Calculate the voltage at the transmitting end

Assignment Help Electrical Engineering

Reference no: EM13226842

A 60-Hz, single-phase transmission line has a length of 80 miles. Its shunt conductance (G) is 3.4×10?11 S/mile, resistance (R) is 0.1 ?/mile, capacitance (C) is 16 pF/mile, and inductance (L) is 0.56 mH/mile.

Part A:

If 220 kV, 220 MVA with power factor 0.8 lagging is determined to be at the receiving end, calculate the voltage at the transmitting end.

Part B:

If 220 kV, 220 MVA with power factor 0.8 lagging is determined to be at the receiving end, calculate the current at the transmitting end.

Reference no: EM13226842

Questions Cloud

What is the maximum effective data rate of the link : Consider a satellite communication link with a one way propagation delay of 300ms between the sender and receiver, operating at 10Mbps using packets of length 1500bytes. Length of the ACK packet is also 1500 bytes.

What is the received bit pattern corresponding to part a : b) Draw the LFSR circuit to generate the CRC. Generate the CRC by applying the data pattern to the LFSR and verify the answer in part a. c) An error vector is given by X7+ X6+ X4+ X3+1. What is the received bit pattern corresponding to part a

Determine k when two real poles break away from real axis : A closed-loop system has a hold circuit and process as shown below. Determine G(z) when T = 1 and Gp(s) = 2 / (s + 2). A sampled-data system such as that presented in the above problem has a sampling period T = 0.05s

Calculate the inductive reactance per meter of single-phase : Calculate the inductive reactance per meter of a single-phase, 50-Hz, two-wire transmission line. Assume each conductor's radius is 3cm and the distance between the two conductors is 2m .

Calculate the voltage at the transmitting end : A 60-Hz, single-phase transmission line has a length of 80 miles. Its shunt conductance (G) is 3.4×10?11 S/mile, resistance (R) is 0.1 ?/mile, capacitance (C) is 16 pF/mile, and inductance (L) is 0.56 mH/mile.

Specify the value of a smaller inductance : A single-phase, 60-Hz power will be transmitted through the transmission line Each subconductor's radius is 10 cm. There are two configurations, the first one is setting subconductors A and B as a bundle, and C and D as another bundle

Determine what is the frequency of oscillation : For a Wien-bridge oscillator Given R = 20Kohm and C = 10nF what is the frequency of oscillation Given a required frequency of oscillation of f = 3kHz and R = 5kohm, what should the value of C be

Calculate the power converted to mechanical power : A 480 V permanent magnet ac motor is consuming 10 kW at power factor 0.80 lagging. Its speed is 1800 rpm. The winding resistance is 0.5 ohms per phase. Core losses are 100 W. Mechanical losses are 250 W. Stray losses are 1.5% of the input power

Determine what is the transmission angle : A 5 GHz parallel polarized wave with amplitude 5 V/m is oblique incident from an air of (z 0. The angle of incidence is 53.13 deg. What is the transmission angle

User Account

All Pages