Compute the secondary and primary phasor currents

Assignment Help Electrical Engineering
Reference no: EM13252449

Using one transformer

A) Draw the correct circuit to serve a 2.4kv single-phase load from a 7.2kV source. If the load is 50kva at pf=.8 lagging, compute the secondary and primary phasor currents. is this a step-up or step-down application?

B)Draw the correct circuit to serve a 7.2kv single-phase load from a 2.4kv source. If the laod is 50kVa atpf=.8 lagging, compute the secondary and primary phasor currents. is this a step-up or step-down application?

C)Can a 9.6kV load be served from a 7.2kV source using this transfomer? if so, Draw the correct circuit, and determine the maximum load(kVA)

D) can a 2.4 kV 3-phase load be served from a 12.47 kV 3-phase source? if so, state the HV and LV connection(wye,delta); draw the correct circuit and determine the maimum load (kVA).

E) On the circuit diagram of (D) inicate and evaluate all source currents (3), all Load current(3), and all transformers winding current (6), magnitudes only, no phase angles, at maximum load.

Reference no: EM13252449

Questions Cloud

Define effuse in the same time under the same conditions : If 0.00523 mol N2O(g) effuses through an orifice in a certain period of time, how many moles of N2O5(g) would effuse in the same time under the same conditions
What is the voltage drop across the capacitor : A 5.00?F capacitor that is initially uncharged is connected in series with a 5.50k? resistor and an emf source with E= 145V negligible internal resistance, Just after the circuit is completed, what is the voltage drop across the capacitor
Explain the anode and cathode half reactions : of an apparatus that could be used to electroplate a ton spoon with Ag. Label the anode and cathode, suggest an electrolyte, and write the anode and cathode half reactions. explain how the process takes place.
How the individual and organizational coping strategies : how the individual and organizational "coping strategies" may fit in , The primary responsibility for managing work-related stress lies with the employing organization?
Compute the secondary and primary phasor currents : Draw the correct circuit to serve a 7.2kv single-phase load from a 2.4kv source. If the laod is 50kVa at pf=.8 lagging, compute the secondary and primary phasor currents. is this a step-up or step-down application
What must the members of an action learning team : What must the members of an Action Learning Team (ALT) consider in an attempt to address the problem and build toward a positive mental model conducive to company survival?
Analyze the importance of the pre-solicitation notice : Analyze the importance of the pre-solicitation notice
Explain species diamagnetic and which paramagnetic : Which of the following species would you expect to be diamagnetic and which paramagnetic? (a) K+; (b) Cr3+; (c) Zn2+; (d) Cd; (e) Co3+; (f) Sn2+; (g) Br.
Which child has the larger linear speed : Two children ride on a merry-go-round. One is 2 m from the axis of rotation and the other is 4 m from it. Which child has the larger linear speed and acceleration

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find out the minimum signal to noise ratio

Determine the minimum signal to noise ratio (s/n) in dB required in each communication channel to achieve a data rate of 270 kbps?

  How the half-adder can be constructed just with nand gates

HALF-ADDER: S = XY' + X'Y , C = XY (These are the outputs) 1. From the equation given for half-adder, develop an equation for which the half-adder can be constructed just with NAND gates. Draw the circuit as per the equation obtained.

  Calculate the m3-h of total gas entering the reactor at stp

Pure ethylene (C2H4) and oxygen are fed to a process for the manufacture of ethylene oxide (C2H4O) C2H4 + ½ O2? C2H4O The process flow diagram is shown below. The catalytic reactor operates at 300 °C and 1.2 atm. Under these conditions

  Find what is the frequency of oscillation

Given R = 50Kohm and C = 100nF what is the frequency of oscillation Given a required frequency of oscillation of f = 10kHz and R = 8kohm, what should the value of C be

  Find the z-parameters representation for the circuit

A BJT is operated in a 50ohm circuit  1.5Ghz. FOr the bias conditions of Collector Current - 4mA and Collector-Emittor Voltage = 10V. The manufacturer provides the S-parameters in magnitude and angles (in degrees) as follows. S11 = 0.7

  Compute the mutual inductance between the input and output

The electric motors unmanned drones use transformers to produce sufficient current to move the flight surfaces. Due to the weight restrictions of the vehicle, the transformers use a ceramic rather than iron, the ceramic has a permeability of mu = 4..

  Give empirical equations relating saturation temperature

Make a table showing Temperature as a function of pressure for Psat from 20 to 600 psia every 20 psi, and another table showing pressure as a function of temperature from 150 degrees to 350 degrees every 20 degrees.

  Compare the one pole rc filters used in an active setup

1 To double the corner frequency in the low-pass and high pass two-pole filters, how would you change the values of the resistors and capacitors .2 Compare the one pole RC filters used in an active setup versus the passive setup

  Determine the phase angle between the inverter

Determine the phase angle between the inverter fundamental voltage,VC1, and grid side voltage such that the power delivered to the grid is 10 kW and the fundamental current leads VS by 150°. Calculate the reactive power to the grid and draw the ph..

  Find equivalent impedance of transformer of low-voltage

A 3-phase 230 V, 9 kVA, 0.9 PF (lagging) load is supplied by 10 kVA, 1330/230 V, 60 Hz three-phase transformer connected in Y-?. The equivalent impedance of transformer referred to the low-voltage side is 0.12 + j0.25.

  Find the values of i and v for the circuits

Find the values of I and V for the circuits assuming diode are ideal. Consider Vin=0,2,6, and 10V. Also plot V vs. Vin for Vin ranging from -10V to +10V

  How much coal must be burned to produce amnt of electricity

From your group, pick 3 mobile phones, and/or portable devices that are rechargeable. Estimate (using resources and available data), how much electricity that is used to charge them on a weekly basis

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd