Determine a the change in specific entropy of the water b

Assignment Help Mechanical Engineering
Reference no: EM13621254

Water enters a condenser at a pressure of 200 kPa and a quality of 0.95. The pressure drops by 25 kPa across the condenser as heat is extracted to a 30%u2070C thermal reservoir. If the water exits as a saturate liquid, determine a) the change in specific entropy of the water, b) the change in specific entropy of the reservoir, and c) the entropy production per unit mass of the entire process.

Reference no: EM13621254

Questions Cloud

An investor is considering a project that will generate : an investor is considering a project that will generate 800000 per year for four years. in addition to upfront costs at
Determine the ratio of the work delivered by the turbine to : consider a steam power plant that operates between the pressure limits of 10 mpa and 20 kpa. steam enters the pump as
Poject lmk requires an initial outlay of 400000 and has a : 1 dyi construction co. is considering a new inventory system that will cost 750000. the system is expected to generate
Calculate the total work done by friction and air : a ski trail makes a vertical descent of 78.0 m as shown in the figure below . a novice skier unable to control his
Determine a the change in specific entropy of the water b : water enters a condenser at a pressure of 200 kpa and a quality of 0.95. the pressure drops by 25 kpa across the
Adventure outfitter corp can sell common stock for 27 per : 1 adventure outfitter corp. can sell common stock for 27 per share and its investors require a 17 return. however the
The characteristic direction of the first is at angle : a beam of polarized light strikes two polarizing sheets. the characteristic directions of the second is 900 with
A rigid tank contains an ideal gas at 40u2070c that is : a rigid tank contains an ideal gas at 40u2070c that is being stirred by a paddle wheel. the paddle wheel does 200 kj of
A 075-mw laser emits a narrow beam of light that enters the : a 0.75-mw laser emits a narrow beam of light that enters the eye as shown in the figure.a how much energy is absorbed

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  It is known that the normal stress is 68 mpa and the shear

the rotor shaft of a helicopter drivesd the rotor blades that provide the lifting force and is subjected to a

  Find out the largest couple that can be applied

Determining the largest couple that can be applied to a beam in pure bending. A beam of cross section shown is extruded from an aluminum alloy for which σy = 310 MPa and σu = 480 MPa.

  Determine the reduction in the exit temperature of the

the compression stages in the axial compressor of the industrial gas turbine are close coupled making intercooling very

  A light globe dissipates 200w as heat it is exposed to a

a light globe dissipates 200w as heat. it is exposed to a light breeze of air at 20c which results in a convective heat

  Machining costs per casting are 600 for the brass-copper

in the design of an automobile radiator an engineer has a choice of using either a brass-copper alloy casting or a

  A glass or epoxy laminate with a fiber orientation

A glass/epoxy laminate with a fiber orientation of 30 degrees is subjected to a shear stress t_xy (or tau_xy) which can be positive or negative.

  Determine the work produce

Refrigerant 134a at 700 kPa and 40oC is expanded adiabatically in a closed system to 60 kPa. Determine the work produced, in kJ/kg, and final enthalpy for an isentropic expansion efficiency of 80.

  The sun warms the can and contents to a final tmperature of

a can of juice consists of .06 kg of aluminum and .355 liters of liquid. consider the contents to be saturated liquid

  A projectile is launched with a speed v0 270 ms from the

a projectile is launched with a speed v0 27.0 ms from the floor of a 4.3-m-high tunnel as shown. determine the maximum

  The body starts from the position sx0i with initial speed

the acceleration of a particle moving along a straight line is inversely proportional to its speed with the constant of

  Cconstant specific heats for air at room temperature

a turbojet aircraft is flying with a velocity of 320 ms at an altitude of 9150 m where the ambient conditions are 32

  Briefly explain why porosity decreases the thermal

briefly explain why porosity decreases the thermal conductivity of ceramic and polymeric materials rendering them more

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd