Design a system that has no moving mechanical parts

Assignment Help Physics

Reference no: EM131346981

1. Design a system that has no moving mechanical parts to cool machine shop compressed air at 0.500 MPa, 25.0°C to 0.00°C at 0.101 MPa. The outlet velocity must be at least 10.0 m/s. If possible, fabricate and test your design.

2. Design a small demonstration wind tunnel to be driven from a standard compressed air supply line at 100. psia and 70.0°F. Assume that the maximum volumetric air flow rate available from this supply is 10.0 ft³ /min at 14.7 psia and 70.0^o F. The wind tunnel test section must be at least 1.00 inch in diameter and must reach a Mach number of at least 2.25.

The air may be exhausted to the atmosphere, but it first must be decelerated to subsonic velocity to minimize noise generation. If possible, fabricate and test your design.

Reference no: EM131346981

Questions Cloud

Analyze hsbc internal organizational culture factors : Analyze HSBC Internal organizational culture factors lead to the failures immoral money laundering conduct - 10 academic reference

Determine thrust produced by the nozzle in atmospheric air : A sonic converging nozzle with a negligible inlet velocity and inlet and throat areas of 2.00 in2 and 0.500 in2 , respectively,- Determine the thrust produced by the nozzle in atmospheric air.

Bank with one-year maturity and fixed interest rate : Your grandmother asks for your help in choosing a certificate of deposit? (CD) from a bank with a? one-year maturity and a fixed interest rate. The first certificate of? deposit, CD? #1, pays3.45 percent APR compounded weeklyweekly?, while the second..

Design an attitude control nozzle for a spacecraft : Design an attitude control nozzle for a spacecraft that produces 50.0 N of thrust using compressed helium gas stored at 50.0 MPa and 0.00°C.

Design a system that has no moving mechanical parts : Design a system that has no moving mechanical parts to cool machine shop compressed air at 0.500 MPa, 25.0°C to 0.00°C at 0.101 MPa.

Design an economic policy solution to the problem : Design an economic policy solution to the problem. Analyze the economic theory used to complete the policy solution and determine the impact on the appropriate stakeholders.

Plot the nozzle diameter vs length along the nozzle : Plot the nozzle diameter vs. length along the nozzle, keeping the angle of the diverging wall to less than 10o with the horizontal to prevent flow separation.

Analyze the pure nash equilibrium and mixed nash equilibrium : Analyze the pure Nash equilibrium and mixed Nash equilibrium strategies in the following manufacturer-distributor coordination game. How would you recommend restructuring the game to secure higher expected profit for the manufacturer?

Currently has outstanding bond that pays interest annually : (After-tax cost of debt) Fitbite,Inc. currently has an outstanding bond that pays interest annually, a coupon rate of 6% and 5 years until Maturity. If is is in the 35 % marginal tax rate, what is its After-tax cost of debt? What is the After-tax cos..

User Account

All Pages