User Account

All Pages

Calculate the instantaneous voltage

Assignment Help Electrical Engineering
Reference no: EM13867232

A sine wave has a peak amplitude of 2V and a frequency of 100Hz. Calculate the instantaneous voltage at a time of 250 micro seconds after the waveform passes through the 0-V baseline in a positive direction.

Reference no: EM13867232

Questions Cloud

Generally accepted accounting principles needed : Why is a hierarchy of generally accepted accounting principles needed?
Does the stock price appear to change : Examine the charts for each company. Does the stock price appear to change as a consequence of their announcements? Explain why or why not.
What are the jurisdictions of the accounting standards : What are the jurisdictions of the accounting standards setting bodies GASB, FASAB, and FASB?
The switch moves instantaneously to position : The switch in the circuit has been in position 'a' for a long time. At t=0, the switch moves instantaneously to position 'b'. (a) Find io(t) for t>=0. (b). Find Vo(t) for t>=0.
Calculate the instantaneous voltage : A sine wave has a peak amplitude of 2V and a frequency of 100Hz. Calculate the instantaneous voltage at a time of 250 micro seconds after the waveform passes through the 0-V baseline in a positive direction.
List three unique characteristics of state : List three unique characteristics of state and local governmental accounting as contrasted with business enterprise accounting.
Design the constants k and beta : Design a cord (design the constants k and beta ) so the cord stretches 2.5 times the unstretched length, and the acceleration of the jumper doesn't exceed 3g, and the cord has zero stiffness at the bottom of a 400ft drop.s=elongationk=spring const..
Use superposition only and find the value vab : Use superposition ONLY and find the value Vab• (Hint: For each stage, redraw the circuit in conventional form:for example, voltage source-resistor network, or current source-resistor network).
Systematic approach to solving engineering design problems : Follow a systematic approach to solving engineering design problems-Identify the steps to be followed to move from problem to desired solution(s)

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What are resistivity of material of which wire is made

A wire of radius 1.2 mm carries a current of 2.5 A. The potential difference between points on the wire 44 m apart is 8.6 V. What are the resistivity of the material of which the wire is made.

  Find out the open circuit voltage-v of the cell

Consider a 6 cm2 dye sensitised solar cell with reverse saturation current Jr=10-10A/cm2. When the solar irradiance is 1,000 W/m2, it produces an equivalent photo current/short circuit current of 15 mA/cm2 at 300 K.

  What will change the logic gate and invert the inputs

draw out a schematic that implements a 3-bit XOR gate, but consisting of only 2-bit NAND gates. Your schematic should have from 8-10 NAND gates, but NO other logic function such as OR, AND, INV gates can be in your final design.

  Design the simplest circuit that counts the number of 1s

Now, we want to build a circuit that counts the number of 1s in a 6-bit unsigned numbers using full and half adder circuits as building blocks. Design the simplest circuit that can accomplish this task.

  What channel length must be transistor have

In a MOS cascode amplifier, the cascode transistor is required to raise the output resistance by a factor of 40. (1) If the transistor is operated at Vov=0.2V, what must its VA be

  Find total flux leaving infinitely long cylindrical surface

In cylindrical coordinates ,let D = (pa + za )/[4pie(p^2+z^2)^1.5].Determine the total flux leaving: p z a) The infinitely long cylindrical surface p=7; b) the finite cylindrical,p=7,l z l less than equal to 10.

  Determine the power delivered to the motor

Two batteries with 1.8 voltage and 10.5 Ohm internal resistance each are connected in series. This battery pack is used to boot a small electric motor with 275 Ohm resistance. Find the power delivered to the motor.

  What will now be the required rating of circuit breakers

The fault level at the grid connection point is 1000 MVA. What will now be the required rating of circuit breakers connected to the busbars?

  Find electric feild density as a function of radial distance

A pipe of inner radius 4 cm, outer radius 6 cm, and infinate length is centered on the z-axis. Charge is evenly distributed within the wall of the pipe in the amount of 16 coulombs per meter length.Find and Plot the electric feild density as a fun..

  Determine what is the per-unit rated cold-weather power

A 400-kV transmission line has a hot-weather power rating of1400 MVA. If the transmission line is operating in cold weather, itis rated for 2200 MVA (at 400 kV). The transmission line is undercold weather conditions, and the operating voltage is 3..

  An electric pencil sharpener is rated 240 mw 6 v is

an electric pencil sharpener is rated 240 mw 6 v is connected to a 9-v battery and a series-dropping resistor rx

  Find the value of power gain in db of an amplifier

An amplifier with a voltage gain of +40 dB, an input resistance of 10 kO, and an output resistance of 1 kO is used to drive a 1-kO load. What is the value of Avo Find the value of power gain in dB

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd