Calculate the percentage lost by the window

Assignment Help Physics
Reference no: EM13302933

A wall in a house contains a single window. The window consists of a single pane of glass whose area is 0.11 m2 and whose thickness is 3 mm. Treat the wall as a slab of the insulating material Styrofoam whose area and thickness are 10 m2 and 0.15 m, respectively. Heat is lost via conduction through the wall and the window. The temperature difference between the inside and outside is the same for the wall and the window. Of the total heat lost by the wall and the window, what is the percentage lost by the window?

Reference no: EM13302933

Questions Cloud

Find the ratio of the filament areas of the bulbs : Light bulb 1 operates with a filament temperature of 2400 K, whereas light bulb 2 has a filament temperature of 1600 K. Find the ratio A1/A2 of the filament areas of the bulbs
Determine what is the pressure in cell that can be varied : Pure n-butane is contained in a laboratory cell in which the volume can be varied. The cell is maintained at a temperature of 200°F. The volume is changed until a few drops of liquid n-butane are present. What is the pressure in the cell
What will be the nominal annual cost of trade credit : Your company has been offered credit terms on its purchases of 4/30, net 90 days. What will be the nominal annual cost of trade credit if your company pays on the 35th day after receiving the invoice? (Assume a 365-day year.)
Create mind map about electronic health record : Create a mind map for the storage, input/output (I/O), network and other hardware associated with EHR systems
Calculate the percentage lost by the window : A wall in a house contains a single window. The window consists of a single pane of glass whose area is 0.11 m2 and whose thickness is 3 mm. what is the percentage lost by the window
What are the reasons that caused a decline in the shares : What are the reasons that caused a decline in the shares of depository institutions and increased in the shares of investment companies?
Estimate the peak flood tidal flow velocity at the location : As a tide enters a river and propagates upstream, the water depth at a given location is 3.7m . At this location the tide range is 1m . If the dominant tidal compeonent has a period of 12.4 hours, estimate the peak flood tidal flow velocity at thi..
How many units must be ordered in november : Projected sales for October, November, and December are 27,000 units, 29,500 units, and 32,500 units, respectively. How many units must be ordered in November?
What is the temperature of the hot junction : A copper-constantan thermocouple generates a voltage of 4.75 x 10-3 volts when the temperature of the hot junction is 110 °C, what is the temperature in degrees Celsius of the hot junction

Reviews

Write a Review

Physics Questions & Answers

  What is the crates acceleration

A crate of mass 56 kg is attached to one end of a string, and the other end of the string runs over a pulley and is held by a person, what is the crate's acceleration

  What is the tension in cable on counterweight side of pulley

A 2.25×10^4 elevator is to be accelerated upward by connecting it to a counterweight using a light (but strong!) cable passing over a solid uniform disk-shaped pulley. There is no appreciable friction at the axle of the pulley, other than its mass..

  The normal force exerted by the pavement on the tires

The bowling ball has a diameter of 20.6 {rm cm}, and the angle the stick makes with the horizontal is 30.0 {rm ^circ}. You may suppose there is no friction between the stick and the bowling ball, though friction with the floor must be taken into acco..

  Find the linear accelerations of block a

Let the masses of blocks A and B be 4.0 kg and 2.0 kg, in that order, the moment of inertia of the wheel about its axis be 0.400 kg*m^2, and the radius of the wheel be 0.140 m. Find the linear accelerations of block A if there is no slipping between ..

  What would be the diffusion rate in a channel

The diffusion rate for a solute is 4.0 × 10-11 kg/s in a solvent-filled channel that has a cross-sectional area of 0.50 cm2, What would be the diffusion rate m/t in a channel with a cross-sectional area of 0.30 cm2

  What is the value of normal force

Hakeem throws a 10.50 g ball straight down from a height of 2m. The ball strikes the floor at a speed of 7m/s. What was the initial speed of the ball? Presume that air resistance is negligible.

  Find out the separation between the two sources

The magnitude of F is 306 newtons and it points at 93o measured counter clockwise from the positive x-axis. What is the y component (in newtons) of F.

  Resolve the thickness of lead required to reduce intensity

The immediate environment of a reactor contains a large flux of 10 MeV gamma rays. Resolve the thickness of lead required to reduce the intensity by a factor of 1012. Assume the mass absorption coefficient of Pb for 10 MeV photons is m/r = 0.06 cm..

  Calculate the wavelength of the light in water

A narrow beam of sodium yellow light with wavelength 589 nm in vacuum, Determine the wavelength of the light in water

  What will be his least distance of distinct vision

A certain person can see clearly objects at distances between20cm and 250cm from his eyes, what will be his least distance of distinct vision, when he is wearing the spectales

  What is the magnitude of the angular momentum

A thin layer of magnesium fluoride (n = 1.38) is used to coat a flint-glass lens (n = 1.61). What atleast thickness should the magnesium fluoride film have if the reflection of 669 nm light is to be suppressed? suppose that the light is incident a..

  What height above the point of release would block

A 0.200 kg block is placed on a vertical spring (k = 5.00x10^3) and pushed downward, compressing the spring 0.100 m. As the block is free, it leaves the spring and continues to travel upward. What height above the point of release would block reac..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd