Calculate the sensible heat load due to the infiltating air

Assignment Help Mechanical Engineering
Reference no: EM13704654

Outdoor air leaks into a building through cracks in the walls at the rate of 700 m3/h (this is infiltratation). The outside air is at a temperature of -16.1C and a humidity ratio of 0.001 kgv/kga. The density of the outside air is1.4 kg/m3. The indoor conditions are: temperature of 20?C and humidity ratio of 0.009 kgv/kga. Calculate:

a) The sensible heat load (in kW) due to the infiltating air.

b) The latent heat load due (in kW) due to the infiltating air.                          

The specific heat of air at these temperatures is about 1.005 kJ/(kg•?C). The latent heat of vaporization (or condensation) is 2453 kJ/kg.

Reference no: EM13704654

Questions Cloud

Dealing with recruitment and selection process : Both public and private institutions have to deal with internal and external factors when they are dealing with recruitment and selection process.
Titanium is stiffer than aluminum : Titanium is stiffer than aluminum, has a lower thermal expansion coefficient than aluminum, and has a higher melting temperature than aluminum. On the same graph, carefully and schematically draw potential well curves for both metals. Be explicit in ..
Required for the compression and the final pressure of gas : A gas is contained in a piston of 5 m^3 at 100 KPa. Then the gas is compressed till its volume is reduced to 2.5 m^3. If there was no exchange of heat from the system during the compression process, calculate the work required for the compression and..
Determine the coefficient of performance of the machine : An air-conditioner using R-134a as the working as the working fluid maintains a space at a constant temperature of 23 degrees celsius while rejecting heat to the outside at 37 degrees celsius. The rate of heat gain in the space is 5.0kW.
Calculate the sensible heat load due to the infiltating air : Outdoor air leaks into a building through cracks in the walls at the rate of 700 m3/h (this is infiltratation). The outside air is at a temperature of -16.1C and a humidity ratio of 0.001 kgv/kga. The density of the outside air is1.4 kg/m3. The indoo..
Mass fractions of the contents are in the liquid phase : The professor takes a 3 liter empty can and fills it with saturated water vapor at 100 deg. C, 1 atm. He seals the can and immerses it in ice water. If the can is perfectly rigid, what is the final pressure in the can? And what mass fractions of the ..
How experience helped sharpen your communication skills : Describe a time when you had to learn about a new culture or way of life - explain how the experience helped sharpen your communication skills. Explain how you were enriched by the experience.
Low pass butter worth filter has a corner frequency : A low pass butter worth filter has a corner frequency of 1 khz and a roll-off of 24 db per octave in the stop band. If the output amplitude of a 3 khz sine wave is .1 V, what will be the output amplitude of a 20 khz sine wave if the input amplitudes ..
Determine the average normal stress in the shank : The long bolt passes through the 4 in. thick plate. If the force in the bolt shank is 50 lb, determine the average normal stress in the shank, the average shear stress along the cylindrical area of the late defined by the section lines a-a, and the a..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Factors affecting the decision for the job offer

Discuss five factors which you are going to consider before making a decision whether to accept or reject the offer and Prepare an organization structure

  Plot the maximum efficiency of a nuclear power plant as a

the environment in a certain area is 15 degrees c. plot the maximum efficiency of a nuclear power plant as a function

  Wat is the time expression for the motor response if the

the 500 lbf motor is supported on springs with a total stiffness of 5000 lbfin. the springs have a damping ratio of

  What are the corresponding values of tensile strength yield

a cylindrical steel rod 0.5 in diameter is cold worked to reduce the area. the new diameters in 3 cases are 0.43in

  Sketch the shear force and bending moment diagrams for the

a beam of square cross section bd20cm is 2 m long and simply supported at both ends. it carries a 100 n point load

  Fluidized bed boiler system by making the most appropriate

500 mw of thermal capacity and t 450 deg c p 80 bar boilers of thermal power plant in 6000 a valuable and

  The intention is to draw air from the receiver during the

a stoped out area with a volume of 20000 m3 is to be used as a receiver. it is to be charged to an absolute pressure of

  What is the force exerted by the atmosphere downward on the

a pressure vessel of radius 11.0 in is filled with a gas at a pressure of 550.0 psi gauge. the top of the vessel is

  Determine the cutoff ratio rc find the temperature at the

at the beginning of the compression process of an air-standard diesel cycle operating with the compression ratio r 18

  You may assume that the specific heats of the air are

air flows through a tube that has a throttling valve in it. if the tube is perfectly insulated perform a thermodynamic

  Determine the magnitude and coordinate direction angles

Determine the magnitude and coordinate direction angles of F3 so that the resultant of the three forces acts along the positively y axis and has a magnitude of 600lb.

  Implement the controller using mechanical components

Analyze the given plant for its performance in time and frequency domains (transient response, Routh-Hurwitz test, root locus, Nyquist criterion, Bode plot, Nichols chart).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd