Calculate the net cycle work in kj assuming air

Assignment Help Mechanical Engineering
Reference no: EM13212065

A proposed closed system heat engine mimics the Carnot engine except that the heat rejection compressive process is not isothermal. The process has a 100 K change in temperature. The engine has 5 kg of air as the working fluid. Heat is supplied to the air at 1000 K and rejected by the air at an initial temperature of 500 K. The volume doubles during heat addition. At the end of compression, the pressure is 750 kPa. Assume the work is 900 kJ during the heat rejection process. Calculate the net cycle work in kJ assuming air is an ideal gas with constant specific heats.

Reference no: EM13212065

Questions Cloud

Determine the distance traveled : a truck travelling along a straight road at speed 20 km/hr increases its speed to 120 hr/hr in time 15 sec.If its acceleration is constant, determine the distance traveled.
Draw the shear and moment diagrams for the beam : the traveling crane consists of a 5-m-long beam having a uniform mass per unit length of 20kg/m. The chain hoist and its supported load exert a force of 8 kN on the beam when x=2m. draw the shear and moment diagrams for the beam.
Determine the thermal efficiency and the mean effective : If the maximum temperature in the cycle is not to exceed 2200 K, determine the thermal efficiency and the mean effective pressure.
What is the value of ap and mp : The owner of a local store represents his short run production below. Labor is (L) and represents the amount of workers hired, Q is the number of bagels produced per day. The current wage is $100 per day and the firm has $200 per day in fixed cost..
Calculate the net cycle work in kj assuming air : Calculate the net cycle work in kJ assuming air is an ideal gas with constant specific heats.
How to derive the constitutive expression for stress : how to derive the constitutive expression for stress in a Newtonian fluid. How to derive Navier-stokes equation for compressible, incompressible, and invicid flows.
Find ap-mp-tvc-tfc-tc-avc-afc and atc : How do you find AP, MP, TVC, TFC, TC, AVC, AFC, and ATC if the problem gives you a list of # of people doing the labor, quantity produced, fixed costs, and wage rate for example, wage rate is $100 a day, firm has $200 in fixed costs.
Determine the actual and minimum theoretical operating : determine the actual and minimum theoretical operating costs, each in $/day.
What force must be applied to the plunger : the pressure in the vein is known as 1850 Pa. what force must be applied to the plunger, so that 1.5 x 10^-6 m^3 of solution can be injected in 5.0 s?

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Develop a dynamic model of a trebuchet

Analysis of the motion of swing including velocity and acceleration plots of all moving parts and projectile analysis of projectile eg: flight path, horizontal distance, deceleration and launch velocity

  Derive the material index for a light flywheel

Roll out a sheet of blu-tack, punch out a disk with your specified radius, assemble a flywheel for testing on an electric drill and determine the approximate critical rotation speed in rpm - SEM212 T1 2014

  What restrictions in the problem are limiting the profit

Solve this problem with a linear programming model. Describe the optimum mix of raw materials and production levels for the products. How much profit does the business make?

  Explain tensile force formulas

Tensile force formulas, A cylindrical steel beam is 2 inches diameter and 6 feet long. The modulus of elasticity is 30 x 1,000,000 psi. If the beam is subjected to a tensile force of 1000 lbs, what will be the resulting unit strain?

  Turbofan engine on a test stand in the maintenance

The explanation provided below, provide the solution to the problem in simple and easy to understand steps. A turbofan engine on a test stand in the maintenance shop is being run at a continuous setting of 22,700 lbs of thrust. The TSFC is 0.5 lbs/..

  Supposing the plant operates on the ideal vapor-compression

Assuming the plant operates on the ideal vapor-compression cycle using refrigerant 134-a between the pressure limits of 120 and 700 kPa, determine

  Determine the stress in a stay at a given temperature

Determine the stress in a stay at a given temperature. A steel 'stay' of effective length 5m is fitted in between the walls of a ships refrigerated compartment when the temperature is 18 degrees centigrade.

  Verify the law for parallelogram of forces

To Verify the law for parallelogram of forces, law for triangle of forces and law of polygon of forces. These laws are very useful to calculate unknown forces in very short time.

  A pitching wedge a golfer is using gives the ball a initial

A pitching wedge a golfer is using gives the ball a initial angle of 50 degrees, what range of velocities (Vo) will cause the ball to land within 3 ft of the hole?

  An ideal vapor-compression refrigeration system operates

An ideal vapor-compression refrigeration system operates at steady state with Refrigerant 134a as the working fluid. Superheated vapor enters the compressor at 30 lbf/in2, 20F, and saturated liquid leaves the condenser at 140 lbf/in2. The refriger..

  Design problem - piston and flywheel

Design Problem - Piston and Flywheel : Analyze the motion of the crankshaft AB and flywheel for 0 ≤ θ ≤ 4Π (two complete rotations of the crankshaft, or all four cycles, beginning and ending at TDC), for different values of the four design paramete..

  Explain mechanical vibrations in a steel beam

Twenty-five samples of steel beam were chosen and tested for Young's Modulus. Eight had a modulus of E = 30 x 10^6 psi. Two had a modulus of E = 29 x 10^6 psi. Fifteen had a modulus of E = 30. x 1-^6 psi.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd