Consider an ideal simple rankine cycle with steam

Assignment Help Mechanical Engineering

Reference no: EM13705968

Consider an ideal simple rankine cycle with steam as the working fluid. Saturated vapor enters the Turbine at 8 MPa and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 100MW. Find the efficiency, bwr, mass flow rate of steam, Q input rate, Q output rate and mass flow rate of H20. If cooling water enters the condenser at Ti=15 C and Te=35 C. Isentropic efficiency for the pump and turbine are 85%. Solve for bwr, mass flow rate of steam, Q rate boiler, Q rate condenser, mass flow rate of h20, W rate in turbine and pump.

Reference no: EM13705968

Questions Cloud

Short cylinder whose top and bottom surfaces are insulated : Consider a short cylinder whose top and bottom surfaces are insulated. The cylinder was initially at a uniform temperature of Ti. At time t=0, the cylinder is suddenly subjected to a convection from its side surface to a surrounding fluid at temperat..

Determine the specific volume at the indicated state : For each case, determine the specific volume at the indicated state. Locate the state on a sketch of the T-v diagram.

Determine the specified property data at the indicated state : Using the tables for water, determine the specified property data at the indicated states. In each case, locate the state on sketches of the p-v and T-v diagrams.

Determine the overall surface efficiency : A 30-cm-long, 1-cm-diameter aluminium fin (k=237 W/mÂ·K) is exposed to an environment at 22oC. The base temperature of the fin is maintained at 80 oC. The heat transfer coefficient between the rod and the surrounding air is 11 W/m2Â·K.

Consider an ideal simple rankine cycle with steam : Consider an ideal simple rankine cycle with steam as the working fluid. Saturated vapor enters the Turbine at 8 MPa and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 100MW.

Determine the temperature at center plane of the brass plate : A hot brass plate is having its upper surface cooled by impinging jet of air at temperature of 15 [Degree Celsius] and convection heat transfer coefficient of 220 W/(m^2*K). The 10-cm thick brass plate ( p=8530kg.m^3, Cp=380J/(kg*K), k=110 W/(m*K), a..

Heat pump cycle delivers energy by heat transfer to dwelling : A Heat pump cycle delivers energy by heat transfer to a dwelling at a rate of 40,000 Btu/h.The coefficient of performance of the cycle is 2.8. Determine the power input to the cycle, in hp.

Neglect effects of gravity and kinetic energy : A rigid container with volume V is originally filled with water of Temperature T1. A hose is then connected to an inlet port and hotter water of temperature T2 is pumped into the container at mass flow rate m in., while another venting port allows th..

Water is heated until the tank contains only saturated vapor : A closed, rigid tank is filled with water. Initially, the tank holds 9.9 ft^3 saturated vapor and 0.1 ft^3 saturated liquid, each at 212F. The water is heated until the tank contains only saturated vapor.

User Account

All Pages