Design the circuit and select the appropriate components

Assignment Help Electrical Engineering
Reference no: EM131099548

It is desired to design a power electronic system, referred to as ‘the device' in below, which has the following specifications:

- The device is supplied from a single-phase wall outlet which has a 240 V rms, 50 Hz specification (through terminals I1, I2).

- The device can generate a fixed ±5 V dc (through terminals O1, O2, O3).

- The device can also produce a variable 0 to 20 V dc (through terminals O4, O5).

- The device can also produce two fixed 60 V 50 Hz ac outputs, that can even be connected in series to produce a fixed 120 V ac (through terminals O6, O7, O8).

- The device can also produce a variable 0-60 V, 50 Hz or 60 Hz ac output (through terminals O9, O10). There will be a up/down button on the device to select either 50 or 60 Hz.

- The device will only have one of its outputs functioning at a time (i.e., it will not be loaded through multiple outputs simultaneously).

- The device should be able to supply a load (a variable resistor with a minimum resistance of 10 ohms), when connected to either of its output terminals.

Your Task:

1- Design the circuit and select the appropriate components for that circuit to fulfill the requirements of the device.

2- Verify your design by MATLAB simulations. (Note that different sections of the design can be simulated separately to make the simulation faster.)

Comments/Deadline : Design the circuit and select the appropriate components for that circuit to fulfill the requirements of the device. 2- Verify your design by MATLAB simulations.

Note: Before Start work please send your confirmation if doable and We will request you is to provide step by step solutions for customers/student in order to them to understand how the solution going gradually. Reply ASAP.

Reference no: EM131099548

Questions Cloud

Describe a circumstance when the median : The median is a useful measure, but it can be misleading. Describe a circumstance when the median is very useful as the average and a circumstance when the median is very misleading as the average.
Will society face welfare loss in monopolistic market : Compare the competitive price charged and quantity produced under perfect competition and monopoly. Other than identifying the presence of only one producer under monopoly, why do we tend to see this differential? Does a monopolist achieve efficiency..
Is the vesicaurinaria superior or inferior to the prostate : Identify two features (vessels, glands, cavities, etc.) which are not included in the Virtual Model. Describe their respective functions. Is the vesicaurinaria superior or inferior to the prostate? In what two organ systems does the penis function?
No-par common stock with a stated value : DeLong Corporation was organized on January 1, 2017. It is authorized to issue 10,000 shares of 8%, $100 par value preferred stock, and 500,000 shares of no-par common stock with a stated value of $2 per share. The following stock transactions wer..
Design the circuit and select the appropriate components : Design the circuit and select the appropriate components for that circuit to fulfill the requirements of the device. Verify your design by MATLAB simulations
Expected value of a pull on the slots : What does 95% payback mean in terms of the expected value of a play on the slot machines? i.e. What is the expected value of a pull on the slots?
Briefly summarize the major point you found most interesting : Major points of the movie - briefly (2-3 paragraphs) summarize the major points you found most interesting or intriguing in the movie.
Simple random sampling : Conduct the following test at the alpha α equals=0.050 level of significance by determining (a) the null and alternative hypotheses,(b) the test statistic, and (c) the P-value. Assume that the samples were obtained independently using simple rando..
Question regarding the true population proportion : What size sample would be necessary to find, with 95% confidence, the true population proportion to within 3.5% if you had no idea what the true proportion was? This question stands alone and does not refer to any other question.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Use the relationship between gain and hpbw.

Suppose you go to a consultation meeting with a potential client.The client requires a single beam antenna with HPBW's of theta1 = 15 degrees in one plane and theta2 = 30 degrees in the other plane. During the meeting, the potential client men..

  Discuss some of the advantages of plcs over relay logic

discuss some of the advantages of plcs over relay logic circuits. how do we decide to use either a plc or a relay

  What are the transfer function

What are the transfer function and the impulse response of the system?

  What is the relative permittivity of the dielectric material

Two rectangular waveguides, one air filled with internal dimensions 2cm x 1cm and the other dielectric filled with internal dimensions 1cm x 0.5cm, have the same cut-off frequency for the dominant mode. what is The relative permittivity of the die..

  Determine all prime implicants and essential prime implicant

For the equation F(a,b,c,d) = ab'c' + abc'd + abcd + a'bcd + a'bcd', determine all prime implicants and all essential prime implicants: (a) using a K-map, (b) using the tabular method.

  Calculate the added inductance that leads to a conduction

Assume that an additional inductance can be inserted in series with the load. also assume that the converter has no freewheeling diodes. Calculate the added inductance that leads to a conduction period of 180 degrees when alpha = 30 degrees.

  Calculate the electric field strength at a location a

A certain antenna installation using a transmitting frequency of 1250 kHz uses an insulated vertical tower of height 200 feet. For a 25 kW transmitter power, calculate the electric field strength at a location A at a distance of 25 km.

  Average acceleration of the cart

When the clock reads 9.0 seconds, the cart's velocity in the positive x direction is 3.0 m/s. What is the magnitude (in m/s2) of the average acceleration of the cart?

  Compute the first five samples of the response to the input

For the system specified by the following difference equation, compute the first five samples of the response to the input given as x(n)=e^-0.4n u(n-1). The system is initially at rest.  y(n)=y(n-1)-2y(n-2)+x(n)-0.8x(n-1)

  Design metallurgical channel thickness of n-channel jfet

Design (determine) the metallurgical channel thickness of an n-channel silicon JFET such that the pinch off voltage is -3.0V. The doping parameters are NA=3x1018cm-3 and Nd=2x101616 cm-3.

  Find the maximum speed for a circular disk

A circular disk having a radius of 4 ft and weighing 40lb has a small weight of 20lb attached to it at a distance of 2ft from its center. If the disk is in the vertical plane and set in rotation about an axis through

  How many turns are there on the 480 v and 120 v windings

The nameplate on a 50 kVA transformer shows a primary voltage of 480 V and a secondary voltage of 120 V. We wish to determine the approximate number of turns on the primary and secondary windings.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd