Compute the net work done by the gas during the cycle

Assignment Help Physics
Reference no: EM13305422

Suppose 1.0 mol of a monatomic ideal gas initially at 10 L and 337 K is heated at constant volume to 674 K, allowed to expand isothermally to its initial pressure, and finally compressed at constant pressure to its original volume, pressure, and temperature.

A.) What is the net energy entering the system (the gas) as heat during the cycle?

B.) What is the net work done by the gas during the cycle?

C.) What is the efficiency of the cycle?

Reference no: EM13305422

Questions Cloud

Which approach do you favor and why : There are two primary approaches to measuring financial returns on IT investments: 1) Total Cost of Ownership (TCO) and 2) Return on Investment (ROI). Describe each of these approaches and analyze the advantages and disadvantages of each with a fo..
What is the films index of refraction : A 390 nm thick film floats on a puddle of water. When illuminated normally with 700 nm light there is no reflection, but 400 nm light is strongly reflected. What is the film's index of refraction
Determine the location of the center of gravity of the cast : determine the location of the center of gravity of the cast aluminum block
What distance do move in 3 sec and what is tension in cord : Body A and body B are connected by an inextensible cord. If both bodies are released simultaneously from rest, what distance do they move in 3 sec and what is the tension in the cord. The weight of A is 50 lb and the weight of B is 10 lb.
Compute the net work done by the gas during the cycle : Suppose 1.0 mol of a monatomic ideal gas initially at 10 L and 337 K is heated at constant volume to 674 K, What is the net work done by the gas during the cycle
Java is a complete development language and platform : You have learned that Java is a complete development language and platform.
How many shares will be outstanding after the dividend : Assume the company issues a 10 percent stock dividend. How many shares will be outstanding after the dividend?
What is the velocity of the ions relative to the earth : Spaceships of the future may be powered by ion-propulsion engines in which ions are ejected from the back of the ship to drive it forward. What is the velocity of the ions relative to the earth
What percent removal of particles would be expected : if the settling velocity of a particle is 2.80 mm/s and the overflow rate of an up flow clarifier is 0.560 cm/s, what percent of the particles are retained in the clarifier. If the flow rate of this problem is doubled

Reviews

Write a Review

Physics Questions & Answers

  Find the maximum extension of the spring

Two blocks with mass m1=2kg and m2=3kg hang on either side of a pulley. Block m is on an incline at 30 degrees, Find the maximum extension of the spring.

  What is the pressure of the gas

An expandable cylinder has its top connected to a spring with force constant 2 x10^3 N/m. The cylinder is filled with 6 L of gas with the spring relaxed at a pressure of 1.0 atm and a temperature of 20°C.

  Find the gauge pressure at the bottom of the tank

A large tanker truck can carry 30 ton (30,000 lb) of liquid. (a) What volume of water can it carry? (b) What volume of gasoline can it carry.

  Induced current in a loop situated in a magnetic field

Assume the square wire loop is replaced with a smaller one, made of the same wire that is 0.02 m on a side, half as long as the original.

  The magnitudes of components of ship''s displacement vector

A hollow aluminium cylinder is to be fitted over a steel piston. At 22°C the inside diameter of the cylinder is 99.2 percent of the outside diameter of the piston. To what common temperature must the two pieces be heated in order that the cylinder ju..

  What fraction of the volume of liquid mercury

Atomic nuclei have a typical density of about 10^(17) kg/m^3. The density of liquid mercury is roughly 10^(4) kg/m^3. Approximately what fraction of the volume of liquid mercury is empty space between mercury nuclei?

  Find out the feed rate and time to complete the cut

The end milling cutter has two teeth and its diameter = 15.0mm. Find out the feed rate and time to complete the cut.

  What is the minimum time necessary for crossing

What is the minimum time necessary for crossing.

  Find out the speed of the bullet/block combination

strikes the wooden block of a ballistic pendulum, as shown. The block has a mass of 270 g. Find out the speed of the bullet/block combination immediately after the collision.

  Where will this wood eventually come to rest

Whole blood has a surface tension of 0.068 N/M & a density of 1050kgm-3.what weight can whole blood rise in a capillary blood vessel that has radius 2.0 x 10-6 if the contact is zero.

  Write x-versus-t equations of motion

Write x-versus-t equations of motion

  Produce a low- pitch by altering the length of the string

A 5 kg toy race car can move along an x axis. It gives Fx of the force acting on the car, that begins at rest at time t = 0. (The vertical axis is marked in increments of 2.5 N.) what is the momentum at t=6?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd