03 t3

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine biot number in order to support lumped formulation

Determine the Biot number in order to support the lumped formulation. Solve the differential equation to find an expression for temperature as a function of time.

  Determine the radius of curvature of the path of the package

package is dropped from the plane which is flying with a constant horizontal velocity of vA = 150 ft/s at a height h = 1500 ft. Determine the radius of curvature of the path of the package just after it is released from plane at A.

  A particle which moves with curvilinear motion has

a particle which moves with curvilinear motion has coordinates in meters which vary with time t in seconds according to

  Find the stagnation pressure loss

Consider a supersonic wind tunnel with test section Mach number of 2 and fixed geometry diffuser designed to operate with minimum stagnation pressure losses (smallest diffuser area).

  Determine the magnitude of the resultant force acting at a

The roof is supported by cables. If the cables exert FAB = 100N and FAC = 120N on the wall hook at A, determine the magnitude of the resultant force acting at A.

  2 kg of water is contained in the vertical frictionless

2 kg of water is contained in the vertical frictionless piston cylinde device.the mass of the piston is such that the

  Find the power being transmitted

As the hollow steel (G = 77 GPa) shaft shown rotates at 180 rpm, a stroboscopic measurement indicates that the angle of twist of the shaft is 3°. Determine

  Heat tansfer please find attached some work i need help

please find attached some work i need help with. i have also attached the appendix which the work says is required to

  A 300kg compressor is placed at the end of a cantilever

a 300kg compressor is placed at the end of a cantilever beam of length 1.8 m made of a material with an elastic modulus

  Calculate the diffusion co-efficient

The diffusion constant (Do) and activation energy (Q) of C in BCC Fe is 0.01 cm2/sec and 80kJ/mol respectively. In FCC Fe, the values are 0.21 cm2/sec and 148kJ/mol. At exactly 910oC these two phases can co-exist.

  The ball at is kicked such that 60 if it strikes the

the ball at is kicked such that 60 . if it strikes the ground at having coordinates 25 -25 determine the speed at

  What are the percentages of the total heat absorption

What are the percentages of the total heat absorption taking place in the economizer, boiler drum and the superheater, respectively? Assume cp of air and water as 1.005 kJ/kg K and 4.2 kJ/kg K, respectively.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd