User Account

All Pages

Clculate a the power out of the turbine b the isentropic

Assignment Help Mechanical Engineering
Reference no: EM13603667

Steam at a rate of 5 lbm/s enters an adiabatic turbine at 800 Psia, 1000 F and leaves at an actual condition of 10 Psia, 320 F. Calculate: a) The power out of the turbine, b) The isentropic efficiency, c) Show the process on a T-s diagram for both the actual and isentropic processes with respect to the constant pressure lines, and d) Calculate the entropy generation and irreversibility for this process. Take To=77 F.

Reference no: EM13603667

Questions Cloud

How much will the e85 fuel have to cost per gallon to make : ethanol blended with gasoline can be used to power a flex-fueledcar. one particular blend that is gaining in popularity
A 60 g piece of ice at an initial temperature that is : a 60 g piece of ice at an initial temperature that is unknown is placed into a glass of 250 g of water sitting at room
Now the valve is opened and the entire system is allowed to : a 1 m3 tank containing air at 25oc and 500 kpa is connected through a valve to another tank containing 5 kg of air at
What is the maximum equivalent capacitance that can be : what is the maximum equivalent capacitance that can be obtained by combination of three capacitors of 1.5 microf 2.1
Clculate a the power out of the turbine b the isentropic : steam at a rate of 5 lbms enters an adiabatic turbine at 800 psia 1000 f and leaves at an actual condition of 10 psia
If the radius of the equipotential surface of point charge : if the radius of the equipotential surface of point charge is 13.5 m at a potential of 2.10 kv what is the magnitude of
Current state-of-the-art capacitors are capable of storing : current state-of-the-art capacitors are capable of storing many times the energy of older ones. such a capacitor with a
If the radius of the equipotential surface of point charge : if the radius of the equipotential surface of point charge is 13.5 m at a potential of 2.10 kv what is the magnitude of
What would be the final temperature of 1 m3 of atmosphere : the atmosphere on maris is comprised of mostly carbon dioxide at a pressure of 600 pa that is not a mistake it is in

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Calculate the contact forces at a and b

the 50-kg homogeneous smooth sphere rest on the 30 degree incline A and bears against the smooth vertical wall B. calculate the contact forces at A and B.

  What is the change of energy stored in the battery

A 12 Volt battery is charged by supplying 3 Amps over a period of 6 hours. What is the change of energy stored in the battery if the battery loses 400kJ of heat during charging.

  Calculate the ultimate tensile strength

Calculate the ultimate tensile strength (engineering) of a material whose strength coefficient is 700 MPa and a tensile test specimen which necks at an engineering tensile strain of 0.35.

  Find the orthogonal rake angle of the cutting tool

the friction force acting at the chip-tool interface the main (tengential ) cutting force is 1500N . Find the orthogonal rake angle of the cutting tool?

  Large stationary brayton cycly gas turbine power

Large stationary brayton cycly gas turbine power plant delivers a powr output of 100MW to an electric generator . Minimum temperature is 300K so T1= 300k max temp is 1600k

  A 25kg steel tank having a volume capacity of 250 litres

a 25kg steel tank having a volume capacity of 250 litres is filled with liquid water at room temperature. what is need

  Determine the pressure on the bottom surface of the fluid

a 6.5m tall tank has a rectangular cross?section and is filled with water to a depth of 3.5m. assuming the pressure on

  Determine the initial acceleration of the projectile

This problem came from the "kinematics of particles" part holding the "Determination of the motion of a particle" section, so use the formula relating to this section of this part.

  Compute these two sets of centerline and control limits

Calculate these two sets of centerline and control limits. Once points are plotted, how will the results of these two charts differ?

  Thermocouples imbedded in the rod at location 25 and 120 mm

long circular rod passes through the opening in an oven having air temperature of 400 and is pressed firmly onto the

  Calculate the heat transfer per kilogram

Calculate the heat transfer per kilogram of air between sections (1) and (2), and the stagnation pressure at section (2).

  What is the total force reaction

What is the total force reaction (magnitude) at pin joint O when the square plate is released from rest? Assume the plate has a uniform thickness.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd