Calculate the three-phase steady-state short circuit current

Assignment Help Electrical Engineering
Reference no: EM131153049

Assignment

Problem 1

A 150 MVA, 24 kV, 123% three-phase synchronous generator operates with an induced voltage that is twice the rated line-to-neutral voltage.

Calculate the three-phase steady-state short circuit current.

Problem 2

A 250 MVA, 24 kV, 125% three-phase synchronous generator supplies a large network. The network voltage is 27 kV. The generator operates with an induced voltage, which is twice the rated line-to-neutral voltage. The phase angle between the network voltage and induced voltage is 56 degrees.

Calculate the network real and reactive powers.

Problem 3

A three-phase 60 Hz synchronous generator rated at 15 MVA and 2.2 kV has a synchronous reactance per phase of 13 Ω and spins at 1800 rpm.

(a) Calculate the induced voltage versus load function if the terminal voltage is the rated value and the power factor is 0.8 lagging. Calculate the induced voltage at the rated load and at open circuit conditions.

(b) Calculate and plot the stator short circuit current for variable load conditions if the short circuit occurs across the machine terminals. Use the induced voltage function calculated in part (a).

(c) Determine the short circuit current at both the open circuit condition and at rated load.

Problem 4

A synchronous generator supplies a network through two transformers and a transmission line, as drawn in Figure 8.70.
Figure 8.70 One-line diagram for Problem 8.12.

The generator is rated at 380 MVA and 22 kV with a reactance of 1.2 p.u. The identical transformers are rated at 480 MVA with primary and secondary voltages of 22 kV and 340 kV, respectively, and a 15% reactance. The transmission line is 45 mi long with an impedance of 0.07+j0.5 Ω/mi. The transmission line capacitances are neglected. The network voltage is 21 kV.

(a) Determine the transmission line, generator, and transformer parameters. Draw the equivalent circuit.

(b) Compute the generator excitation (induced) voltage at rated load. Assume that the terminal voltage is the same as the rated voltage, and the power factor is 0.88 lagging.

(c) Calculate the power transmitted to the network if the absolute value of the excitation voltage is the same as the value found in part (b), and the angle between the network and generator excitation voltage varies. Plot the transmitted power versus power angle, and determine the power angle at 350 MW.

Book: Electrical Energy conversion and Transport, 2nd Edition

Reference no: EM131153049

Questions Cloud

Types and sizes of organisations and businesses : Individuals work in all different types and sizes of organisations and businesses in various roles and responsibilities, duties and expectations
Conduct a test hypothesis : conduct a test hypothesis to determine whether the mean salary of the teams was different from $80.0 million. use the .05 significance.
Calculate the dollar market value : Calculate the dollar market value of the interest rate swap entered into by Kapple, at 60 days after the initiation of the swap and using a $1 notional principal.
What constructive feedback would you give to your colleague : Your colleague is a human resources manager who just completed an activity followed by a group discussion. The activity went well, but the debrief did not. As the facilitator, he had trouble getting the group to answer his questions. The group did..
Calculate the three-phase steady-state short circuit current : A 150 MVA, 24 kV, 123% three-phase synchronous generator operates with an induced voltage that is twice the rated line-to-neutral voltage. Calculate the three-phase steady-state short circuit current.
Demonstrates a basic knowledge of the programming language : Write a 2-3 page report over your programming languages topic. This may be either a paper or 2 pages of code that demonstrates a basic knowledge of the programming language.
Brief letter to a citizen of another country : You are an American citizen in the time period of this unit. Write a brief letter to a citizen of another country that the United States is expanding to during this time period. Share why, from your perspective, this expansion is good. In the lett..
What type of hardware did android os run on : What type of hardware did/does this OS run on? What company developed this OS? What year was it first introduced? How long was it in active development? What type of file system did/does the OS use?
Determine significant factors that made the implementation : Using the Internet or Strayer databases, research a company that you believe has done an excellent job in creating, communicating, and executing its stated strategy. Be prepared to discuss.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find group delay between the highest modes

Parallel plate waveguide has plate seperation of 2cm, filled with dielectric material with an index refration of n=3, lenght of wavelengh guide z=50m opertaing at 10 Ghz. a) find the cutoff frequency

  Why live streaming video require a heavy usage of bandwidth

describe with a numerical example the fundamental reason as to why live streaming video require a heavy usage of bandwidth as compared to live streaming audio. give a numerical example.

  Find r. round your answer to the nearest thousandth.

Two resistors of resistance R_1 and R_2, with R_2>R_1, are connected to a voltage source with voltage V_0. When the resistors are connected in series, the current is I_s. When the resistors are connected in parallel, the current I_p from the sourc..

  Determine the transfer function of the overall integrator

Determine the transfer function of the overall integrator.

  Where does the color subcarrier burst reside

Where does the color subcarrier burst reside?

  Calculate the total power consumed in circuit

A current of 5A flows through a resistor connected in series with choke coil. It is supplied with 250 V , 50Hz supply . If potential difference across resistor is 125 and across choke coil is 200 volt .

  What dimensional change can be made to solve the problem

In a particular IC design in which the standard channel length is 2µm, an NMOS device with W/L of 5 operating at 100µA is found to have an output resistance of 0.5MO, about 1/4 of that needed.

  Determine line speed and minimum required bandwidth

Consider a PCM-TDM system in which 24 signals are to be processed. Each signal has a baseband bandwidth of 3 KHz. The sampling rate has to be 33.3% higher than the theoretical minimum, and 8 bits are to be used.

  What is the equivalent continuous flow of power in megawatts

If the U.S. consumes 10 Quads each year by burning gasoline for automobiles, and if this energy usage is spread evenly across 8760 hours in a year, what is the equivalent continuous flow of power in Megawatts (MW)

  Determine the voltage and the voltage polarity across r2

In the given image, determine the voltage and the voltage polarity across R2 just after the switch S1 is opened. Steady state conditions have occurred in the circuit just before switch S1 is opened.

  Explain function of the prime mover in generating process

A)What is the standard frequency of the AC voltage generatedand distributed by an electrical utility. B)Explain the function of the prime mover in the generating process.

  What must the load be to extract maximum power from circuit

Consider a circuit that is connected to a phasor of 120V/0 degrees. The circuit feeds a 10 ohm resistor on the "hot" lead and then the circuit branches. One branch sees a 0.5A /60 degree phasor current source (oriented with "arrow oriented right)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd