Describe the impact of power transmission line on society

Assignment Help Electrical Engineering
Reference no: EM131211474

Power System Analysis and Design

Project- Electrical Design of IIV Power Transmission Lines

A large power company is planning to expand its power transmission capability by adding an 700 MW, 550kV AC overhead power transmission line that runs over a distance of 325 miles. The proposed line will connect 2 hydroelectric generation stations to the load centers in the southwest region of the country where the demand on electric power is expected to increase by 30% in the next 10 years, due to fast growing economy in the region. Mega Power Engineers, Inc. won the bid to perform the required electrical and mechanical designs of the proposed transmission line.

The Board of MPE has decided to go ahead with the project and gave a timeline of 3 mo to the power company and a charge of $2.74M that must be paid by the power company in return of doing all the required design and simulation work. The Engineering Manager at MPE quickly formed a team of 2 civil engineers and 4 electrical engineers to work on the project. From preliminary calculations made by the team, it was agreed upon selecting ACSR conductors and the need for bundle conductors to limit corona discharge and other line parameters. The voltage regulation has to be kept below 10%. In case your best line configuration wouldn't satisfy the voltage regulation, you may propose some kind of reactive power compensation (e.g. series capacitor compensation to boost the voltage.) The main assignments of the design group at MPE were to come up with the followings:

a. The details of the conductors (type, number of strands, etc.)

b. The number of sub-conductors per bundle

c. The diameter of the sub-conductors

d. The spacing between sub-conductors

e. The phase spacing

f. The average height of the line above ground

g. The series resistance per phase in ohms/mi at 50oC

h. The series inductance per phase in mH/mi

i. The shunt capacitance per phase to ground in uF-mi

j. The charging current/phase in A/mi

k. The total charging current/phase in A

l. The electric field profile in kV/cm calculated at 1 meter above ground.

m. The magnetic field profile in A/m calculated at 1 meter above ground

n. The losses of transmission line

o. The transmission efficiency of the HV power transmission line

p. The voltage regulation of the transmission line

q. The size of the series capacitor (if any) used to improve the voltage regulation.

r. Attach a copy of all published material used

s. Describe in 500 words the impact of power transmission line on society

t. Discuss in 300 words the ethics involved in such a project.

Reference no: EM131211474

Questions Cloud

Evaluate the philosophy of public finance : Evaluate the philosophy of public finance. Compare and contrast governmental accounting with non-governmental accounting. Evaluate the relationship between budgeting and financial reporting in the government.
Determine who could be harmed by the ethical situation : Can you Lease make an analyzed of the he Public Company Accounting Oversight Board (PCAOB) by considering the following points: Identify an underlying ethical issue (like the ethics associated with earnings management decisions). Critique of ethical ..
What are the shift register contents : Repeat the preceding problem for the convolutional coder illustrated in Figure 11.47. For the coder shown in Figure 11.47 the shift register contents are S1S2S3S4, where S1 represents the most recent input.
Motivational strategies used by banks to motivate employees : List and explain 8 motivational strategies used by the Banks to motivate employees and what is the impact of this on employee's motivation level and performance?
Describe the impact of power transmission line on society : EENG 4319 - Power System Analysis and Design, Describe in 500 words the impact of power transmission line on society and Discuss in 300 words the ethics involved in such a project.
Capital-abundant relative to the rest of the world : If this economy is capital-abundant relative to the rest of the world, which of these four groups do you expect to support the tariff-elimination bill, and which do you expect to oppose it? Why?
Discuss the economic conditions of australian economy : Discuss the economic conditions of Australian economy associated with the business cycle over the last decade of 2005 and 2015 and discuss the policy initiative for the economy to achieve the full employment level of output.
Matching control plans to control failures : Matching control plans to control failures – there are 10 examples of control plans from Chapters 8 and 9 listed below. Following that list you will find 10 descriptions of control failures. Electronic approvals,Off-site storage of backup computer pr..
Determine the capacity of the channel described by channel : Determine the capacity of the channel described by the channel matrix shown below. Sketch your result as a function of p and give an intuitive argument that supports your sketch. (Note: q = 1 - p:). Generalize to N parallel binary symmetric channe..

Reviews

len1211474

9/19/2016 1:19:16 AM

Submit a cover page with your name and the project title along with the details of your design calculation and analysis. You must write a computer program to calculate the design parameters and you may work in groups of no more than two (individual reports and peer evaluations are required.)

Write a Review

Electrical Engineering Questions & Answers

  Determine the current through each impedance

The three sources in the circuit of Figure P7.44 are connected in wye configuration and the loads in a delta configuration. Determine the current through each impedance.

  Determine the closed-loop transfer function t

a) Determine the closed-loop transfer function, T(s) = Output/Input = Y(s)/R(s) b)Find the time response, y(t) for a step input of r(t) = A for t>0 c)Using the final-value theorem, determine the steady-state value of the output y(t)

  Find what is the intensity level measured at a distance

When played, it produces a sound of 196 Hz. The wavelength of the wave on the guitar string is 1.28 m. A) What is the tension in the string B) If a speaker is using 25 W of power to produce the sound, what is the intensity level measured at a dist..

  Compare the conventional and renormalized som algorithms

Illustrate the comparison between these two algorithms using data drawn from a uniform distribution inside a square and the following two network configurations:

  Calculate power radiated by the antenna

A half wave dipole antenna is operating in air at a frequency of 100 MHz. At a distance of 1000 km and at an observation point ? = ?/2, electric field strength is measured to be 5 µV/m. Calculate the  a. Length of the antenna

  What is the pole location for the amplifier with a gain

Compare the Bandwidths of Two Inverting Amplifiers a) Use Signal Express to measure the 3 dB bandwidth for the inverting amplifier with a gain of -10 and for an inverting amplifier with a gain of -50. b) How does the bandwidth change with gain

  What is the size of an output frame in bits

We need to use asynchronous TDM and combine 50 digital sources. On average only 20% of the sources are active at any time. Each output slot carries 18 bits of data from each digital source. Also 8 extra bits are added to each frame for synchroniza..

  Find the frequency components at the output of the circuit

In a certain communications system a resonant-tuned circuit (tuned at 1200 kHz with Bandwidth = 15 kHz) is connected to the output of a non-linear amplifier (mixer). Find the frequency components at the output of the resonant-tuned circuit

  Calculate back emf of the motor

A six pole, 400 V d.c. motor draws 110 A from the supply. The shunt field resistance is 200 Ohm and the armature resistance is 0.5 Ohm. The armature is wave wound with 600 conductors operates at a speed of 1200 rev/min when supplying full load.

  Calculate for silver the resistivity and the mobility

If 100 meters of silver wire 2 mm in diameter required 8.1 watts when carrying 4 amps of current, calculate for silver the (a) resistivity, (b) mobility, (c) collision time, (d) mean free path, (e) Hall coefficient, and (f) the Hall field in a tra..

  Find beta cutoff frequency of bjt and unity gain frequency

A BJT has beta =100,mod Aie=10 at 10 MHz and it is operating at a collector current of 5 mA.If transition capacitance =10pf 1) calculate beta cutoff frequency of BJT,unity gain frequency and diffusion capacitance

  Find the probability density function of the time interval

The train's departure time from the station is also a random variable that is uniformly distributed between 8:00 am and 8:10 am. a. Find the probability density function of the time interval between the commuter's arrival at station and the train's..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd