Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Derive and graph the electric field based on V-bi( built in Potential). Derive the depletion width (w) from built in potential and equilibrium charge equation. graph Depletion width and E-feild in forward bias.
A 150 MVA, 24 kV, 123% three-phase synchronous generator supplies a large network. The network voltage is 27 kV. The generator operates with an induced voltage, which is twice the rated line-to-neutral voltage.
A 35-year old female worker receives an x-ray exposure of 5.2 rad (whole-body) while carrying out emergency procedures in a nuclear accident. Discuss the health risks assumed by this worker as a result of the radiation exposure.
During calibration, and iron/constantan thermocouple is zeroed( set to emit a Zero Voltage) AT 0 DEGREES CELCIUS. At 750 degrees celcius, it emits a voltage of 38.8mV. Alinear Out/input relationships exists between 0 and 750 degrees celcius.
From the equation for intermediate frequencies, what is thephase angle between the current and electric fieldwhen ωτ = 1, 0.1, and 10. For each case, write an expression for the time dependence of current if the electric fieldvaries as sin(ωτ).
Nominally, the short lead of the diode is the cathode, i.e., the negative lead. However, you can identify the cathode more reliably by noting that one side of the LED's housing has a at spot at the base; the terminal closest to this at spot is the..
A 5V battery, when connected to a 100 ohm load, supplies the load with 40mA. a) determine the internal resistance of the battery. b)what is the battery output under no load conditions under full load conditions c) find the percent voltage regulati..
you have three electric bulbs:100w,75w,60w. if they are in a series circuit and connected to a battery of E=10v, what are the electric voltage across each of them. the bulbs are designed to work in the u.s , that is the working voltage suppose to ..
Assume that one of the pumps uses a1/4hp DC shunt motor with an input voltage of 115VDC that pulls 1.6A running at 1500 rpm. The filed resistance for the motor is 600 ohms and the armature resistance is 8.5 ohms.
Multiple charges at different locations are said to be in equilibrium if the force acting on any one of them is identical in magnitude and direction to the force acting on any of the others. Suppose we have two negative charges
A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.
A steel tire, 10 mm thick, 80 mm wide, and 1500.0 mm inside diameter, is heated and shrunk onto a steel wheel 1500.5 mm in diameter. If the coefficient of static friction is 0.30, what torque is required to twist the tire relative to the wheel
Consider an RLC circuit with a Vs (t)- voltage source. Let the values of the resistor, capacitor, and inductor be unity. Plot the poles and the zeros and the corresponding frequency responses of the filters with the output the voltage
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd