Compare this result with the heat loss if the window had a

Assignment Help Mechanical Engineering
Reference no: EM13603543

A Thermopane window consists of two 6-mm thick glasses separated by a stagnant air space of thickness 6 mm. The thermal conductivity of the glass is kg = 0. 78 W/mK and that of the air can be taken as ka = 0. 025 W/mK. The convection coefficient for the inside and outside air for the window are hi = 10 and ho=60 W/m2K. Determine the rate of heat loss per square meter of the glass surface for a temperature difference of 40 degree C between the inside and outside air. Compare this result with the heat loss if the window had a single pane of glass of thickness L = 6 mm only instead of the Thermopane.

Reference no: EM13603543

Questions Cloud

A medical study recorded the following information on 75 : a medical study recorded the following information on 75 randomly chosen subjects. in the space provided describe the
Direct collects cash in advance from customers all amounts : direct collects cash in advance from customers. all amounts are in millions of pounds sterling. assume direct collected
Novacar company manufactures automobiles the red card : novacar company manufactures automobiles. the red card division sells its red cars for 25000 each to the general
Each pallet of your product in the warehouse of your : each pallet of your product in the warehouse of your distributor holds 5000 of product at the distributors cost of
Compare this result with the heat loss if the window had a : a thermopane window consists of two 6-mm thick glasses separated by a stagnant air space of thickness 6 mm. the thermal
When a 75 cm long pencil is arranged perpendicular to a : when a 7.5 cm long pencil is arranged perpendicular to a convex mirrors optical axis at a distance of 25 cm from the
Myles company expects to produce 1316400 units of product : myles company expects to produce 1316400 units of product xx in 2012. monthly production is expected to range from
During october shandra company had 97500 of cash receipts : a.during october shandra company had 97500 of cash receipts and 101250 of cash disbursements. the october 31 cash
Will atmospheric water vapor condense on the outside of the : liquid oxygen flows at 90 k inside 3 cm o. d 2 mm wall thickness aisi 302 stainless steel tube with an interior

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Estimate the average temperature the wall will attain

Assuming that the air is 80°F and 1 atm and blows across the wall as on a flat plate, estimate the average temperature the wall will attain for equilibrium conditions.

  What is the elastic modulus of elasticity

a standard steel specimen of 13 mm diameter elongated 22 mm when it was subjected to a tensile force of 29.5 kN if the specimen has a length of 200 mm and that force applied within elastic range. what is the elastic modulus of elasticity ?

  Sketch and annotate the drive train described above

Sketch and annotate the drive train described above. What's the overall system gear ratio? Formula, Substitute/Solve,

  Determine the speed va and angle ua at which the ball was

it is observed that the time for the ball to strike the ground at b is 2.5 s. determine the speed va and angle ua at

  What are the forces acting on workpiece

What are the forces acting on workpiece during turning process. how workpiece should be clamp

  Calculate the mass flow

Calculate the mass flow (in slugs/per second) that comes out the exit of the engine. The plane is at standard altitude 50,000 ft and velocity = 2200 ft/s. Would appreciate attack to problem.

  Calculate the diffusion co-efficient

The diffusion constant (Do) and activation energy (Q) of C in BCC Fe is 0.01 cm2/sec and 80kJ/mol respectively. In FCC Fe, the values are 0.21 cm2/sec and 148kJ/mol. At exactly 910oC these two phases can co-exist.

  What are the percentages of the total heat absorption

What are the percentages of the total heat absorption taking place in the economizer, boiler drum and the superheater, respectively? Assume cp of air and water as 1.005 kJ/kg K and 4.2 kJ/kg K, respectively.

  If a particles position is described by the polar

if a particles position is described by the polar coordinates r 2 sin 2u m and u 4t rad where t is in seconds

  1 the contraption below has a face cam with an elliptic

1. the contraption below has a face cam with an elliptic pro?le pushing a push rod against a spring. the face cam is

  A typical gas stove burner supplies a kettle filled

A typical gas stove burner supplies a kettle filled with water at a rate of 15,000 Btu/hr with a flame temperature of 750C

  Calculate the concentration of molybdenum

Calculate the concentration (in weight percent) of molybdenum that must be added to tungsten to yield an alloy that contains 1.51 x 1022 Mo atoms per cubic centimeter.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd