Calculate the free-space loss experienced at the frequency

Assignment Help Electrical Engineering
Reference no: EM13274398

A satellite is operated at C-Band (6 GHz in the uplink and 4 GHz in the downlink) for video broadcasting. Calculate the free-space loss experienced at this frequency, if the satellite is in geostationary orbit (GEO), located at 36 000 km above ground level. What is the minimum EIRP needed to provide adequate reception, assuming a receiver sensitivity of -120 dBm and effective antena gain of 20 dBi?

Reference no: EM13274398

Questions Cloud

What is the temperature inside the furnace : The blackbody radiation emitted from a furnace peaks at a wavelength of 3.0 10-6 m (0.0000030 m). What is the temperature inside the furnace
Determine maximum height of a building at centre of path : The transmitter antenna is to be located on a rooftop at 15 m. The receiver antenna is to be installed at 5 m above ground level. determine the maximum height of a building at the centre of the path if transmitter and receiver antennas are separat..
Calculate the received power and the path loss : Calculate the received power and the path loss. Assuming this is the maximum acceptable path loss for the system, how does the maximum system range change at 1 GHz and 10 GHz, assuming all other parameters remain constant
Explain anhydrous magnesium sulfate : If 13.0 g of MgSO4*7H2O is thoroughly heated, what mass of anhydrous magnesium sulfate will remain. Express your answer numerically in grams.
Calculate the free-space loss experienced at the frequency : A satellite is operated at C-Band (6 GHz in the uplink and 4 GHz in the downlink) for video broadcasting. Calculate the free-space loss experienced at this frequency, if the satellite is in geostationary orbit (GEO), located at 36 000 km above gro..
What is the force between the ladder and the wall : A ladder of mass 30 kg and length 5m leans against a frictionless wall. The angle between the ladder and the wall is 37 degree. what is the force between the ladder and the wall
Find the maximum acceptable propagation loss for the system : The speech quality for a particular mobile communication system is just acceptable when the received power at the terminals of the mobile receiver is -104 dBm. Find the maximum acceptable propagation loss for the system, given that the transmit po..
Compute the mass of the ball : A spring with spring constant 10N/m hangs from the ceiling. A ball is attached to the spring and allowed to come to rest. What is its the mass of the ball
Determine the location of the point charge of a line charge : A line charge with density 2nC/m exists at y= -2, x=0. Find the electric field intensity at the origin. Now we wish to place a point charge Q=8nC at such a point so that the total electric field is zero at the origin. Determine the location of the..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the power delivered to r at the critical frequency

C=1000 pF R=10 kohms a. Determine A = Vo/Vi at f = fc for the high-pass filter. b. Determine A = Vo/Vi at two octaves above fc. Is the rise in Vo significant from the f = fc level

  Calculate total charge on plates and potential gradient

The capacitance of a capacitor formed by two parallel metal plates each 200 cm2 in area separated by a dielectric 4 mm thick is 0.0004 microfarads. A p.d. of 20,000 V is applied. Calculate (a) the total charge on the plates

  Estimate all the de sign characteristics of the motor

It is required to design the DC motor dedicated to carry two wagons underground railway train. Each wagon is supposed to carry a maximum of 20 persons. The power utility is supplying the railway by 700 V DC source capable to deliver enough curren..

  What is data rate of digital electrical communication system

What is the data rate of a digital electrical communication system that uses 16 voltage levels to carry multiple bits with one voltage level, where each voltage level is kept at that level for a duration of 2 ms

  Where will be the point where beam of electrons strikes

The end of the plates is 30 cm from the tube screen. The kinetic energy of the electrons is 2.80 keV. If a potential difference of 25.0 V is applied across the deflection plates, by how much will the point where the beam of electrons strikes the s..

  Determine the decimal value of the 8-bit 2s complement

Perform the following addition or subtraction of the given numbers using 8-bit 2's complement representation of the numbers. Parts (a) and (b) are given in decimal, while parts (c)-(e) are given in 8-bit 2's complement. Indicate in each case wheth..

  Determine appropriate vectors and switching times

The balanced 60Hz waveform sample that we must modulate is the point where t=4.4ms. The DC voltage from rail to rail is 300V. assume the q axis and a axis are in same direction. The use of mathCAD is recommended.

  Determine the turns ratio of each transformer and current

Three single-phase transformer are used to form a three-phase transformer bank rated  13.8kV(delta)/120kV(wye). One side is connected to a three-phase load of 12 MVA at 0.8 power factor lagging. Determine the turns ratio of each transformer

  What is the period of the oscillation

A 2.0 kg particle moves along the x axis. Its position varies with time according to x = t + 3.0t^3, Where x is in meters and t is in seconds. (a) Find the work done on the particlein the interval t = 0 to t = 1.70s.

  Find what is steady-state stability and transient stability

1) During a transient fault and a permanent fault on the transmission line of a power network, mention the sequence of a line circuit breaker's operation. 2) During a network fault, the voltage and active power of a synchronous generator drops

  At what time has the energy stored in the inductor decreased

The magnitude of the current in a RL circuit decreases at a rate of 2000 A/s at t=0 and 100 A/s at t=.2s. At what time has the energy stored in the inductor decreased 1 percent of its intial value.

  Find beta and give the exact forced response y phi

Give the zero-input or natural response yn(t), in terms of constants K, and K2. Give the general form of the forced response y phi (t), in terms of a constant beta. Find beta and give the exact forced response y phi (t).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd