Calculate the max current in the circuit

Assignment Help Physics

Reference no: EM13322786

In a series LRC AC circuit, the resistance is 19 Ohm, the inductance is 21 mH, and the capacitance is 14 micro Farads. The max potential is 131 V and angular freq. is 100 rads/s. Calculate the max current in the circuit

Reference no: EM13322786

Questions Cloud

Find the phase angle between the current and applied voltage : n LRC circuit consists of a 291 Ohm resistor, a 30 micro Farad capacitor, and a 276 mH inductor, find the phase angle between the current and the applied voltage

Calculate the force that the bolt must put on the hatch : A circular hatch, 2-m in diameter has its top 10-feet under water ( fresh water s.g. = 1.0), and is hinged on the bottom, and held closed on the top with a single bolt. Perform a moment balance about the hinge

Critique website that is different to rest of our friends : Web devolving assignment - Critique a website that is different to the rest of our friends-classmates.

Find what is the hydrostatic pressure force on the hatch : A circular hatch, 2-m in diameter has its top 10-feet under water ( fresh water s.g = 1.0), and is oriented vertically in the water column. What is the hydrostatic pressure force on the hatch, in Newtons.

Calculate the max current in the circuit : In a series LRC AC circuit, the resistance is 19 Ohm, the inductance is 21 mH, and the capacitance is 14 micro Farads. Calculate the max current in the circuit

Determine the stress in the wall at two points a and b : The end caps are spherical. The cylinder has length of 30 inc., a diameter of 8 in., and a wall thickness of 0.125 in. Determine the stress in the wall at two points A and B. For each, draw the stresses on a 3-D element.

Depict the structural formula of 3,4-diethyl-3-hexene : Draw the structural formula of 3,4-diethyl-3-hexene. If more than one isomer of this compound exists, then both isomers must be drawn

What stress on the structure will lead to the failure : A structure is designed with a factor of safety of 5.25 psi. If the allowable stress of the structure is 3000 psi. What stress on the structure will lead to its failure

What is the linear distance from the central bright fringe : Two slits with a separation of 8.5 x 10-5 m create an interference pattern on the screen 2.3 m away. what is the linear distance from the central bright fringe to the tenth dark fringe above it

User Account

All Pages