Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
An ideal Rankine cycle uses water as its working fluid. The mass flow rate of water through the cycle is 150 kg/s. saturated vapour enters the turbine at 15 MPa and saturated liquid enters the pump at 10 kPa. Cooling water passes through the condenser at a flow rate of 3 000 kg/s.
a) Draw the state points on a T-s diagram.
b) Calculate the power developed by the turbine, in MW.
c) Calculate the rate of heat transfer to the steam passing through the boiler, in MW.
d) Calculate the power consumed by the pump, in MW.
e) Calculate the cycle’s back work ratio.
f) Calculate the cycle’s thermal efficiency.
g) Calculate the temperature rise of the cooling water that flows through the condenser. The cooling water can be treated as an incompressible liquid. There is a negligible drop in pressure of the cooling water as it flows through the condenser.
A 1.2-lb metal bar initially at 2100oR is removed from an oven and quenched by immersing it in a closed tank containing 28 lb of water initially at 620oR. Each substance can be modeled as incompressible. An appropriate constant specific heat value fo..
Gas is contained in a vertical piston-cylinder assembly. The initial volume of the gas is 0.1 m3 and the initial pressure is 500 kPa. The gas undergoes a quasi equilibrium expansion process to a final volume of 0.25 m3. For each case below, determine..
A voltage signal is produced by a transducer. The signal contains its strongest frequency component at 50 Hz (Amplitude = 5.0 V), plus a weaker component at the second harmonic (100 Hz) with amplitude 2.0 V. In addition, there is noise at 60 Hz with..
a chiller is providing 5 tons of cooling to an air handler by cooling water transfer between the two devices. the
a 4-bit ad converter is applied to convert a bipolar signal -5v to 5v. what is the conversion resolution? code width?
an airplane flies horizontally at 55.0 ms. its propellernbspdelivers 1500 n of thrust forward force to overcome
air at the rate of 18 kgs is drawn into the compressor of a jet engine at 55 kpa and -23oc and is compressed reversibly
Movement of stagnant air over a surface typically decreases the pressure that air exerts on the surface it was in contact with, and higher air velocities usually result in more significant pressure drops. This pressure drop from rapidly moving air ac..
A particular polymer has a critical stress intensity parameter of 5 MPa?m^1/ 2 and a strength of 150 MPa. It is being used as a plate that experiences tension. The maximum stress it is designed to experience is 80% of its strength.
an element of material is subjected to the following state of stress.sigmax-40 sigmay100 sigmaz30tauxy-50 tauyz12
a gas turbine for an automobile is designed with a regenerator. air enters the compressor of this engine at 100 kpa and
the elevator an express elevator is to carry passengers from ground level to a lobby where they can catch elevators to
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd