Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
An LTI (linear, time invariant)instrument has the following impulseresponse:h(t)=[2*e -2t -e -t] *u(t)where u(t) is the unit step function
Compute the system's transfer function and the solution of the differential equation when the input x(t)=2 *u(t).
BJT Amplifiers Sketch an emitter-follower circuit with R1 = R2 = 50kohm ; RE = 2kohm. The collector of the npn transistor is connected to VCC = 5V and the input signal has an internal resistance, RS = 0.5kohm
Low doped silicon is used in partide detectors, in order to obtain a wide depletio region. Consider a pn junction with p-side doping Na = 5 X 1012 cm-3 and n side doping Nd = 1017 cm ".
A signal is bandlimited to 20kHz. The band between 16 and 20 kHz is corrupted by noise such that the information is unrecoverable. Determine the analog lowpass filter maximum frequency to eliminate corrupted noise.
A radar transmits a monotone pulse of 5-s duration. Suppose the radar were redesigned so that the same pulse envelope is frequency modulated with linear FM over 100 MHz. (a) What is the possible new range resolution
A 25 cm length of coaxial cable with inner radius of a=2 mm, and the outer radius of 4 mm, is filled with air. If the total charge on inner conductor is 50nano-Coulombs, what are the charge densities of the inner and outer conductors
1-If the AB current in a Y-connected load has an angle of -14°, what is the angle of the a-phase current. (0 decimals in degrees) 2-If the current of the a-phase in a Y-connected load has an angle of -73°
1) What is the difference between Vin and Vo in a voltage clipping circuit with a zener diode 2) Does Vzo of a zener depend on the temperature of the surrpunding 3) Why is it necessary to put a resistor in a voltage regulator cirucit with a zener di..
the capacitance varies depends on the distance of the two plates from 0 to about 20in. this model is needed to generate an input to an other part of the circuit to simulate it and obtain the output in PSPICE.
Design a clock that displays seconds from 0 to 30 on the FPGA 7-segment displays, with a reset button that resets the clock value at any time.
a 14-bit successive approximation adc is used to sample a signal that has a full-scale range of 8V and a clock frequency of 12 MHz and a jitter of 50ns.initially this is used without a sample and hold amplifier.
The Bandwidth of a broadband signal is 6 MHz and it's maximum frequency is 106Mhz. What is the most likely carrier frequency. WHich of the follwing is not a fundamental characteristics determines the effectiveness of a communication system.
A core-type transformer rated at 37.5 kVA, 2400/480 V, and 60 Hz has a core whose mean length is 1.07 m and whose cross-sectional area is 95 cm^2. The application of rated voltage causes a magnetic field intensity of 352 A-t/m (rms)
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd