Calculate the mass flow rate

Assignment Help Mechanical Engineering
Reference no: EM13866772

1. Refrigerant R-134a and air streams enter a steady state heat exchanger. The R-134a stream enters with a pressure of 4.1 bar and a temperature of 0°C, and exits at a pressure of 4.0 bar and a temperature of 20°C. At the inlet, the air stream has a volumetric flow rate  of 40 m3/s, the temperature of the air stream is 50°C, and the pressure is 1.01 bar. The air stream exits with a temperature of 20°C and a pressure of 0.99 bar.

(a) Calculate the mass flow rate of R-134a in kg/s.

2. Water and ammonia streams flow through a steady state heat exchanger. The water stream enters the heat exchanger with a velocity of 40 m/s, a temperature of 200°C, and a pressure of 15 bar through a pipe with a diameter of 0.1 m. The water stream leaves as a saturated liquid-vapor mixture with a quality of 0.2. Before entering the heat exchanger, the ammonia stream flows through a throttling valve. At the inlet of the throttling valve the ammonia pressure and temperature are 12 bar and 28°C. At the exit the pressure of the ammonia stream has dropped to 4 bar. The stream then enters the heat exchanger and exits with a temperature of 60°C. The pressure drop across the heat exchanger is negligible for both the ammonia and water streams. Neglect heat transfer to the surroundings.

(a) Determine the mass flow rate of the water stream in kg/s.

(b) Determine the mass flow rate of the ammonia stream in kg/s.

(c) Determine the state of the ammonia after the throttling process. If the ammonia is a saturated liquid-vapor mixture, calculate the quality x2.

1683_Determine the mass flow rate of the water stream.jpg

3. One pound of nitrogen as an ideal gas expands isothermally at 70oF from a volume of 1 ft3 to a volume of 2 ft3. During this  process there is heat transfer to the gas from a single reservoir (the surrounding atmosphere) and the gas does work. Evaluate the work and heat transfer for the process, in Btu. Is this process a violation of the Kelvin-Planck statement of the second law of  thermodynamics? Explain why or why not.

Reference no: EM13866772

Questions Cloud

What is difference of load-time and run-time dynamic linking : In the context of memory management, what are placement and replacement algorithms? In loading programs into memory, what is the difference between load-time dynamic linking and run-time dynamic linking?
Mental health counseling treatment contracts : Mental Health Counseling Treatment Contracts- Review the professional disclosure statement on pages 70-73 of your text, Orientation to the Counseling Profession, which you originally read in your Unit 1 studies
Describe the buddy system of memory allocation : Define latency, transfer and seek time with respect to disk I/O. Describe the Buddy system of memory allocation.
Discuss health promotion concepts related to assessment : Discuss health promotion concepts related to assessment of substance abuse and domestic violence.
Calculate the mass flow rate : Calculate the mass flow rate of R-134a in kg/s.
What does distinctiveness information tell you : What does distinctiveness information tell you about Bruno's behavior? Is Bruno's behavior high or low in distinctiveness and why? What does consistency information tell you about Bruno's behavior? Is Bruno's behavior high or low in consistency and ..
Is reggae music being devalued in jamaican society : Topic: Is Reggae music being devalued in Jamaican society?
Written and photographic documentation of ipv : Discuss the importance of and procedures for both written and photographic documentation of IPV ( Intimate Partner Violence) and elder abuse.
How important is writing to the group as a whole? : How important is writing to the group as a whole?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  During the process the pressure and specific volume are

water vapor in a piston-cylinder assembly undergoes a process from saturated vapor at 150 c to a pressure of 300 kpa.

  If wood beams are available with cross secstions having h2b

a timber beam is to be selected to sustain a maximum transverse shear of vmax 50 kn without exceeding an allowable

  Saturated liquid-vapor mixture of water

Saturated liquid-vapor mixture of water, called wet steam, in a steam line at 1500 kPa is throttled to 50 kPa and 100 C. what is the quality in the steam line?

  What is a double-reduction spur gear train

What is a double-reduction spur gear train and how would be useful in a commercial food waste grinder in which the final shaft rotates at between 40 and 44 rpm is to be designed. The input is from an electric motor running at 850 rpm and delivering 0..

  Calculate the work in kjkg done per unit mass of the steam

steam at 2.5 mpa and 400 c enters an adiabatic steam turbine with a low velocity and leaves with a velocity of 180 ms

  This allows the free-stream velocity to remain constant at

a wind tunnel has a 1-m2 6-m-long test section in which air at standard sea-level conditions moves at 70 ms. it is

  How is mass of the gas filling the erlenmeyer determined

The barometric pressure is reported to be 605.5 torr and the temperature of the water is 22.5 c what is the pressure of dry hydrogen gas in the eudiometer? How is the mass of the gas filling the Erlenmeyer determined?

  A high school project involves building a model ultralight

a high school project involves building a model ultralight airplane. some of the stu- dents propose making an airfoil

  If it takes 6 seconds for the belt to go from zero to the

a conveyor belt runs on 3 in. drums that are driven by a motor. if it takes 6 seconds for the belt to go from zero to

  Consider the electrical conductor assembly in the form of

consider the electrical conductor assembly in the form of four 4 parallel plates that have one edge mounted to a

  Assuming that the sun radiates evenly in all directions

the sun is approximated as a spherical black body with a surface temperature of 5762 k. the irradiation from the sun as

  Determine the amount of heat transferred to the air in kj

4-81 air is contained in a cylinder device fitted with a piston-cylinder. the piston initially rest on a set of stops

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd