Calculate the pf at sending end of the transmission line

Assignment Help Electrical Engineering
Reference no: EM13258343

A 2400/240-V two-winding transformer has the following parameters,

Req = (0.62) Ohm

Xeq = (0.25 Ohm

Both Req and Xeq are referred to the primary. The core resistance and the magnetization reactance are neglected.

Three of the above single phase transformers are connected as a 3-phase transformer bank. The high voltage side of the transformer bank is connected in Y and the power is supplied to the transformer bank through a transmission line with an impedance equal to ZTL = j 2 Ohm.

The transformer bank is supplying two different three-phase loads connected to the 240 V side of the transformer bank as follows,

Load 1: 100 kVA, 0.85 p.f lagging.

Load 2: 80 kW, 0.9 p.f leading.

a) Determine the rating of the transformer bank (KVA) to supply the above load.

b) Calculate the voltage and current of the sending end of the transmission line.

c) Calculate the p.f. at the sending end of the transmission lines.

d) Based on your calculation in (c), what is the kVAR rating of a three-phase capacitance (or inductance) load to be connected to the secondary side of the transformer to improve the p.f. in (c) to 0.95 lagging.

Reference no: EM13258343

Questions Cloud

Why primary of power transformer have excessive current : Discuss why the primary of a power transformer would have excessive current if the secondary were short-circuited. Why would there be no voltage across the secondary if the primary is open
What is the marginal cost of borrowing : A bank offers two 30 year, fixed rate, fully amortizing LPMs: an 85% LTV loan at 6%, and an 80% LTV loan at 5.5%. What is the marginal cost of borrowing if the loan is going to be held for 10 years?
What were the major contributions of melvil dewey : What were the major contributions of Melvil Dewey to the library profession? how did his accomplishment dovetail with other events int the field in the late 1800s?
The synthesis of enzymes in response to changing metabolic : The synthesis of enzymes in response to changing metabolic needs is referred to as
Calculate the pf at sending end of the transmission line : Three of the above single phase transformers are connected as a 3-phase transformer bank. The high voltage side of the transformer bank is connected in Y and the power is supplied to the transformer bank through a transmission line
Processing one batch of the common input : Assuming that no other costs are involved in processing potatoesor in selling products, how much money does the company make from processing one batch of the common input into the end products Xand Y? Show work
What is the equilibrium current : A coil with an inductance of 14.5 H and a resistance of R = 4.0 ohms is suddenly connected to a resistanceless battery with E = 184.2 V. What is the equilibrium current
Explain how judges are nominated within this system : Arizona has a plural executive. Identify each of the constitutional officers included in Arizona's plural executive in order of succession, as well as the two positions not included in succession.
What is the steady-state concentration : A simple way to model air pollution over a city is with a box model that assumes complete mixing and limited capability for the pollution to disperse horizontally or vertically except in the direction of the prevailing winds.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What would be the power dissipated in the same resistors

Two equal resistors R connected in series across a voltage source V dissipate power P. What would be the power dissipated in the same resistors when they are connected in parallel across the same voltage source

  Locate and specify an appropriate sensor

Locate and specify an appropriate sensor if it is to operate at 120 vac as an input to a PLC. Create the ladder diagram program to accomplish the specified control.

  What does the words leads and lag represent in factor

(1) What does the words leads and lag represent in factor In waveform (2) How would you change the power factor if you needed to

  Design a wireless sensor node

Develop a Sensor Circuit using commodity component and design a wireless sensor node using commodity wireless modules

  What is the velocity of the torpedo relative to the earth

A spaceship moves at a speed of 0.85 c away from theEarth. It shoots a star wars torpedo toward the Earth at aspeed of 0.80 c relative to the ship. What is the velocity of the torpedo relative to the Earth

  What is the rms value of the current through the capacitor

a 10uF capacitor is plugged into a 110v rms 60 hz voltage source with an ammeter in series. what is the rms value of the current through the capacitor?

  Determine change in regulated output voltage for situations

A shunt regulator utilizing a zener diode is biased on through a 100ohm resistor. Determine the change in the regulated output voltage for the two situations below a) VI changes +2.0 V, ILoad constant b) ILoad changes +100 mA, VI constan..

  Define what is the maximum bandwidth of the low pass

What is the maximum bandwidth of the low pass filters at the receiving end of the link? What bandwidth would you recommend for the LPFs?

  Describe a system project that might have three iterations

Discuss these possible reasons, indicating which are the most important: The field is so young; such different needs; there are so many types of systems; and people with widely different backgrounds are developing.

  Does given arrangement violate osha standards

A painter is standing on a work platform that is 27 feet above ground level. For fall protection, the worker's safety harness D-ring is attached to a 12-foot shock absorbing lanyard that is securely fastened to the structure at a point 40 feet abo..

  Find what is the source resistance of the sensor

A temperature sensor is specified to provide 2 mV/°C. When connected to a load resistance of 10 k ohm, the output voltage was measured to change by 10 mV, corresponding to a change in temperature of 10°C.

  Determine what is the maximum zener current allowed

For an ideal Zener, is the Zener voltage is 15v and the power rating is 750mW, what is the maximum zener current allowed What is the relationship between base current and collector current called

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd