Define a steel cylinder with an internal radius

Assignment Help Mechanical Engineering
Reference no: EM13138122

The answer to Thick cylinders

1. A steel cylinder with an internal radius of 50mm is designed to carry a maximum stress of 400 MPs. It is subjected to an internal pressure of 80 MPs.

(i) Determine the required wall thickness.

(ii) The outer radius of this cylinder is chosen as 70 mm and the internal pressure is increased to 160 MPa. The cylinder is strengthened by shrinking a steel jacket around it to obtain a compound cylinder.

a) Determine the required outer radius of the jacket noting that the maximum hoop stress is 400 MPa, that is, -400 <= sigma_theta <= 400 Mpa.

b) Determine the interference at the mating surface.

Young's modulus E = 200 GPa.

2. A compound cylinder is manufactured by shrinking a steel cylinder of external radius 110mm and internal radius 90 mm onto another steel cylinder of internal radius 70 mm. Note that there is no internal or external pressure applied on the compound cylinder. Only shrink-fit stresses exist.

a) If the maximum tensile stress in the outer cylinder is 100 MPa, determine the radial compressive stress at the common surface.

b) Determine the interference.

c) Determine the maximum stress in the inner cylinder.

Take E = 200 GPa, v = 0.3 for steel.

Reference no: EM13138122

Questions Cloud

Amount of dividends common shareholders : The preferred stockholders were paid $20,000 for each of 2010 and 2009 years respectively. What is the amount of dividends common shareholders will receive in 2011?
How many grams of h2so4 would be produced : If 450 g SO2 escaped into the atmosphere and all the escaped SO2 were converted to H2SO4. How many grams of H2SO4 would be produced in the atmosphere?
Contemporary security challenges : Discuss contemporary security challenges for the 21st Century that face the United States and other industrialized nations. List examples of federal regulations and HSPDs that were implemented to deter and prevent attacks against the U.S.
Problem related to finished-goods inventory : If a company sells goods that cost $70,000 for $82,000, the firm will: A. reduce Finished-Goods Inventory by $70,000. B. reduce Finished-Goods Inventory by $82,000.
Define a steel cylinder with an internal radius : A steel cylinder with an internal radius of 50mm is designed to carry a maximum stress of 400 MPs. It is subjected to an internal pressure of 80 MPs.(i) Determine the required wall thickness.
Presence of hezbollah and al qaeda in turkey : Does the presence of Hezbollah and al Qaeda in Turkey pose a significant threat to other European countries?
What do sociologist do as professionals? : what do sociologist do as professionals? what sorts of information and skills can be gained from sociology classes. what sorts of career opportunities can a sociology major provide the student in the job market who is not interested in becoming a car..
Candy and i were going : Candy and I were going through the last year's financial statements (year ended 31 December 2012) and I discovered that the income tax expense account was significantly lower than the income tax the company actually paid to the Australian Taxation Of..
What is the frequency of radio wave radiation : Radio wave radiation falls in the wavelength region of 10.0 to 1.00E+3 meters. What is the frequency of Radio wave radiation that has a wavelength of 426 m.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Vital information about overall heat transfer coefficient

Important information about Overall Heat Transfer Coefficient A copper sphere of internal diameter 2 m and wall thickness 40 mm is insulated with 75 mm of expanded polystyrene

  Determine the latent heat of vaporization of the water vapor

How would you calculate the sensible heat, the latent heat, and determine the latent heat of vaporization of the water vapor in this air stream as the air is cooled from 170 F to 48 F?

  Newtons law to find the tension in the string

draw a free body diagram for each of the two situations. use the "radial" Newton's law to find the tension in the string at each of these situations.

  Explain employing the ideal gas model

Employing the ideal gas model, determine the change in specific entropy between the indicated states, in Btu/lbmol?ºR. Solve 2 ways: Use the appropriate ideal gas table AND also by using a constant specific heat value.

  Explain specific load and heat generated per minute

Design Engineering: Find Specific Load and Heat Generated Per Minute, A load of 6400 Kg is carried by a journal rotating in a 270 mm bearing diameter and 400 mm long. Find the specific load on the bearing and the heat generated per minute in the b..

  Explain the maximum flow past a circular cylinder

The maximum flow past a circular cylinder is 2 X the Up stream velocity. The max velocity occurs at the center line of the top of the cylinder.

  Explain heat pump is used to maintain a house at a constant

A heat pump is used to maintain a house at a constant temperature of 23 °C. The house is losing heat to the outside air through the walls and the windows at a rate of 60,000 kJ/hr while the energy generated within the house from people

  Steam enters the turbine of a simple vapor power plant

Steam enters the turbine of a simple vapor power plant with a pressure of 160 bar and a temp of 560 C and expands adiabatically to 0.08 bar

  An ideal vapor-compression refrigeration system operates

An ideal vapor-compression refrigeration system operates at steady state with Refrigerant 134a as the working fluid. Superheated vapor enters the compressor at 30 lbf/in2, 20F, and saturated liquid leaves the condenser at 140 lbf/in2. The refriger..

  Explain vector integral - stokes therom

Vector integral - stokes therom, Evaluate the line integral by stokes theorem (clock wise as seen by a person standing at the origin).

  Diameter sphere is embedded in insulation

A 4 m diameter sphere is embedded in insulation. The sphere contains a liquid-ice mixture maintained at 0 deg C. The ambient temperature surrounding the insulation is 25 deg C.

  Explain steady flow air compressor

A steady flow air compressor compresses 50 lb/min from 14 psia and 80 degrees F to a discharge state at 45 psia and 300 degrees F. Heat departs from the air only via circulating water that enters the jacket at 75 degrees F and leaves at 95 degrees..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd