Design the electrical system for a shopping center

Assignment Help Electrical Engineering
Reference no: EM13248014

Design the electrical system for a shopping center with 500,000 square feet at least 30 spaces of three different sizes (5,000, 10,000 and 25,000 sf). They may be offices, banks, restaurants and shops. They must design the electrical distribution system and interior lighting for each of the three types (including fixtures, receptacles, branch sizes and feeders, substations, protection, and grounding systems, short circuit study, and voltage drop ).
To the mall should design the electrical distribution system (including power supplies for system sizes of central A / C water heaters and other equipment areas, size and feeder substation, protection, and grounding systems; study short circuit, and drop in voltage). Use the most appropriate voltages in each case.
Draw diagrams monoline and plants with all notes, details and schedules as it deems necessary panels. Provide evidence of your computations short circuit and voltage drop for each case.

Reference no: EM13248014

Questions Cloud

Design a circuit using only one op amp : A circuits is needed to realize the transfer function  \(T_{v}(s)=\pm \frac{(s+125)(s+500)}{(s+250)(s+1000)}\)  (a) Design a circuit using two OP AMPs (b) Design a circuit using only one OP AMP.
What is net working capital : What are the two main goals of effective management of working capital? What do you think are your company's two main goals of its working capital?
How to determine the overall gain of a cascaded system : How do we determine the overall gain of a cascaded system of AV1, AV2, and AV3 in dB, in absolute What do we do if all the gains are given in dB, absolute and dB
How do we objectively evaluate subjective skills : How do we remain objective in evaluating employee performance? How do we objectively evaluate subjective skills such as communication and performance?
Design the electrical system for a shopping center : Design the electrical system for a shopping center with 500,000 square feet at least 30 spaces of three different sizes (5,000, 10,000 and 25,000 sf). They may be offices, banks, restaurants and shops.
Find the total electric field of the ring : A ring of charge is centered at the origin in the vertical direction, Find the total electric field, E, of the ring at the point P = (2.25 m, 0.00 m)
Find the maximum magnitudes of electric forces : A stationary particle of charge q = 2.6 × 10-8 C is placed in a laser beam whose intensity is 2.3 × 103 W/m2, find the maximum magnitudes of electric forces
Explain whats the new pressure in psi : Tires in a bike have been filled to a pressure of 53.0 psi at 19.0 deg C. after riding around for a while, the volume of the tire increased by 2% & the temp was now 32 deg C. whats the new pressure in psi
Write an abel program for a combinational logic function : Write an ABEL program for a combinational logic function with five input bits N4-N0 representing an integer between 0 and 31 and two outputs M3 and M5 to indicate if the number is a multiple of 3 or 5, respectively.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Presuming that ideal filters are available

Assuming that ideal filters are available, what is the lowest frequency at which the signal can be sampled and subsequently recovered in its analog form without distortion using a low pass filter?

  Calculate the fermi level on each side of the junction

An abrupt silicon pn junction at zero bias has dopant concentrations of Na = 1017/cm3 and Nd = 5 x 1015 cm-3 at T = 300K. (a) Calculate the Fermi level on each side of the junction with respect to the intrinsic Fermi level.

  Define the river estuary is tidal causing the surface

The river estuary is tidal causing the surface level of the water to rise and fall. At certain times of day, reflections from the water surface cause deep fading of the received signal.

  What are measured values for the two resistances

What do you believe would happen, if you removed the 220 ohm resistor from the circuit and connected the LED directly to the 555 integrated circuit. Are there any appreciable differences between labeled, calculated.

  Calculate the natural frequency of oscillation

The bellows, diaphragm, and Bourdon tube pressure sensors all exhibit second order time response. This means that a sudden change in pressure will cause an oscillation in the displacement and, therefore in the sensor output.

  Where should substation be located to minimize the losses

Three towns A, B & C are situated at the corners of an equivalent triangle of side 30 km. It is proposed to supply power to extent of 30 MW, 10 MW, 20 MW to A, B & C respectively from one substation. Where should substation be located to minimize ..

  Find unit vector in direction of a in spherical coordinates

Two points are given in Cartesian coordinates as P1 (0,0,1) and P2 (2,1,,3). vector A connects p1 (tail) to p2 [head). Find the unit vector in the direction of A in spherical and cylindrical coordinates.

  Use the bounce diagram to plot

The line is terminated in a load RL = 25 ohm. Use the bounce diagram to plot V(t) at a point midway along the length of the line from t = 0 to t = 25 ns.

  When the radiator area a is a minimum for temperature ratio

A heat engine operating in outer space may be assumed equivalent to a Carnot engine operating between reservoirs at temperatures TH and Tc The only way heat can be discarded from the engine is by radiation

  What is the most common used op-amp in the industry

1) What are some practical op-amp applications Can you give example and explain why the bop-amp was used in your example 2) What is the most common used op-amp in the industry

  Would it be preferable to put filter before noise amplifer

A filter with a great deal of attenuation must be placed in an amplifier chain. Ignoring all considerations other than the desire to minimize noise figure, would it be preferable to put the filter before or after a low noise amplifier Why

  Will the breaker likely be tripped

Calculate current flow and describe its probable path. Will the breaker likely be tripped? Is there a risk of electrocution? If so what factors contribute to the risk?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd