Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
1. Derive the sensitivity for a voltage and current source excited Wheatstone bridge.2. Show the balance condition for a Wheatstone bridge is also true in the sinusoidal steady state if the resistances are replaced with complex impedances.
A testing laboratory adjusts the magnetic field until the proton's cyclotron frequency is 10.0 MHz. At this field strength, the Hall voltage on the probe is 0.543 mV when the current through the probe is 0.15 mA.
A transmission line of char. Impedance 100ohm is used to match a 50ohm section to a 200 ohm section. if the matching is to be done both at 429MHz and 1GHz the length of the transmission line can be approx?.
For the vector field Eˆ=5exp(-2r)rˆ-3rzˆ calculate the divergence in cylindrical coordinates. Verify the divergence theorem for the cylindrical region enclosed by r=2, z=0 to 4.
A DC machine has the following parameters: Ra =1Ω, La = 4 mH , kPWM = 100 . (a) Design the current loop with a bandwidth of 1000 rad/s and phase margin of 900. (b)Given a step current command, ia*(t) = 5u(t)A, calculate the actual current,i(t)
A meter being used for a 2-wire resistance measurement has an internal current source of 1 mA. If the meter's test leads have equal resistances of 0.06-ohm, what is the measured resistance for: A resistor of actual value 0.5-ohm
Identify three test cases, one using a positive number, and one using a negative number, and one using incorrect input (ie. Input a letter rather than a digit for the numeric input). For each of the three test cases show what inputs you will use a..
A portion of the wave will reflect from the load and propagate back down the line to arrive at the input once again. Find the power that returns to the input and express this as a loss in decibels when compared to the original 10W input.
Given the following continuous-time system X(t)= [1 0] x(n) + [1]u(t-0.2) [1 1] [0] Determine the pulse-transfer function if a sampling period of Ts = 0.3 is used
A 300 kW, 6600 V, 8-pole, 50 Hz, three-phase, Y-connected, non-salient pole (i.e., cylindrical rotor) synchronous motor has the following parameters: Xs = 72 ohm /phase at 50 Hz, R =10 ohm/phase for operation near base speed, and Efo = 3200 V/phase..
Consider putting down a metal electrode with a 4.50 eV work function on a piece of Ge which has an electron affinity of 4.00 eV, an intrinsic carrier concentration at 300K of 2.5 x 1013/cm3, and that is doped with 1.0 x 1016 donors/cm3.
A separately excited dc generator produces 400 v at 1500 rpm under open circuit conditions. Find the induced emf if the speed changes to 2000 rpm. Assume the flux is constant.
it is found experimentally that electric field in certain region of earth's atmosphere is downward. at an altitude of 300m the field is 58N per C and at altitude of 200m it is 110N per C. Find the net amount of charge contained in a cube 100m on e..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd