Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
a. design a half-subtractor circuit with inputs x and y and outputsDiff and B out. the circuit subracts the bits x - y and places thedifference in Diff and the borrow in B out.
b. design a full- subtractor circuit with three inputs x,y,B in andtwo outputs Diff and B out. the circuit subtracts x-y-B in , whereBin is the input borrow, B out is the output borrow, and Diff isthe difference
What is the principle behind CRT(CATHODE RAY OSCILLOSCOPE), and How this method is simplified in LCD and LED. Is the same CRT principle used in LCD and LED Televisions. If no what is the principle used in LCD and LED Tvs.
Design a circuit that has 4 inputs, WXYZ, and two outputs, f and g, where W is the most and Z is the least significant bit. The output f is asserted whenever the two-bit number WX is greater than the two-bit number YZ.
A 100 W bulb takes 0.833A and a 200 W bulb takes 1.67 A from a 120V source. If the two bulb were connected across a 240 V source, what current in amperes will flow through the bulbs?
A stack controller is a digital circuit in a computer that implements last in firstout (LIFO) storage for temporary data. It operates analogously to a stack of plates where you can put a new plate on the top of the stack or you can take a plate of..
A plane electromagnetic wave of frequency 300 MHz propagates in homogeneous sea water (ε=80,σ=1) along the z-axis. The effective field strength at the excitation point(point of origin) is 0.1V/m.
Evaluate the size of the solar PV system and Sizing a Solar PV System - What is their monthly average energy use?
An embedded system with a 8 bit analog to digital converter is connected to a transducer with an output voltage of 20 millivolts. This signal is then amplified by an amplifier with a gain of 50. Assume that this signal level is appropriate for the..
BJT can be used as a switching network. In this case, Q-Point jumps from one extreme of Dc Load Line to the other creating Saturation and cutoff conditions. What components in the configuration assure us of this operation
the arrival rat of cars at a toll plaza is 50 cars per hours. There are three boothes serving an a verage of 20 cars per hour. Assume an exponential for service time and a poisson distribution for arrival time.
The ABCD constants of a three-phase, 345-kV transmission line are A = D = 0:98182 + j0:0012447. The line delivers 400 MVA at 0.8 lagging power factor at 345 kV. Determine the sending end quantities, voltage regulation, and transmission efficiency.
Each pole of a 100kW, 250v flet-compound generator has a shunt field of 2000 turns and a series field of 7 turns. If the total shunt field resistance is 100 ohms, calculate mmf when the machine operates at rated voltage.
An AAC is composed of 37 strands, each having a diameter of 0.333cm. Calculate the DC resistance in ohms per km at 75oC. Assume that the increase in resistance due to spiralling is 2%.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd