Claims to have invented a new air conditioner

Assignment Help Mechanical Engineering
Reference no: EM13702487

An air conditioning company claims to have invented a new air conditioner, which will maintain a room at 22 degrees C while rejecting 105 kj of heat at 42 degrees C. the unit requires 10KJ of work. Is this device believable? Why?

Reference no: EM13702487

Questions Cloud

Water is the working fluid in regenerative rankine cycle : Water is the working fluid in a regenerative Rankine cycle. The pressure and temperature at the turbine inlet are 8MPa and 550?C, respectively, and the condenser pressure is 7.5KPa. The mass flow rate of steam entering the turbine is 176kg/s.
Determine the isentropic efficiency : Steam at 5.0 MPa, 500 degrees C enters an insulated turbine operating at a steady state with a mass flow rate of 7kg/s and exits at 0.3 MPa. Kinetic and Potential energy effects are negligible. Determine the maximum theoretical power that can be deve..
Pressures-temperatures and specific volumes around the cycle : A cycle composed of three processes: poly tropic compression (n=1.5) from 137 kPa and 38 degrees C to state 2, constant pressure from state 2 to state 3 and constant volume from state 3 to state 1. The heat rejected is 1560kj/kg and the substance is ..
Network administrator at netstack college has chosen cisco : The network administrator at Netstack College has chosen Cisco to provide the routers on his network. Recall that there are six buildings on campus with 250 connections each in four buildings, 180 connections in the fifth building, and 80 conne..
Claims to have invented a new air conditioner : An air conditioning company claims to have invented a new air conditioner, which will maintain a room at 22 degrees C while rejecting 105 kj of heat at 42 degrees C. the unit requires 10KJ of work. Is this device believable? Why?
What is a lan how does the implementation of a lan work : You are employed as an engineer for a startup company. The company is now in the planning stage, and some important decisions must be made about what technology will be leveraged. The company is to be headquartered in Chicago, with small branch..
Steady-state temperature distribution in a rod : Steady-state temperature distribution in a rod with heat generation can be represented by the following differential equation: d^2T/dx^2+[-0.1+0.25sin((pi*x)/5)]T=0 where x = distance along the rod [m] and T is the temperature [K]. Obtain a solution ..
Calculate a value in response : Calculate a value in response to the following: Believing that an estimated increase in sales is overly optimistic, a company director is requesting data predicting annual profit if the selling price calculated above is adopted but the change in s..
What is the largest normal stress : A cylindrical pressure vessel has an internal pressure of 500 kPa, 6-mm wall thickness, and an outside diameter of 1.4 m. What is the absolute largest shear stress in the wall of the vessel? What is the largest normal stress?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the net electric output

For a combined turbine-generator efficiency of 83%, determine the net electric output. Disregard the effect of the KE correction factors.

  What is the volume occupied by the water vapor what is the

a frictionless piston-cylinder is filled with 3 liters of water at 250 kpa. initially the temperature of the water is

  What is the initial mass of liquid water if piston hits

frictionless piston in a cylinder with 0.2 kg h2o under it. if piston raises to a given height the piston will hit

  The chute is deployed is -0003 v2 speed v in feet per

the 230000 lb space shuttle orbiter touches down at about 220 mihr. at 200 mihr its drag parachute deploys. at 35 mihr

  An adiabatic steam turbine operates at steady state with

an adiabatic steam turbine operates at steady state with inlet conditions p1500 kpa t1360 c steam leaves the turbine at

  Heat tansfer please find attached some work i need help

please find attached some work i need help with. i have also attached the appendix which the work says is required to

  List and explain three process parameters

h injection molding was portions of the part not filling. List and explain three process parameters that may aid in the correction of this error. What other errors might adjustments in these parameters help allay?

  How long did the electric heating system run that night how

a passive solar house that is losing heat to the outdoors at an average rate of 50000 kjh is maintained at 22 c at all

  Describe one method for manipulation of microstructure and

describe one method for manipulation of microstructure and mechanical properties for each of the following class of

  The load to be applied to the chain is 9000 lbs plot the

suppose because of random variations introduced during fabrication the links of a chain have a random strength whereby

  Combustion products with the molar anaylisis of 10 co2 20

combustion products with the molar anaylisis of 10 co2 20 h2o 70 n2 enter an engines exhaust pipe at 1000f 1atm and are

  Calculate the power of the engine calculate the standard

if the standard deviations are obtained to be 4n-m and 5 rpm for torque-165 n-m and rotational speed-3000 rpm through a

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd