Compare calculated tensile stress with allowable tensile

Assignment Help Mechanical Engineering

Reference no: EM13613103

A 120-in long annealed rod with a cross-section area of 0.86 in2 extruded from 5083 Aluminum alloy has been axially loaded. Under the load the length of the rod

increased to 120.15 in. From appropriate tables it has been found that the extrusion has a modulus of elasticity of 10.2 x 103 ksi and design tensile yield stress Fty=16 ksi.

(a) Assume an allowable stress of 50% of the design value, calculate the tensile stress and the axial load applied to the rod.

(b) Compare calculated tensile stress with allowable tensile stress and find the absolute value of elongation of the rod for the stress equal to allowable.

Reference no: EM13613103

Questions Cloud

The separation between adjacent principal maxima for : two diffraction gratings a and b are located at the same distance from the observation screens. light with the same

Calculate the friction factor and the heat transfer : air at atmospheric pressure and with a mean velocity of 0.5 ms flows inside a thin walled square cross-section duct of

Where there is evidence that the utility of goods in their : a company should determine cost for inventory purposes by the inventory cost flow method most clearly reflecting its

The temperature of the air at the surface is 20c and the : a cylindrical diving bell 3.4 m in diameter and 3.7 m tall with an open bottom is sub- merged to a depth of 145 m in

Compare calculated tensile stress with allowable tensile : a 120-in long annealed rod with a cross-section area of 0.86 in2 extruded from 5083 aluminum alloy has been axially

A 600 capacitor that is initially uncharged is connected : a 6.00 capacitor that is initially uncharged is connected in series with a 4500 resistor and a 506emf source with

Dakota corporation provided the following information : dakota corporation provided the following information regarding its only product sales price per unit 60 dm used 160000

A vertical cylinder of cross-sectional area 006 m2 is : a vertical cylinder of cross-sectional area 0.06 m2 is fitted with a tight-fitting friction- less piston of mass 5.4

Prepare a graph showing the behavior of maintenance costs : the controller of dugan industries has collected the following monthly expense data for use in analyzing the cost

User Account

All Pages