Describe the part of the electron while in magnetic field

Assignment Help Physics
Reference no: EM13544683

A electron enters a magnetic field of 0.3 T at an angle of 45 degrees and with a speed of 5 E5 m/s. Find the force on the electron . Describe the part of the electron while in the magnetic field.

Reference no: EM13544683

Questions Cloud

Find total charge on plates and voltage across all capacitor : Find the equivalent capacitance of a 4 uF , 6uF and 8uF capacitor connected in parallel that has a 12 volt battery connected in series with the parallel capacitors. Also, find the total charge on the plates and the voltage across each capacitor.
What is the resistance of the coil in the motor : A vacuum cleaner is connected to a 120V socket and uses 3.0 A when the back emf generated by the electric motor is 72 volts. What is the resistance of the coil in the motor?
What is the cars speed after the loading is completed : An open train car, with a mass of 2130 kg, coasts along a horizontal track at the speed 2.41 m/s. The car passes under a loading chute and, as it does so, gravel falls vertically into it for 2.59 s at the rate of 489 kg/s. What is the car\'s speed af..
Compare this performance with heat transfer of solid silver : A pipe 0.0178 m in diameter and 0.16 m long can transfer 3726 J of heat per second with a temperature difference across the ends of 5?C. Compare this performance with the heat transfer of a solid silver bar of the same di- mensions by finding the rat..
Describe the part of the electron while in magnetic field : A electron enters a magnetic field of 0.3 T at an angle of 45 degrees and with a speed of 5 E5 m/s. Find the force on the electron . Describe the part of the electron while in the magnetic field.
What is the resistance of the platinum wire : Two wires are identical, except that one is silver (resistivity = 1.59×10-8 ?·m) and the other is platinum (resistivity = 1.06×10-7 ?·m). The silver wire has resistance of 1.56 m?. What is the resistance of the platinum wire?
In a double-slit experiment-second-order bright fringe : In a double-slit experiment, the second-order bright fringe is observed at an angle of 0.62°. If the slit separation is 0.10 mm, then what is the wavelength of the light? I'm getting 5.4104e-6 nm? But I'm not sure what I'm doing wrong. I've tried it ..
What is the ratio of the radii of their orbits : A 3.00*10^2-eV electron and a 1.00*10^2-eV electron trapped in a uniform magnetic field move in circular paths in a plane perpendicular to the magnetic field. What is the ratio of the radii of their orbits?
What angle will the second order peak occur : A diffraction grating with 280 lines per mm is used in an experiment to study the visible spectrum of a gas discharge tube. At what angle from the beam axis will the first order peak occur if the tube emits light with wavelength of 400.0 nm? At what ..

Reviews

Write a Review

 

Physics Questions & Answers

  Why is it sometimes better to use a small telescope

Why is it sometimes better to use a small telescope in orbit around the Earth than it is to use a large telescope on a mountaintop?

  Find the height of the balcony

You throw a ball straight down from an apartment balcony to the ground below. Find the height of the balcony

  What is the angle between the net displacement vectors

A bird flies 3.6km due west and then flies 1.2km due north, What is the angle between the net displacement vectors of the 2 birds

  Find the centripetal acceleration of the space shuttle

Suppose the space shuttle is in orbit 400 km from the Earth's surface, Find the centripetal acceleration of the space shuttle in its orbit in m/s2

  What is the resulting compressional force on the earth

Suppose 3.00 g of hydrogen is separated into electrons and protons. What is the resulting compressional force on the Earth

  Illustrate what are the forces on each cable

Two meters from the left end is the 500 N washing equipment. Joe is 0.500 m from the right end and weighs 920 N. Given that the scaffold is in rotational and translational equilibrium, illustrate what are the forces on each cable?

  Q1 a jetliner is moving at a speed of 274 ms the vertical

q1. a jetliner is moving at a speed of 274 ms. the vertical component of the planes velocity is 54.0 ms. conclude the

  What is the thermal energy of this gas

Helium gas is confined in a volume of 3 m3 and is at pressure of 2.1 atmospheres. What is the thermal energy of this gas

  What is the radial acceleration of the bob

Consider a conical pendulum with a 86.0 kg bob on a 10.0 m wire making an angle of ? = 7.00° with the vertical. What is the radial acceleration of the bob

  What is the total force on q3

Three charges make a triangle. Q1 is a 50 uC charge at the origin. Q2 is a -86 uC charge at (.52 m, 0). Q3 is a 65 uC charge at (0, .3). what is the total force on Q3?

  Find is independent of the moment of inertia of the cylinder

An ideal spring is wrapped around a cylinder that is free to rotate with negligible friction about a stationary horizontal axis. Is independent of the moment of inertia of the cylinder

  Locations of maximum compressive-shear and tensile stresses

A 2-2-2 kinematic coupling uses 19-mm silicon nitride balls and tungsten carbide vees. Determine the Hertz contact stresses for a 50 N coupling load. Is this kinematic coupling overloaded? Where are the locations of maximum compressive, shear and ten..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd